Brandon Seal

Polymeric biomaterials for tissue and organ regeneration

This paper reviews recent work involving polymeric biomaterials used for skin, cartilage, bone, vascular, nerve and liver regeneration. Skin trauma involves damage to the epidermal, dermal and/or subdermal tissues. Epithelial, dermal and full-thickness replacements are considered. Cartilage research is mainly focused on replacing hyaline cartilage. Researchers investigate both nondegradable polymers, which must provide mechanical stability, and degradable polymers, which must support cartilage regeneration. Natural healing in large bone defects often fails. Materials for bone reconstruction must be biocompatible, offer mechanical properties similar to those of bone and support tissue regeneration. The area of vascular grafts draws attention as improvements to the patency of existing materials are needed. Studies to improve current vascular graft polymers as well as develop new polymers are reviewed below. The design and testing of materials for nerve regeneration, to repair damage caused by illness or accident, is an active area of research. Directional nerve guidance via tubulation is discussed, as are matrix materials to enhance axonal extension. Finally, liver transplantation remains one of the only options for chronic liver disease and the demand for liver transplants far exceeds the number of available organs. The complexity of parameters involved in liver regeneration is presented here.

Tuning cell adhesion by incorporation of charged silicate nanoparticles as cross-linkers to polyethylene oxide.

Controlling cell adhesion on a biomaterial surface is associated with the long-term efficacy of an implanted material. Here we connect the material properties of nanocomposite films made from PEO physically cross-linked with layered silicate nanoparticles (Laponite) to cellular adhesion. Fibroblast cells do not adhere to pure PEO, but they attach to silicate containing nanocomposites. Under aqueous conditions, the films swell and the degree of swelling depends on the nanocomposite composition and film structure. Higher PEO compositions do not support cell proliferation due to little exposed silicate surfaces. Higher silicate compositions do allow significant cell proliferation and spreading. These bio-nanocomposites have potential for the development of biomedical materials that can control cellular adhesion.

Inhibition of HSP27 phosphorylation by a cell-permeant MAPKAP Kinase 2 inhibitor

Heat shock protein 27 (HSP27) has been implicated in many intracellular signaling processes. Since the phosphorylation of HSP27 can modulate its activity, the ability to inhibit phosphorylation of HSP27 might have clinical relevance especially with regard to the treatment of fibrosis. We have developed a cell-permeant peptide inhibitor of MAPKAP Kinase 2 (MK2), an enzyme that phosphorylates HSP27, by combining a previously described peptide substrate of MK2 with a cell penetrating peptide. This novel MK2 inhibitor (MK2i) reduced HSP27 phosphorylation by MK2 in vitro. At 10 microM, MK2i inhibited TGF-beta1-induced HSP27 phosphorylation in serum-starved human keloid fibroblasts. In addition, 10 microM MK2i decreased TGF-beta1-induced expression of connective tissue growth factor and collagen type I within serum-starved keloid fibroblasts. Thus, MK2i represents a potential therapeutic for the treatment of fibrotic disorders.

Design of a bioactive cell-penetrating peptide: when a transduction domain does more than transduce.

The discovery of cell‐penetrating peptides (CPPs) has facilitated delivery of peptides into cells to affect cellular behavior. Previously, we were successful at developing a phosphopeptide mimetic of the small heat shock‐like protein HSP20 . Building on this success we developed a cell‐permeant peptide inhibitor of mitogen‐activated protein kinase‐activated protein kinase 2 (MK2). It is well documented that inhibition of MK2 may be beneficial for a myriad of human diseases including those involving inflammation and fibrosis. During the optimization of the activity and specificity of the MK2 inhibitor (MK2i) we closely examined the effect of cell‐penetrating peptide identity. Surprisingly, the identity of the CPP dictated kinase specificity and functional activity to an extent that rivaled that of the therapeutic peptide. The results reported herein have wide implications for delivering therapeutics with CPPs and indicate that judicious choice of CPP is crucial to the ultimate therapeutic success. Published in 2009 by John Wiley & Sons, Ltd.

Hemocompatible Poly(NIPAm-MBA-AMPS) Colloidal Nanoparticles as Carriers of Anti-inflammatory Cell Penetrating Peptides

Anionic copolymer systems containing sulfated monomers have great potential for delivery of cationic therapeutics, but N-isopropylacrylamide (NIPAm) 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) copolymer nanoparticles have seen limited characterization to date with regard to physical properties relevant to loading and release of therapeutics. Characterization of polymeric nanoparticles incorporating AMPS showed an increased size and decreased thermodynamic swelling ratios of AMPS containing particles as compared to NIPAm nanoparticles lacking AMPS. Particles with increasing AMPS addition showed an increased propensity for uniformity, intraparticle colloidal stability, and drug loading capacity. Peptide encapsulated in particles was shielded from peptide degradation in serum. Particles were shown not impede blood coagulation or to cause hemolysis. This study has demonstrated that AMPS incorporation into traditional NIPAm nanoparticles presents a tunable parameter for changing particle LCST, size, swelling ratio, ζ potential, and cationic peptide loading potential. This one-pot synthesis results in a thermosensitive anionic nanoparticle system that is a potentially useful platform to deliver cationic cell penetrating peptides.

Cell-penetrating peptides can confer biological function: regulation of inflammatory cytokines in human monocytes by MK2 inhibitor peptides.

Cell-penetrating peptides have been used as a method of delivering biologically active peptide for over two decades. In this paper, we covalently attached four different cell-penetrating peptides to a peptide that inhibits a kinase important in inflammation, mitogen-activated protein kinase activated protein kinase 2 (MAPKAP2 or MK2). We evaluated the specificity, toxicity, and functionality of these therapeutics in an in vitro model of inflammation using THP-1 monocytes. When treated with the MK2 peptide inhibitors, activated THP-1 human monocytes challenged with lipopolysaccharide (LPS) showed a decrease in TNF-α and IL-6 excretion without apparent toxicity. In addition, western blot analysis revealed decreases in the phosphorylation of heat shock protein 27 (HSP27), a downstream substrate of MK2. These results suggested that our peptides inhibited MK2 activity in vitro and should be investigated further as a potential therapeutic for applications involving inflammation. Furthermore, our results suggested that cell-penetrating peptides can be bioactive.

A novel cell permeant peptide inhibitor of MAPKAP kinase II inhibits intimal hyperplasia in a human saphenous vein organ culture model.

OBJECTIVE The present study was aimed at developing a new cell-permeant peptide inhibitor (MK2i) of the kinase that phosphorylates and activates heat-shock protein (HSP)27 (MAPKAP kinase II), and evaluating the ability of this peptide to inhibit HSP27 phosphorylation and intimal thickening. METHODS The ability of MK2i to reduce HSP27 phosphorylation and cell migration was evaluated in A7R5 cells stimulated with arsenite or lysophosphatidic acid. Stable isotopic labeling using amino acids in cell culture, in combination with liquid chromatography mass spectrometry, was used to characterize the effect of MK2i on global protein expression in fibroblasts. The effect of MK2i on intimal thickening and connective tissue growth factor expression was evaluated in human saphenous vein (HSV) rings maintained with 30% fetal bovine serum for 14 days by light microscopy and immunoblotting. RESULTS Pretreatment of cells with MK2i (10 μM) prior to arsenite or lysophosphatidic acid stimulation decreased phosphorylation of HSP27 (36% ± 9% and 33% ± 10%, respectively) compared with control (not pretreated) cells. MK2i also inhibited A7R5 migration, and downregulated the transforming growth factor-induced expression of collagen and fibronectin in keloid cells, two major matrix proteins involved in the development of intimal hyperplasia. Treatment of HSV segments with MK2i enhanced relaxation, reduced HSP27 phosphorylation (40% ± 17%), connective tissue growth factor expression (17% ± 5%), and intimal thickness (48.2% ± 10.5%) compared with untreated segments. On the other hand, treatment with a recombinant fusion protein containing a cell-permeant peptide attached to the HSP27 sequence increased intimal thickness of HSV segments by 48% ± 14%. CONCLUSION Our results suggest that HSP27 may play a role in the development of processes leading to intimal hyperplasia in HSV, and reduction of HSP27 phosphorylation by MK2i may be a potential strategy to inhibit the development of intimal hyperplasia in HSV to prevent the autologous vascular graft failure.

Synthesis and characterization of a poly(lactic-co-glycolic acid) core + poly(N-isopropylacrylamide) shell nanoparticle system

Poly(lactic-co-glycolic acid) (PLGA) is a popular material used to prepare nanoparticles for drug delivery. However, PLGA nanoparticles lack desirable attributes including active targeting abilities, resistance to aggregation during lyophilization, and the ability to respond to dynamic environmental stimuli. To overcome these issues, we fabricated a nanoparticle consisting of a PLGA core encapsulated within a shell of poly(N-isopropylacrylamide). Dynamic light scattering and transmission electron microscope imaging were used to characterize the nanoparticles, while an MTT assay and ELISA suggested biocompatibility in THP1 cells. Finally, a collagen type II binding assay showed successful modification of these nanoparticles with an active targeting moiety.

Method for tracking nanogel particles in vivo and in vitro

Hydrogels made of N‐isopropylacrylamide (NIPA) can be synthesized in the form of highly monodispersed nanoparticles. After synthesis, NIPA hydrogel nanoparticles (nanogels) can be labeled by Alexa Fluor® 488 carboxylic acid, 2,3,5,6‐tetrafluorophenyl ester through amine‐terminated functional groups. This choice of dye is complementary to other biological labeling methods for in vivo studies. When the nanogel/dye nanoparticles are injected into rabbits, they can be imaged via tissue sectioning and confocal microscopy, while nanoparticle concentration can be determined by fluorescent microplate assays. Time‐course persistence of nanoparticles in the circulatory system can be readily tracked by direct assay of plasma and urine samples using 485 nm excitation and 538 emission wavelengths to keep background fluorescence to nearly the same level as that found using an empty well. Depending upon how the nanoparticles are injected, circulatory system concentrations can reach high concentrations and diminish to low levels or gradually increase and gradually decrease over time. Injection in the femoral artery results in a rapid spike in circulating nanogel/dye concentration, while injection into the renal artery results in a more gradual increase.

Biologically-Based Self-Assembling Hydrogels

Abstract : We have developed polymers, which borrowing from biology, assemble into networks. The self-assembly regions of fibrinogen were cloned to form a scaffolding that either interacts with fibrin or assembles independently. Peptides consisting of a binding pocket (BP), ligand (L), and/or a Factor XIIIa substrate were synthesized and conjugated to methacroylated dextran or acrylated poly(ethylene glycol). Peptide-conjugated dextran was added to polymerizing fibrin, and the resulting hydrogels were evaluated rheologically. These conjugates significantly affected the mechanical properties of fibrin while the addition of unconjugated dextran did not. The BP and L peptides were conjugated to PEG star polymer. Mixtures of conjugated PEG-BP and PEG-L were found to assemble. This work shows that peptides directing assembly can be designed using motifs found in proteins. The peptides in this study not only alter the mechanical properties of fibrin, but also allow a mechanism for creating a self-assembling network.