Bor Z. Jang

Graphene-Based Supercapacitor with an Ultrahigh Energy Density

A supercapacitor with graphene-based electrodes was found to exhibit a specific energy density of 85.6 Wh/kg at room temperature and 136 Wh/kg at 80 °C (all based on the total electrode weight), measured at a current density of 1 A/g. These energy density values are comparable to that of the Ni metal hydride battery, but the supercapacitor can be charged or discharged in seconds or minutes. The key to success was the ability to make full utilization of the highest intrinsic surface capacitance and specific surface area of single-layer graphene by preparing curved graphene sheets that will not restack face-to-face. The curved morphology enables the formation of mesopores accessible to and wettable by environmentally benign ionic liquids capable of operating at a voltage >4 V.

Graphene Surface-Enabled Lithium Ion-Exchanging Cells: Next-Generation High-Power Energy Storage Devices

Herein reported is a fundamentally new strategy for the design of high-power and high energy-density devices. This approach is based on the exchange of lithium ions between the surfaces (not the bulk) of two nanostructured electrodes, completely obviating the need for lithium intercalation or deintercalation. In both electrodes, massive graphene surfaces in direct contact with liquid electrolyte are capable of rapidly and reversibly capturing lithium ions through surface adsorption and/or surface redox reaction. These devices, based on unoptimized materials and configuration, are already capable of storing an energy density of 160 Wh/kg(cell), which is 30 times higher than that (5 Wh/kg(cell)) of conventional symmetric supercapacitors and comparable to that of Li-ion batteries. They are also capable of delivering a power density of 100 kW/kg(cell), which is 10 times higher than that (10 kW/kg(cell)) of supercapacitors and 100 times higher than that (1 kW/kg(cell)) of Li-ion batteries.

Reviving rechargeable lithium metal batteries: enabling next-generation high-energy and high-power cells

Herein reported is a fundamentally new strategy for reviving rechargeable lithium (Li) metal batteries and enabling the emergence of next-generation safe batteries featuring a graphene-supported Li metal anode, including the highly promising Li–sulfur, Li–air, and Li–graphene cells with exceptionally high energy or power densities. All the Li metal anode-based batteries suffer from a high propensity to form Li dendrites (tree-like structures) at the anode upon repeated discharges/charges. A dendrite could eventually penetrate through the separator to reach the cathode, causing internal short-circuiting and even explosion, the main reason for the battery industry to abandon rechargeable lithium metal batteries in the early 1990s. By implementing graphene sheets to increase the anode surface areas, one can significantly reduce the anode current density, thereby dramatically prolonging the dendrite initiation time and decreasing the growth rate of a dendrite, if ever initiated, possibly by a factor of up to 1010 and 105, respectively.

Nitrogen-enriched ordered mesoporous carbons through direct pyrolysis in ammonia with enhanced capacitive performance

Self-assembly of phenolic resins and a Pluronic block copolymer via the soft-template method enables the formation of well-organized polymeric mesostructures, providing an easy way for preparation of ordered mesoporous carbons (OMCs). However, direct synthesis of OMCs with high nitrogen content remains a significant challenge due to the limited availability of nitrogen precursors capable of co-polymerizing with phenolic resins without deterioration of the order of mesostructural arrangement and significant diminishment of nitrogen content during carbonization. In this work, we demonstrate pyrolysis of the soft-templated polymeric composites in ammonia as a direct, facile way towards nitrogen-enriched OMCs (N-OMCs). This approach does not require any nitrogen-containing carbon precursors or post-treatment, but takes advantage of the preferential reaction and/or replacement of oxygen with nitrogen species, generated by decomposition of ammonia at elevated temperatures, in oxygen-rich polymers during pyrolysis. It combines carbonization, nitrogen functionalization, and activation into one simple process, generating N-OMCs with a uniform pore size, large surface area (up to 1400 m2 g−1), and high nitrogen content (up to 9.3 at%). More importantly, the ordering of the meso-structure is well-maintained as long as the heating temperature does not exceed 800 °C, above which (e.g., 850 °C) a slight structural degradation is observed. When being used as electrode materials for symmetric electric double layer capacitors, N-OMCs demonstrate enhanced capacitance (6.8 μF cm−2vs. 3.2 μF cm−2) and reduced ion diffusion resistance compared to the non-NH3-treated sample.