Börries Kemper

T4 Endonuclease VII Cleaves Holliday Structures

T4 endonuclease VII cleaves Holliday structures in vitro by cutting two strands of the same polarity at or near the branch point. The two unbranched duplexes produced by cleavage each contain a strand break that can be sealed by DNA ligase. This suggests that the cut sites are at the same position in the nucleotide sequence in each strand. The joint action of endonuclease VII and DNA ligase can therefore resolve Holliday structures into genetically sensible products. These observations account for the role of endonuclease VII in the DNA metabolism of phage T4, and provide the first example of an enzyme that acts specifically on branch points in duplex DNA.

Identification and characterization of yeast mutants and the gene for a cruciform cutting endonuclease.

An assay was developed that detected DNA cruciform cutting endonuclease activity in crude extracts of Saccharomyces cerevisiae. A collection of temperature‐sensitive strains was screened using this assay, and a mutant lacking the activity was found. The mutation leading to the enzymatic defect was mapped to the left arm of chromosome XI within 3 cM of the centromere. Cloning of the gene for this endonuclease was achieved by chromosome walking from the nearby PUT3 locus. The gene, called CCE1 (cruciform cutting endonuclease), was sequenced and found to have an open reading frame encoding a 41 kDa protein. The amino acid sequence of this eukaryotic endonuclease shows homology neither to its prokaryotic counterparts nor to other proteins in available databases. A cce1 null mutant has no obvious growth defect, and despite the ability of the CCE1 enzyme to cleave Holliday junction analogs, the mutant shows no defect in meiotic or mitotic recombination. A second cruciform cutting activity was detected in extracts from a cce1 null mutant, indicating that yeast has at least two such enzymes. The only phenotype observed for cce1 mutants is a higher than normal frequency of appearance of petite cells, suggesting that the CCE1 protein is important for the maintenance of mitochondrial DNA.

X‐ray structure of T4 endonuclease VII: a DNA junction resolvase with a novel fold and unusual domain‐swapped dimer architecture

Phage T4 endonuclease VII (Endo VII), the first enzyme shown to resolve Holliday junctions, recognizes a broad spectrum of DNA substrates ranging from branched DNAs to single base mismatches. We have determined the crystal structures of the Ca2+‐bound wild‐type and the inactive N62D mutant enzymes at 2.4 and 2.1 Å, respectively. The Endo VII monomers form an elongated, highly intertwined molecular dimer exhibiting extreme domain swapping. The major dimerization elements are two pairs of antiparallel helices forming a novel ‘four‐helix cross’ motif. The unique monomer fold, almost completely lacking β‐sheet structure and containing a zinc ion tetrahedrally coordinated to four cysteines, does not resemble any of the known junction‐resolving enzymes, including the Escherichia coli RuvC and λ integrase‐type recombinases. The S‐shaped dimer has two ‘binding bays’ separated by ∼25 Å which are lined by positively charged residues and contain near their base residues known to be essential for activity. These include Asp40 and Asn62, which function as ligands for the bound calcium ions. A pronounced bipolar charge distribution suggests that branched DNA substrates bind to the positively charged face with the scissile phosphates located near the divalent cations. A model for the complex with a four‐way DNA junction is presented.

Structural Maintenance of Chromosomes Protein C-terminal Domains Bind Preferentially to DNA with Secondary Structure

Structural maintenance of chromosomes (SMC) proteins interact with DNA in chromosome condensation, sister chromatid cohesion, DNA recombination, and gene dosage compensation. How individual SMC proteins and their functional domains bind DNA has not been described. We demonstrate the ability of the C-terminal domains ofSaccharomyces cerevisiae SMC1 and SMC2 proteins, representing two major subfamilies with different functions, to bind DNA in an ATP-independent manner. Three levels of DNA binding specificity were observed: 1) a >100-fold preference for double-stranded versus single-stranded DNA; 2) a high affinity for DNA fragments able to form secondary structures and for synthetic cruciform DNA molecules; and 3) a strong preference for AT-rich DNA fragments of particular types. These include fragments from the scaffold-associated regions, and an alternating poly(dA-dT)-poly(dT-dA) synthetic polymer, as opposed to a variety of other polymers. Reannealing of complementary DNA strands is also promoted primarily by the C-terminal domains. Consistent with theirin vitro DNA binding activity, we show that overexpression of the SMC C termini increases plasmid loss without altering viability or cell cycle progression.

Endonuclease VII resolves Y-junctions in branched DNA in vitro.

Endonuclease VII (gp 49 of phage T4) resolves four‐way junctions in branched DNAs. We have extended our investigations of the specificity of endo VII and tested its activity with three‐way junctions (Y‐structures) constructed in vitro. Both ‘closed’ and ‘open’ Y‐structures were made, absolutely identical in sequence but differing from each other by a single nick in one of the three arms. Pure Y‐structures were obtained on a preparative scale by annealing plus and minus strands from two M13mp strains. One strain has an inverted repeat of 2 X 31 nucleotides cloned into the single EcoRI site while in the other strain this repeat is absent. The structures were used in reactions with endo VII, which recognizes the branch point of both structures and introduces a characteristic number of nicks, 3′ to the junction in each arm of the structure. Strong and weak sites could be distinguished and the cleavage pattern differed significantly between the two structures. The observed resolution of Y‐junctions by endo VII in vitro is compatible with a model for the resolution of recombinant Y‐branches in DNA.

Model for the interaction of DNA junctions and resolving enzymes

Four-way DNA junctions are thought to be important intermediates in a number of recombination processes. Resolution of these junctions occurs by cleavage of two strands of DNA to generate two duplex molecules. The interaction between DNA junctions and resolving enzymes appears to be largely structure-specific, reflecting a molecular recognition on a significant scale. We propose a working model for this interaction that takes account of the present state of knowledge of the structure of the DNA junction, and the substrate requirements of the enzymes. We note that three different enzymes introduce cleavages at phosphodiester bonds that are presented on one side of the molecule, suggesting that the enzymes selectively interact with this face of the junction. By forcing a junction of constant sequence to adopt one or other of the two possible antiparallel isomers, we show that the junction is cleaved in such a way as to suggest a constant mode of interaction with the protein that is dependent on structure rather than sequence. We propose that the feature that is recognized is a mutual inclination of two DNA helices at approximately 120 degrees. We show that a number of DNA substrates that contain similar inclined helices, such as a three-way junction, bulged duplexes and a duplex that is curved because of repeated runs of oligoadenine sequences, are each cleaved by phage T4 endonuclease VII. This mode of DNA-protein interaction could be significant in either recombination or DNA repair processes.

T4 endonuclease VII resolves cruciform DNA with nick and counter-nick and its activity is directed by local nucleotide sequence

Endonuclease VII of phage T4 resolves Holliday structures in vitro by nicking pairs of strands across the junction. We report here analyses of this reaction between endonuclease VII and a Holliday structure analogue, made in vitro from synthetic oligonucleotides. The enzyme cleaves the structure in a non-concerted way and nicks each strand independently. Combinations of nicks with counter-nicks in strands across the junction resolve the construct. The specificity of the enzyme for DNA secondary structures was tested with a series of branched molecules made from oligonucleotides with the same nucleotide sequence in one strand. Results show that the number, location and relative cleavage efficiencies depend largely on the local nucleotide sequence, rather than on the branch type. In particular, endonuclease VII cleaves a complete four-armed cruciform as efficiently as a three-armed Y-junction or its derivatives, a semi-Y, a fork with two single-strand overhangs, a single-strand overhang, and a nicked DNA. However, exchange or addition of one or more nucleotides within the cleavage area flanking the structural signal for endonuclease VII strongly affects the cleavage pattern as well as their relative efficiency of usage. Examples with a single-stranded overhang are presented and show in summary that the enzyme has a fivefold preference for pyrimidines rather than purines.

Torsional control of double-stranded DNA branch migration

DNA branched junctions are analogues of Holliday junction recombination intermediates. Partially mobile junctions contain a limited amount of homology flanking the branch point. A partially mobile DNA branched junction has been incorporated into a synthetic double-stranded circular DNA molecule. The junction is flanked by four homologous nucleotide pairs, so that there are five possible locations for the branch point. Two opposite arms of the branched junction are joined to form the circular molecule, which contains 262 nucleotides to the base of the junction. This molecule represents a system whereby torque applied to the circular molecule can have an impact on the junction, by relocating its branch point. Ligation of the molecule produces two topoisomers; about 87% of the product is a relaxed molecule, and the rest is a molecule with one positive supercoil. The position of the branch point is assayed by cleaving the molecule with endonuclease VII. We find that the major site of the branch point in the relaxed topoisomer is at the maximally extruded position in the relaxed molecule. Upon the addition of ethidium, the major site of the branch point migrates to the minimally extruded position.

Initiation of heteroduplex-loop repair by T4-encoded endonuclease VII in vitro.

Heteroduplex DNAs with single‐stranded loops of 51 nt or 8 nt were constructed in vitro and used in reactions with purified endonuclease VII (endo VII) from phage T4. The enzyme makes double‐strand breaks by introducing pairs of staggered nicks flanking the loops. Regardless of loop‐size the nicking sites map exclusively at the 3′ side of the loop in the looping strand and at the 3′ side of the base of the loop in the non‐looping strand. The number of potential cleavage sites is small (less than 5) and their distribution depends on DNA sequence. The two closest staggered nicks are 4 bp apart, 2 bp on either side of the loop. Nicking always occurs in the double‐stranded part of the molecules; the single‐stranded loops are not attacked by endo VII. The nicks are introduced in a stepwise fashion and selection of the strand for the first nick depends on the sequence of 31 base pairs flanking the loops.

Insertion mutations in the control region of the galactose operon of E. coli

SummaryGalactose negative mutations are described which reduce the maximum expression of all three gal genes about 100-fold. The residual enzyme synthesis is not or only slightly inducible.These pleiotropic mutations map in the control region of the gal operon. No recombination is observed between these mutations. All mutants revert spontaneously to a Gal+ phenotype. In some mutations wildtype-like as well as constitutive revertants are obtained. The frequency of reversion can be increased by nitrosoguanidine (NG) in all mutants. The revertants, induced by this mutagen, are of a constitutive type.