Boniface P. T. Fokwa

Boron‐Dependency of Molybdenum Boride Electrocatalysts for the Hydrogen Evolution Reaction

Molybdenum-based materials have been considered as alternative catalysts to noble metals, such as platinum, for the hydrogen evolution reaction (HER). We have synthesized four binary bulk molybdenum borides Mo2 B, α-MoB, β-MoB, and MoB2 by arc-melting. All four phases were tested for their electrocatalytic activity (linear sweep voltammetry) and stability (cyclic voltammetry) with respect to the HER in acidic conditions. Three of these phases were studied for their HER activity and by X-ray photoelectron spectroscopy (XPS) for the first time; MoB2 and β-MoB show excellent activity in the same range as the recently reported α-MoB and β-Mo2 C phases, while the molybdenum richest phase Mo2 B show significantly lower HER activity, indicating a strong boron-dependency of these borides for the HER. In addition, MoB2 and β-MoB show long-term cycle stability in acidic solution.

Synthesis of a missing structural link: the first trigonal planar B4 units in the novel complex boride Ti1+xOs2-xRuB2 (x = 0.6)

The newly synthesized boride Ti(1+x)Os(2-x)RuB(2) (x = 0.6) has a novel structure featuring one-dimensional chains of titanium atoms, one-dimensional strings of face-sharing empty tetrahedral and square pyramidal clusters and, most importantly, trigonal planar and strongly bonded B4 units with a B-B distance of 1.89 A.

Scaffolding, ladders, chains, and rare ferrimagnetism in intermetallic borides: synthesis, crystal chemistry and magnetism.

Single-phase polycrystalline samples and single crystals of the complex boride phases Ti(8)Fe(3)Ru(18)B(8) and Ti(7)Fe(4)Ru(18)B(8) have been synthesized by arc melting the elements. The phases were characterized by powder and single-crystal X-ray diffraction as well as energy-dispersive X-ray analysis. They are new substitutional variants of the Zn(11)Rh(18)B(8) structure type, space group P4/mbm (no. 127). The particularity of their crystal structure lies in the simultaneous presence of dumbbells which form ladders of magnetically active iron atoms along the [001] direction and two additional mixed iron/titanium chains occupying Wyckoff sites 4h and 2b. The ladder substructure is ca. 3.0 Å from the two chains at the 4h, which creates the sequence chain-ladder-chain, establishing a new structural and magnetic motif, the scaffold. The other chain (at 2b) is separated by at least 6.5 Å from this scaffold. According to magnetization measurements, Ti(8)Fe(3)Ru(18)B(8) and Ti(7)Fe(4)Ru(18)B(8) order ferrimagnetically below 210 and 220 K, respectively, with the latter having much higher magnetic moments than the former. However, the magnetic moment observed for Ti(8)Fe(3)Ru(18)B(8) is unexpectedly smaller than the recently reported Ti(9)Fe(2)Ru(18)B(8) ferromagnet. The variation of the magnetic moments observed in these new phases can be adequately understood by assuming a ferrimagnetic ordering involving the three different iron sites. Furthermore, the recorded hysteresis loops indicate a semihard magnetic behavior for the two phases. The highest H(c) value (28.6 kA/m), measured for Ti(7)Fe(4)Ru(18)B(8), lies just at the border of those of hard magnetic materials.

Complete Titanium Substitution by Boron in a Tetragonal Prism: Exploring the Complex Boride Series Ti3−xRu5−yIryB2+x (0 ≤ x ≤ 1 and 1 < y < 3) by Experiment and Theory

Polycrystalline samples and single crystals of four members of the new complex boride series Ti(3-x)Ru(5-y)Ir(y)B(2+x) (0 ≤ x ≤ 1 and 1 < y < 3) were synthesized by arc-melting the elements in a water-cooled copper crucible under an argon atmosphere. The new silvery phases were structurally characterized by powder and single-crystal X-ray diffraction as well as energy- and wavelength-dispersive X-ray spectroscopy analyses. They crystallize with the tetragonal Ti(3)Co(5)B(2) structure type in space group P4/mbm (No. 127). Tetragonal prisms of Ru/Ir atoms are filled with titanium in the boron-poorest phase (Ti(3)Ru(2.9)Ir(2.1)B(2)). Gradual substitution of titanium by boron then results in the successive filling of this site by a Ti/B mixture en route to the complete boron occupation, leading to the boron-richest phase (Ti(2)Ru(2.8)Ir(2.2)B(3)). Furthermore, both ruthenium and iridium share two sites in these structures, but a clear Ru/Ir site preference is found. First-principles density functional theory calculations (Vienna ab initio simulation package) on appropriate structural models (using a supercell approach) have provided more evidence on the stability of the boron-richest and -poorest phases, and the calculated lattice parameters corroborate very well with the experimentally found ones. Linear muffin-tin orbital atomic sphere approximation calculations further supported these findings through crystal orbital Hamilton population bonding analyses, which also show that the Ru/Ir-B and Ru/Ir-Ti heteroatomic interactions are mainly responsible for the structural stability of these compounds. Furthermore, some stable and unstable phases of this complex series could be predicted using the rigid-band model. According to the density of states analyses, all phases should be metallic conductors, as was expected from these metal-rich borides.

Site-preferential design of itinerant ferromagnetic borides: experimental and theoretical investigation of MRh6B3 (M = Fe, Co).

Single-phase polycrystalline samples of the compounds MRh(6)B(3) (M = Fe, Co) as well as single crystals of CoRh(6)B(3) have been synthesized by arc-melting the elements under a purified argon atmosphere in a water-cooled copper crucible. The characterization of the new phases was achieved by using single-crystal and powder X-ray diffraction as well as EDX measurements. The two phases are isotypic and crystallize in the hexagonal Th(7)Fe(3) structure type (space group P6(3)mc, no. 186, Z = 2). In this structure, the magnetically active atoms (Fe, Co) are preferentially found on only one of the three available rhodium sites, and together with rhodium they build a three-dimensional network of interconnected (Rh/M)(3) triangles. Magnetic properties investigations show that both phases order ferromagnetically below Curie temperatures of 240 K (for FeRh(6)B(3)) and 150 K (for CoRh(6)B(3)). First-principles DFT calculations correctly reproduce not only the lattice parameters but also the ground state magnetic ordering in the two phases. These calculations also show that the long-range magnetic ordering in both phases occurs via indirect ferromagnetic coupling between the iron atoms mediated by rhodium. This magnetic structural model also predicts the saturation magnetizations to be 4.02 μ(B) for FeRh(6)B(3) (3.60 μ(B) found experimentally) and 2.75 μ(B) for CoRh(6)B(3). Furthermore, both phases are predicted to be metallic conductors as expected for these intermetallic borides.

New quaternary complex borides, Ti9M2Ru18B8 (Cr, Mn, Co, Ni, Cu, Zn): synthesis, crystal structure and bonding analysis

Abstract Powder samples and single crystals of the Ti9M2Ru18B8 (Cr, Mn, Co, Ni, Cu, Zn) phases were synthesized from the elements and characterized by powder and single-crystal X-ray diffraction as well as energy-dispersive X-ray analysis. The new phases are all isotypic and crystallize in the tetragonal system as substitutional variants of the Zn11Rh18B8-type structure (space group P4/mbm, no. 127). M2 dumbbells are observed and interconnect to each other along the [001] direction to build “ladders”. The M–M dumbbell distances vary from 2.48 to 2.50 Å and the distances between two dumbbells (M2 · · · M2) are all close to 2.97 Å, whereas the chains are well separated from each other by distances of at least 11.20 Å. A strong variation of the unit cell volume with increasing valence electron count is observed in the series. According to the results of tight-binding electronic structure calculations, Ru–B and Ti–Ru contacts are responsible for the structural stability of these phases. The strength of the M–M and M–Ru interactions decreases with increasing valence electron count in the series. Non vanishing density of states at the Fermi level indicates metallic character for all phases.

Graphene- and Phosphorene-like Boron Layers with Contrasting Activities in Highly Active Mo2B4 for Hydrogen Evolution

Two different boron layers, flat (graphene-like) and puckered (phosphorene-like), found in the crystal structure of Mo2B4 show drastically different activities for hydrogen evolution, according to Gibbs free energy calculations of H-adsorption on Mo2B4. The graphene-like B layer is highly active, whereas the phosphorene-like B layer performs very poorly for hydrogen evolution. A new Sn-flux synthesis permits the rapid single-phase synthesis of Mo2B4, and electrochemical analyses show that it is one of the best hydrogen evolution reaction active bulk materials with good long-term cycle stability under acidic conditions. Mo2B4 compensates its smaller density of active sites if compared with highly active bulk MoB2 (which contains only the more active graphene-like boron layers) by a 5-times increase of its surface area.

Titanium Sulfides as Intercalation-Type Cathode Materials for Rechargeable Aluminum Batteries

We report the electrochemical intercalation-extraction of aluminum (Al) in the layered TiS2 and spinel-based cubic Cu0.31Ti2S4 as the potential cathode materials for rechargeable Al-ion batteries. The electrochemical characterizations demonstrate the feasibility of reversible Al intercalation in both titanium sulfides with layered TiS2 showing better properties. The crystallographic study sheds light on the possible Al intercalation sites in the titanium sulfides, while the results from galvanostatic intermittent titration indicate that the low Al3+ diffusion coefficients in the sulfide crystal structures are the primary obstacle to facile Al intercalation-extraction.

Boron: Enabling Exciting Metal-Rich Structures and Magnetic Properties

Borons unique chemical properties and its reactions with metals have yielded the large class of metal borides with compositions ranging from the most boron-rich YB66 (used as monochromator for synchrotron radiation) up to the most metal-rich Nd2Fe14B (the best permanent magnet to date). The excellent magnetic properties of the latter compound originate from its unique crystal structure to which the presence of boron is essential. In general, knowing the crystal structure of any given extended solid is the prerequisite to understanding its physical properties and eventually predicting new synthetic targets with desirable properties. The ability of boron to form strong chemical bonds with itself and with metallic elements has enabled us to construct new structures with exciting properties. In recent years, we have discovered new boride structures containing some unprecedented boron fragments (trigonal planar B4 units, planar B6 rings) and low-dimensional substructures of magnetically active elements (ladders, scaffolds, chains of triangles). The new boride structures have led to new superconducting materials (e.g., NbRuB) and to new itinerant magnetic materials (e.g., Nb6Fe1-xIr6+xB8). The study of boride compounds containing chains (Fe-chains in antiferromagnetic Sc2FeRu5B2), ladders (Fe-ladders in ferromagnetic Ti9Fe2Rh18B8), and chains of triangles (Cr3 chains in ferrimagnetic and frustrated TiCrIr2B2) of magnetically active elements allowed us to gain a deep understanding of the factors (using density functional theory calculations) that can affect magnetic ordering of such low-dimensional magnetic units. We discovered that the magnetic properties of phases containing these magnetic subunits can be drastically tuned by chemical substitution within the metallic nonmagnetic network. For example, the small hysteresis (measure of magnetic energy storage) of Ti2FeRh5B2 can be successively increased up to 24-times by gradually substituting Ru for Rh, a result that was even surpassed (up to 54-times the initial value) for Ru/Ir substitutions. Also, the type of long-range magnetic interactions could be drastically tuned by appropriate substitutions in the metallic nonmagnetic network as demonstrated using both experimental and theoretical methods. It turned out that Ru-rich and valence electron poor metal borides adopting the Ti3Co5B2 or the Th7Fe3 structure types have dominating antiferromagnetic interactions, while in Rh-rich (or Ir-rich) and valence electron rich phases ferromagnetic interactions prevail, as found, for example, in the Sc2FeRu5-xRhxB2 and FeRh6-xRuxB3 series. Fascinatingly, boron clusters (e.g., B6 rings) even directly interact in some cases with the magnetic subunits, an interaction which was found to favor the Fe-Fe magnetic exchange interactions in the ferromagnetic Nb6Fe1-xIr6+xB8. Using less expensive transition metals, we have recently predicted new itinerant magnets, the experimental proof of which is still pending. Furthermore, new structures have been discovered, all of which are being studied experimentally and computationally with the aim of finding new superconductors, magnets, and mechanically hard materials. A new direction is being pursued in our group, as binary and ternary transition metal borides show great promise as efficient water splitting electrocatalysts at the micro- and nanoscale.

Ba3Pt4Al4-Structure, Properties, and Theoretical and NMR Spectroscopic Investigations of a Complex Platinide Featuring Heterocubane [Pt4Al4] Units.

Ba3Pt4Al4 was prepared from the elements in niobium ampules and crystallizes in an orthorhombic structure, space group Cmcm (oP44, a = 1073.07(3), b = 812.30(3), c = 1182.69(3) pm) isopointal to the Zintl phase A2Zn5As4 (A = K, Rb). The structure features strands of distorted [Pt4Al4] heterocubane-like units connected by condensation over Pt/Al edges. These are arranged in a hexagonal rod packing by further condensation over Pt and Al atoms with the barium atoms located inside cavities of the [Pt4Al4](δ-) framework. Structural relaxation confirmed the electronic stability of the new phase, while band structure calculations indicate metallic behavior. Crystal orbital Hamilton bonding analysis coupled with Bader effective charge analysis suggest a polar intermetallic phase in which strong Al-Pt covalent bonds are present, while a significant electron transfer from Ba to the [Pt4Al4](δ-) network is found. By X-ray photoelectron spectroscopy measurements the Pt 4f5/2 and 4f7/2 energies for Ba3Pt4Al4 were found in the range of those of elemental Pt due to the electron transfer of Ba, while PtAl and PtAl2 show a pronounced shift toward a more cationic platinum state. (27)Al magic-angle spinning NMR investigations verified the two independent crystallographic Al sites with differently distorted tetrahedrally coordinated [AlPt4] units. Peak assignments could be made based on both geometrical considerations and in relation to electric field gradient calculations.