Boon-Han Lim

Comparison of Two Sun Tracking Methods in the Application of a Heliostat Field

The basic mathematics and structure of heliostat have remained unchanged for many decades. Following the challenge first made by Ries et al., the non-imaging focusing heliostat recently proposed by Chen et al. provides an alternative in the field of concentrated solar energy. This paper investigates the performance of a heliostat field composed of the newly proposed heliostats. In contrast to the dynamic curvature adjustment proposed in our previous work for a solar furnace, a fixed asymmetric curvature is used here with the spinning-elevation tracking method. This restriction is intended to equalize the manufacture cost of the new heliostat with that of traditional heliostats with azimuth-elevation tracking and spherical curvature. Fixing the curvature results in only partial aberration correction, compared to full correction using the dynamic adjustment of curvature. Nevertheless, the case studies presented in this paper show that the new heliostat design can reduce the receiver spillage loss by 10-30%, and provide a much more uniform performance without large variations with time of day.

General Sun Tracking Formula for Heliostats With Arbitrarily Oriented Axes

The most general form of solar tracking formulae of an arbitrarily oriented heliostat toward an arbitrarily located target on the Earth is presented. With this complete solution, the used azimuth-elevation, spinning-elevation tracking formula, etc., are the special cases of it. Therefore, more application may be sought out for many individual cases in solar engineering. The new form of tracking solution could bring changes in the geometry and structure of the design of heliostat to meet various requirements.

A generic sun-tracking algorithm for on-axis solar collector in mobile platforms

This paper proposes a novel dynamic sun-tracking algorithm which allows accurate tracking of the sun for both non-concentrated and concentrated photovoltaic systems located on mobile platforms to maximize solar energy extraction. The proposed algorithm takes not only the date, time, and geographical information, but also the dynamic changes of coordinates of the mobile platforms into account to calculate the sun position angle relative to ideal azimuth-elevation axes in real time using general sun-tracking formulas derived by Chong and Wong. The algorithm acquires data from open-loop sensors, i.e. global position system (GPS) and digital compass, which are readily available in many off-the-shelf portable gadgets, such as smart phone, to instantly capture the dynamic changes of coordinates of mobile platforms. Our experiments found that a highly accurate GPS is not necessary as the coordinate changes of practical mobile platforms are not fast enough to produce significant differences in the calculation of ...

Dense-array concentrator photovoltaic system using non-imaging dish concentrator and crossed compound parabolic concentrator

Solar concentrating device plays an important role by making use of optical technology in the design, which can be either reflector or lens to deliver high flux of sunlight onto the Concentrator Photovoltaic (CPV) module receiver ranging from hundreds to thousand suns. To be more competitive compared with fossil fuel, the current CPV systems using Fresnel lens and Parabolic dish as solar concentrator that are widely deployed in United States, Australia and Europe are facing great challenge to produce uniformly focused sunlight on the solar cells as to reduce the cost of electrical power generation. The concept of non-imaging optics is not new, but it has not fully explored by the researchers over the world especially in solving the problem of high concentration solar energy, which application is only limited to be a secondary focusing device or low concentration device using Compound Parabolic Concentrator. With the current advancement in the computer processing power, we has successfully invented the non...

A novel anti-theft security system for photovoltaic modules

Solar farms are considered as easy target for thieves because of insufficient protection measures. Existing anti-theft approaches are based on system level and are not very preventive and efficient because these can be bypassed with some technical knowledge. Additionally, it is difficult for security guards to tackle them as robbers come in a form of a gang equipped with heavy weapons. In this paper, a low power auto shut-off and non-destructive system is proposed for photovoltaic (PV) modules to achieve better level of security at module level. In proposed method, the power generation function of the PV module will be shut-off internally and cannot be re-activated by unauthorized personnel, in the case of theft. Hence, the PV module will not be functional even sold to new customers. The system comprises of a microcontroller, a low power position sensor, a controllable semiconductor switch and a wireless reactive-able system. The anti-theft system is developed to be laminated inside PV module and will be ...

Feasibility study of tuned liquid column damper for ocean wave energy extraction

Intermittent nature and low efficiency are the major issues in renewable energy supply. To overcome these issues, one of the possible methods is through a hybrid system where multiple sources of renewable energy are combined to compensate each other’s weaknesses. The hybrid of solar energy and wave energy becomes possible through the introduction of a stable floating platform which enables solar energy generation above it and wave energy harvesting underneath it. This paper is intended to study the feasibility of harnessing ocean wave energy using a tuned liquid column damper (TLCD), a type of passive damping device that is designed to suppress externally induced vibration force at a specific frequency range. The proposed TLCD is to be implemented within a floating offshore structure to serve as a vibration mitigating mechanism by reducing the dynamic response of the structure and simultaneously utilize the flowing motion of liquid within the TLCD for generating electricity. The constructed TLCD prototype...