Bradley K. Vaughn

Aseptic loosening in total hip arthroplasty secondary to osteolysis induced by wear debris from titanium-alloy modular femoral heads.

Since 1984, we have used components made of titanium alloy for total joint arthroplasty. Recently, two patients needed revision hip arthroplasty, approximately three years after the initial procedure, because of aseptic loosening secondary to severe osteolysis that had been induced by metallic debris. Although implants made of titanium alloy have many favorable qualities--most importantly, superb biocompatibility--the alloy is more susceptible to wear by particles of acrylic cement and tends to generate more polyethylene wear than do components made of stainless steel or chromium-cobalt. A new process of implanting ions has reportedly improved resistance to wear as well as fatigue properties and has enhanced the resistance to corrosion of the implants. Although, to our knowledge, only in vitro studies of this process have been reported to date, we recommend avoiding the use of components made of titanium alloy in which ions have not been implanted. We suggest considering the possibility of osteolysis secondary to appreciable metallic debris in patients who have aseptic loosening of titanium-alloy components that were not implanted with ions.

Knee manipulation following total knee arthroplasty. Analysis of prognostic variables.

Abstract In an effort to identify prognostic indicators for knee manipulation, the authors retrospectively reviewed the records of 60 osteoarthritic patients with posterior stabilized knee implants who required manipulation (94 knees) between January 1984 and December 1986. They also studied the records of 28 consecutive osteoarthritic patients who were implanted with 41 posterior stabilized knees between January 1985 and September 1985 whose knees did not require manipulation (control group). In both patient groups the following parameters were assessed and compared: overall knee alignment, joint line elevation, anterior to posterior (AP) dimension of the knee, AP placement of the tibial component, patellar height, obesity, age, preoperative flexion, time of manipulation, single vs bilateral knee implants, final flexion, final Hospital for Special Surgery (HSS) score, and the development of heterotopic ossification. The findings of this study showed that an increase in the AP knee dimension by 12% or greater was a critically independent variable that significantly pre- disposed patients to manipulation. They also show that quadriceps adhesions were another major factor leading to manipulation, and that rupturing of these adhesions led to an increase in heterotopic ossification. This review also indicated that 3 months after knee arthroplasty was a significant time for evaluation because knee flexion and HSS score at this point in the patients recovery positively correlated with the final HSS score.

The efficacy of suction drains after routine total joint arthroplasty

A prospective study of thirty-eight patients (seventy-six knees) who had had a primary bilateral total knee replacement and twelve patients (twenty-four hips) who had had a primary bilateral total hip replacement was conducted to assess the effect of postoperative suction drainage on wound-healing. A suction drain was placed on each patients right operative wound, while no drains were used on the left. Otherwise, the same operative technique and method of closure were used in all wounds. Statistical analysis of the results showed no difference between the two sides with regard to the incidences of swelling or persistent drainage. Return of active function of the quadriceps and of range of motion of the knee in patients who had had a total knee replacement was also unaffected by the use of suction drains. We concluded that the routine use of suction drains for wounds is unnecessary after uncomplicated total joint arthroplasty.

Dislocation following primary posterior-stabilized total knee arthroplasty

From 1981 through 1991, 3,032 primary total knee arthroplasties were performed using the Insall-Burstein Posterior Stabilized Condylar Prosthesis (IB-I, IB-II, and IB-II modified) (Zimmer, Warsaw, IN). Fifteen posterior dislocations occurred: 4 with the IB-I system occurring 2 or more years after surgery, 10 with the IB-II system (8 occurring 6 months after surgery and 2 occurring 2-3 years after surgery), and 1 with the IB-II modified system occurring 9 months after surgery. Statistically significant differences for the rate of dislocation between both the IB-I and IB-II modified arthroplasties versus the IB-II arthroplasties were found (P < .001). In an attempt to identify a cause for these dislocations, the authors retrospectively assessed the 15 dislocated cases with respect to sex, age, weight, height, preoperative and postoperative Hospital for Special Surgery scores, preoperative and postoperative alignment, preoperative versus postoperative reconstruction dimensions, patellar thickness and height, and postoperative flexion and compared the results with those patients who did not experience dislocation. Possible etiologies and mechanisms of dislocation were sought. There were no significant differences between the control and study groups for any variable assessed, with the exception of postoperative flexion, which averaged 118 degrees for the study group and 105 degrees for the control group (P < .001). Conservative management was successful in 11 cases. In September 1988 the IB-II system was introduced; modification of the tibial insert was made in January 1990.(ABSTRACT TRUNCATED AT 250 WORDS)

Preliminary report on the S-ROM constraining acetabular insert: a retrospective clinical experience.

The incidence of dislocation after total hip arthroplasty is significantly higher after revision and in patients with neuromuscular or other complications. To prevent dislocation, 55 patients with multiply revised total hip arthroplasties, unstable hips, and neuromuscular and/or neurologic conditions associated with total hip arthroplasty received implants with the S-ROM constraining acetabular insert. With an average follow up of 30.2 months, 50 patients have not experienced redislocation after insertion. Before S-ROM, our dislocation rate in 176 revision total hip arthroplasties was 19%, but is now 4.5% (P less than .001).

A comparison of intramedullary and extramedullary alignment systems for tibial component placement in total knee arthroplasty

Fifty-two primary total knee arthroplasties (TKAs) using an intramedullary tibial jigging system to obtain ideal tibial alignment (90 degrees +/- 2 degrees) were compared with 62 TKAs using an extramedullary tibial jigging system. The Insall-Burstein total knee system was used in all cases, and all femoral components were positioned with extramedullary jigs. Postoperative evaluation consisted of a standing, hip-to-ankle anteroposterior roentgenogram and measurement of the following angles: (1) femorotibial, (2) tibial component, (3) femoral component, and (4) mechanical axis. Ideal tibial component alignment using the intramedullary system was statistically superior to alignment achieved with the extramedullary system. All other angle comparisons showed no statistical significance.

Delayed wound healing and nutritional deficiencies after total hip arthroplasty.

Ninety-two patients (103 hips) treated with total hip arthroplasty (THA) were assessed before and after operation to determine nutritional status and any correlation with delayed wound healing. Parameters indicative of nutritional status (serum albumin and serum transferrin) were assessed, along with immunologic and anthropometric parameters. Delayed wound healing complicated 34 of the 103 (33%) THAs. The preoperative serum transferrin levels were significantly lower for patients who subsequently developed wound-healing complications. Patients treated with single-stage, bilateral procedures had substantially lower postoperative serum transferrin and serum albumin levels and significantly higher incidences of delayed wound healing (64%) than patients who had single joint procedures (25%). Only preoperative serum transferrin levels showed significant value in predicting which patients would have delayed wound healing. None of the other serologic variables, including serum albumin and total lymphocyte count, proved to be a predictor of delayed wound healing. The preoperative assessment of three variables--serum transferrin value, bilateral procedure, and patient age--resulted in the correct prediction of wound healing outcome in 79% of the patients. This preoperative information, in combination with postoperative monitoring of serum transferrin and albumin levels, should alert the physician to the approach of a malnourished state. The malnourishment is attributable to heightened demands on the bodys basal energy requirements after major orthopaedic surgery and can increase morbidity and prolong the hospital stay.

Use of the Greenfield filter to prevent fatal pulmonary embolism associated with total hip and knee arthroplasty.

We inserted a Greenfield filter prophylactically in forty-two of approximately 4,000 patients who were about to have a total hip or knee replacement, or both, and who were at high risk for pulmonary embolism (Group I). The filter was implanted postoperatively in twenty-four additional patients who had thromboembolic complications or in whom anticoagulation was contraindicated (Group II). None of the patients in Group I and only one in Group II had a fatal pulmonary embolism. Use of the Greenfield filter is a safe, easy, and effective method of preventing fatal pulmonary embolism in selected patients: those who are at exceptionally high risk for thromboembolism, as a method of preoperative prophylaxis; those who have had a thromboembolism and in whom therapeutic anticoagulation is contraindicated; and those who have complications secondary to therapeutic anticoagulation.

Influence of Surface Finish in Total Hip Arthroplasty

The influence of femoral component surface finish was investigated by comparing 2 finishes, precoat and satin finish, for 1 cemented total hip arthroplasty (THA) system using 1 acetabular cup design. All surgeries were performed by a single surgeon in 2 consecutive series. Minimum 2-year follow-up outcomes (36 precoat, 25 satin) were compared using Harris Hip Scores, radiographs, and survivorships. The precoat population experienced significantly more radiographic and debonding failures than the satin-finish population, and significantly more pain (P <.05). Comparing failures and nonfailures within the precoat population disclosed neither significant preoperative nor significant cement-grade differences. Because of failure performance of the precoat surface finish, this surgeon no longer implants these components.

IMPEDANCE PLETHYSMOGRAPHY FOR SURVEILLANCE OF DEEP VENOUS THROMBOSIS FOLLOWING EARLY DISCHARGE OF TOTAL JOINT REPLACEMENT PATIENTS

Between April 1988 and February 1989, 877 patients undergoing total hip (394 patients) and total knee (483 patients) replacement surgeries were given warfarin prophylaxis perioperatively and were tested with impedance plethysmography (IPG) approximately 17 days postoperatively (10 days post-discharge) in the outpatient office. There were 69 positive IPG tests (7.8%). Further assessment of patients with positive IPG results using duplex scanning or venography confirmed DVT in 25 of the 69 patients (3.6%) in the popliteal or thigh areas, and ruled out venous disease in 44 patients. All 25 patients were readmitted for anticoagulation therapy with intravenous (IV) heparin and warfarin. There were no cases of pulmonary embolus. This study indicates that IPG testing is a safe and effective method of screening patients for DVT and its potentially fatal sequela of pulmonary embolus. Furthermore, IPG testing has proven to be cost effective, as it is a relatively simple procedure which can be administered by non-professional personnel in the outpatient office setting.