Boris Arshava

Unnatural Amino Acid Replacement in a Yeast G Protein-Coupled Receptor in Its Native Environment

Ste2p is the G protein-coupled receptor (GPCR) for the tridecapeptide pheromone alpha factor of Saccharomyces cerevisiae. This receptor-pheromone pair has been used extensively as a paradigm for investigating GPCR structure and function. Expression in yeast harboring a cognate tRNA/aminoacyl-tRNA synthetase pair specifically evolved to incorporate p-benzoyl- l-phenylalanine (Bpa) in response to the amber codon allowed the biosynthesis of Bpa-substituted Ste2p in its native cell. We replaced natural amino acid residues in Ste2p with Bpa by engineering amber TAG stop codons into STE2 encoded on a plasmid. Several of the expressed Bpa-substituted Ste2p receptors exhibited high-affinity ligand binding, and incorporation of Bpa into Ste2p influenced biological activity as measured by growth arrest of whole cells in response to alpha factor. We found that, at concentrations of 0.1-0.5 mM, a dipeptide containing Bpa could be used to enhance delivery of Bpa into the cell, while at 2 mM, both dipeptide and Bpa were equally effective. The application of a peptide delivery system for unnatural amino acids will extend the use of the unnatural amino acid replacement methodology to amino acids that are impermeable to yeast. Incorporation of Bpa into Ste2p was verified by mass spectrometric analysis, and two Bpa-Ste2p mutants were able to selectively capture alpha factor into the ligand-binding site after photoactivation. To our knowledge, this is the first experimental evidence documenting an unnatural amino acid replacement in a GPCR expressed in its native environment and the use of a mutated receptor to photocapture a peptide ligand.

Structure and topology of a peptide segment of the 6th transmembrane domain of the Saccharomyces cerevisae α-factor receptor in phospholipid bilayers

A detailed analysis of the structure of an 18-residue peptide AQSLLVPSIIFILAYSLK [M6(252-269, C252A)] in 1,2-dimyristoyl-sn-glycero-phosphocholine bilayers was carried out using solid state NMR and attenuated total reflection Fourier transform infrared spectroscopy. The peptide corresponds to a portion of the 6th transmembrane domain of the alpha-factor receptor of Saccharomyces cerevisiae. Ten homologs of M6(252-269, C252A) were synthesized in which individual residues were labeled with (15)N. One- and two-dimensional solid state NMR experiments were used to determine the chemical shifts and (1)H-(15)N dipolar coupling constants for the (15)N-labeled peptides in oriented dimyristoylphosphatidylcholine bilayers on stacked glass plates. These parameters were used to calculate the structure and orientation of M6(252-269, C252A) in the bilayers. The results indicate that the carboxyl terminal residues (9-14) are alpha-helical and oriented with an angle of about 8 degrees with respect to the bilayer normal. Independently, an attenuated total reflection Fourier transform infrared spectroscopy analysis on M6(252-269, C252A) in a 1,2-dimyristoyl-sn-glycero-phosphocholine bilayer concluded that the helix tilt angle was about 12.5 degrees. The results on the structure of M6(252-269, C252A) in bilayers are in good agreement with the structure determined in trifluoroethanol/water solutions (B. Arshava et al. Biopolymers, 1998, Vol. 46, pp. 343-357). The present study shows that solid state NMR spectroscopy can provide high resolution information on the structure of transmembrane domains of a G protein-coupled receptor.

The Conformation and Orientation of a 27-Residue CCR5 Peptide in a Ternary Complex with HIV-1 gp120 and a CD4-Mimic Peptide.

Interaction of CC chemokine receptor 5 (CCR5) with the human immunodeficiency virus type 1 (HIV-1) gp120/CD4 complex involves its amino-terminal domain (Nt-CCR5) and requires sulfation of two to four tyrosine residues in Nt-CCR5. The conformation of a 27-residue Nt-CCR5 peptide, sulfated at Y10 and Y14, was studied both in its free form and in a ternary complex with deglycosylated gp120 and a CD4-mimic peptide. NMR experiments revealed a helical conformation at the center of Nt-CCR5(1-27), which is induced upon gp120 binding, as well as a helical propensity for the free peptide. A well-defined structure for the bound peptide was determined for residues 7-23, increasing by 2-fold the length of Nt-CCR5s known structure. Two-dimensional saturation transfer experiments and measurement of relaxation times highlighted Nt-CCR5 residues Y3, V5, P8-T16, E18, I23 and possibly D2 as the main binding determinant. A calculated docking model for Nt-CCR5(1-27) suggests that residues 2-22 of Nt-CCR5 interact with the bases of V3 and C4, while the C-terminal segment of Nt-CCR5(1-27) points toward the target cell membrane, reflecting an Nt-CCR5 orientation that differs by 180° from that of a previous model. A gp120 site that could accommodate (CCR5)Y3 in a sulfated form has been identified. The present model attributes a structural basis for binding interactions to all gp120 residues previously implicated in Nt-CCR5 binding. Moreover, the strong interaction of sulfated (CCR5)Tyr14 with (gp120)Arg440 revealed by the model and the previously found correlation between E322 and R440 mutations shed light on the role of these residues in HIV-1 phenotype conversion, furthering our understanding of CCR5 recognition by HIV-1.

Structure of a Double Transmembrane Fragment of a G-Protein-Coupled Receptor in Micelles

The structure and dynamic properties of an 80-residue fragment of Ste2p, the G-protein-coupled receptor for alpha-factor of Saccharomyces cerevisiae, was studied in LPPG micelles with the use of solution NMR spectroscopy. The fragment Ste2p(G31-T110) (TM1-TM2) consisted of 19 residues from the N-terminal domain, the first TM helix (TM1), the first cytoplasmic loop, the second TM helix (TM2), and seven residues from the first extracellular loop. Multidimensional NMR experiments on [(15)N], [(15)N, (13)C], [(15)N, (13)C, (2)H]-labeled TM1-TM2 and on protein fragments selectively labeled at specific amino acid residues or protonated at selected methyl groups resulted in >95% assignment of backbone and side-chain nuclei. The NMR investigation revealed the secondary structure of specific residues of TM1-TM2. TALOS constraints and NOE connectivities were used to calculate a structure for TM1-TM2 that was highlighted by the presence of three alpha-helices encompassing residues 39-47, 49-72, and 80-103, with higher flexibility around the internal Arg(58) site of TM1. RMSD values of individually superimposed helical segments 39-47, 49-72, and 80-103 were 0.25 +/- 0.10 A, 0.40 +/- 0.13 A, and 0.57 +/- 0.19 A, respectively. Several long-range interhelical connectivities supported the folding of TM1-TM2 into a tertiary structure typified by a crossed helix that splays apart toward the extracellular regions and contains considerable flexibility in the G(56)VRSG(60) region. (15)N-relaxation and hydrogen-deuterium exchange data support a stable fold for the TM parts of TM1-TM2, whereas the solvent-exposed segments are more flexible. The NMR structure is consistent with the results of biochemical experiments that identified the ligand-binding site within this region of the receptor.

An optimally constrained V3 peptide is a better immunogen than its linear homolog or HIV-1 gp120

Synthetic peptides offer an attractive option for development of a V3-directed vaccine. However, immunization with flexible linear peptides may result in an immune response to multiple conformations, many of which differ from the native conformation of the corresponding region in the protein. Here we show that optimization of the location of a disulfide bond in peptides constrained to mimic the beta-hairpin conformation of the V3, yields an immunogen that elicits a 30-fold stronger HIV-1 neutralizing response in rabbits compared with the homologous linear V3 peptide. The HIV-1 neutralizing response elicited by the optimally constrained peptide is also significantly stronger than that elicited by a gp120 construct in which the V3 is exposed. Neutralization of an HIV-1 strain that shares only 72% identity with the immunizing peptide was demonstrated. The most effective immunogen was also able to neutralize primary isolates that are more resistant to neutralization such as SS1196 and 6535.

Structure of segments of a G protein-coupled receptor: CD and NMR analysis of the Saccharomyces cerevisiae tridecapeptide pheromone receptor.

Peptides representing both loop and the sixth transmembrane regions of the alpha-factor receptor of Saccharomyces cerevisiae were synthesized by solid-phase procedures and purified to near homogeneity. CD, nmr, and modeling analysis indicated that in aqueous media the first extracellular loop peptide E1(107-125), the third intracellular loop peptide I3(231-243), and the carboxyl terminus peptide I4(350-372) were mostly disordered. In contrast, the second extracellular loop peptide E2(191-206) assumed a well-defined structure in aqueous medium and the sixth transmembrane domain peptide receptor M6(252-269, C252A) was highly helical in trifluoroethanol/water (4:1), exhibiting a kink at Pro258. A synthetic peptide containing a sequence similar to that of the sixth transmembrane domain of a constitutively active alpha-factor receptor M6(252-269, C252A, P258L) in which Leu replaces Pro258 exhibited significantly different biophysical properties than the wild-type sequence. In particular, this peptide had very low solubility and gave CD resembling that of a beta-sheet structure in hexafluoroacetone/water (1:1) whereas the wild-type peptide was partially helical under identical conditions. These results would be consistent with the hypothesis that the constitutive activity of the mutant receptor is linked to a conformational change in the sixth transmembrane domain. The study of the receptor segments also indicate that peptides corresponding to loops of the alpha-factor receptor do not appear to assume turn structures.

Synthetic peptides as probes for conformational preferences of domains of membrane receptors

Peptide models have been widely used to investigate conformational aspects of domains of proteins since the early 1950s. A pioneer in this field was Dr. Murray Goodman, who applied a battery of methodologies to study the onset of structure in homooligopeptides. This article reviews some of Dr. Goodmans contributions, and reports recent studies using linear and constrained peptides corresponding to the first extracellular loop and linear peptides corresponding to the sixth transmembrane domain of a G‐protein coupled receptor from the yeast Saccharomyces cerevisiae. Peptides containing 30–40 residues were synthesized using solid‐phase methods and purified to near homogeneity by reversed phase high performance liquid chromatography. CD and NMR analyses indicated that the first extracellular loop peptides were mostly flexible in water, and assumed some helical structure near the N‐terminus in trifluoroethanol and in the presence of micelles. Comparison of oligolysines with native loop residues revealed that three lysines at each terminus of a peptide corresponding to the sixth transmembrane domain of the α‐factor receptor resulted in better aqueous solubility and greater helicity than the native loop residues.

Identification of residue-to-residue contact between a peptide ligand and its G protein-coupled receptor using periodate-mediated dihydroxyphenylalanine cross-linking and mass spectrometry

Fundamental knowledge about how G protein-coupled receptors and their ligands interact is important for understanding receptor-ligand binding and the development of new drug discovery strategies. We have used cross-linking and tandem mass spectrometry analyses to investigate the interaction of the N terminus of the Saccharomyces cerevisiae tridecapeptide pheromone, α-factor (WHWLQLKPGQPMY), and Ste2p, its cognate G protein-coupled receptor. The Trp1 residue of α-factor was replaced by 3,4-dihydroxyphenylalanine (DOPA) for periodate-mediated chemical cross-linking, and biotin was conjugated to Lys7 for detection purposes to create the peptide [DOPA1,Lys7(BioACA),Nle12]α-factor, called Bio-DOPA1-α-factor. This ligand analog was a potent agonist and bound to Ste2p with ∼65 nanomolar affinity. Immunoblot analysis of purified Ste2p samples that were treated with Bio-DOPA1-α-factor showed that the peptide analog cross-linked efficiently to Ste2p. The cross-linking was inhibited by the presence of either native α-factor or an α-factor antagonist. MALDI-TOF and immunoblot analyses revealed that Bio-DOPA1-α-factor cross-linked to a fragment of Ste2p encompassing residues Ser251–Met294. Fragmentation of the cross-linked fragment and Ste2p using tandem mass spectrometry pinpointed the cross-link point of the DOPA1 of the α-factor analog to the Ste2p Lys269 side chain near the extracellular surface of the TM6-TM7 bundle. This conclusion was confirmed by a greatly diminished cross-linking of Bio-DOPA1-α-factor into a Ste2p(K269A) mutant. Based on these and previously obtained binding contact data, a mechanism of α-factor binding to Ste2p is proposed. The model for bound α-factor shows how ligand binding leads to conformational changes resulting in receptor activation of the signal transduction pathway.

Expression and biophysical analysis of two double-transmembrane domain-containing fragments from a yeast G protein-coupled receptor.

Structural characterization of G protein‐coupled receptors (GPCRs) is hindered by the inherent hydrophobicity, flexibility, and large size of these signaling proteins. Insights into conformational preferences and the three‐dimensional (3D) structure of domains of these receptors can be obtained using polypeptide fragments of these proteins. Herein, we report the expression, purification, and biophysical characterization of a three‐transmembrane domain‐containing 131‐residue fragment of the yeast α‐factor receptor, Ste2p. Ste2p TM1–TM3 (G31–R161) was expressed as a TrpΔLE fusion protein in Escherichia coli. The expressed protein was subject to CNBr cleavage to remove the fusion tag and TM1–TM3 was purified by reverse‐phased HPLC. The cleavage product was isolated in yields of up to 20 mg per liter of culture in both unlabeled and uniformly [15N]‐labeled and [15N, 13C, 2H]‐labeled forms. The secondary structure of TM1–TM3 was determined to be helical in a number of membrane mimetic environments, including 2,2,2‐trifluoroethanol (TFE):water and lysomyristoylphosphatidylglycerol (LMPG) detergent micelles by circular dichroism. Preliminary HSQC analysis in 50% TFE:water and LMPG micelles prepared in sodium phosphate and 4‐(2‐hydroxyethyl)‐1‐piperazine ethanesulfonic acid (HEPES) buffers revealed that this fragment is suitable for structural analysis by nuclear magnetic resonance (NMR). Complete backbone assignments and a detailed localization of the secondary structural elements of TM1–TM3 in 50% TFE:water have been achieved.

Peptide fragments as models to study the structure of a G-protein coupled receptor: The α-factor receptor of Saccharomyces cerevisiae

The alpha-factor tridecapeptide initiates mating in Saccharomyces cerevisiae upon interaction with Ste2p, its cognate G-protein coupled receptor (GPCR). This interaction is being used as a paradigm for understanding the structure and mechanism of activation of GPCRs by medium-sized peptides. In this article, the use of fragments of Ste2p to study its structure is reviewed. Methods of synthesis of peptides corresponding to both extramembranous and transmembrane domains of Ste2p are evaluated and problems that are encountered during synthesis and purification are described. The results from conformational analyses of the peptide fragments using fluorescence spectroscopy, CD, infrared spectroscopy, and NMR spectroscopy in organic-aqueous mixtures and in the presence of detergent micelles and lipid bilayers are critically reviewed. The data obtained to date provide biophysical evidence for the structure of different domains of Ste2p and indicate that peptides corresponding to these domains have unique biophysical tendencies. The studies carried out on Ste2p fragments indicate that valuable information concerning the structure of the intact receptor can be obtained by studying peptide fragments corresponding to domains of these polytopic integral membrane proteins.