Brandy M. Toner

Characterization of the manganese oxide produced by Pseudomonas putida strain MnB1

Manganese oxides form typically in natural aqueous environments via Mn(II) oxidation catalyzed by microorganisms, primarily bacteria, but little is known about the structure of the incipient solid-phase products. The Mn oxide produced by a Pseudomonas species representative of soils and freshwaters was characterized as to composition, average Mn oxidation number, and N2 specific surface area. Electron microscopy, X-ray diffraction, and X-ray absorption near edge structure spectroscopy were applied to complement the physicochemical data with morphological and structural information. A series of synthetic Mn oxides also was analyzed by the same methods to gain better comparative understanding of the structure of the biogenic oxide. The latter was found to be a poorly crystalline layer type Mn(IV) oxide with hexagonal symmetry, significant negative structural charge arising from cation vacancies, and a relatively small number of randomly stacked octahedral sheets per particle. Its properties were comparable to those of δ-MnO2 (vernadite) and a poorly crystalline hexagonal birnessite (“acid birnessite”) synthesized by reduction of permanganate with HCl, but they were very different from those of crystalline triclinic birnessite. Overall, the structure and composition of the Mn oxide produced by P. putida were similar to what has been reported for other freshly precipitated Mn oxides in natural weathering environments, yielding further support to the predominance of biological oxidation as the pathway for Mn oxide formation. Despite variations in the degree of sheet stacking and Mn(III) content, all poorly crystalline oxides studied showed hexagonal symmetry. Thus, there is a need to distinguish layer type Mn oxides with structures similar to those of natural birnessites from the synthetic triclinic variety. We propose designating the unit cell symmetry as an addition to the current nomenclature for these minerals.

Structural model for the biogenic Mn oxide produced by Pseudomonas putida

Abstract X-ray diffraction (XRD) and Mn K-edge extended X-ray absorption fine structure (EXAFS) spectroscopy were combined to elaborate a structural model for phyllomanganates (layer-type Mn oxides) lacking 3D ordering (turbostratic stacking). These techniques were applied to a sample produced by a common soil and freshwater bacterium (Pseudomonas putida), and to two synthetic analogs, δ-MnO2 and acid birnessite, obtained by the reduction of potassium permanganate with MnCl2 and HCl, respectively. To interpret the diffraction and spectroscopic data, we applied an XRD simulation technique utilized previously for well-crystallized birnessite varieties, complementing this approach with single-scattering-path simulations of the Mn K-edge EXAFS spectra. Our structural analyses revealed that all three Mn oxides have an hexagonal layer symmetry with layers comprising edgesharing Mn4+O6 octahedra and cation vacancies, but no layer Mn3+O6 octahedra. The proportion of cation vacancies in the layers ranged from 6 to 17%, these vacancies being charge-compensated in the interlayer by protons, alkali metals, and Mn atoms, in amounts that vary with the phyllomanganate species and synthesis medium. Both vacancies and interlayer Mn were most abundant in the biogenic oxide. The diffracting crystallites contained three to six randomly stacked layers and have coherent scattering domains of 19.42 Å in the c* direction, and of 60.85 Å in the a-b plane. Thus, the Mn oxides investigated here are nanoparticles that bear significant permanent structural charge resulting from cation layer vacancies and variable surface charge from unsaturated O atoms at layer edges.

Colonization of subsurface microbial observatories deployed in young ocean crust.

Oceanic crust comprises the largest hydrogeologic reservoir on Earth, containing fluids in thermodynamic disequilibrium with the basaltic crust. Little is known about microbial ecosystems that inhabit this vast realm and exploit chemically favorable conditions for metabolic activities. Crustal samples recovered from ocean drilling operations are often compromised for microbiological assays, hampering efforts to resolve the extent and functioning of a subsurface biosphere. We report results from the first in situ experimental observatory systems that have been used to study subseafloor life. Experiments deployed for 4 years in young (3.5 Ma) basaltic crust on the eastern flank of the Juan de Fuca Ridge record a dynamic, post-drilling response of crustal microbial ecosystems to changing physical and chemical conditions. Twisted stalks exhibiting a biogenic iron oxyhydroxide signature coated the surface of mineral substrates in the observatories; these are biosignatures indicating colonization by iron oxidizing bacteria during an initial phase of cool, oxic, iron-rich conditions following observatory installation. Following thermal and chemical recovery to warmer, reducing conditions, the in situ microbial structure in the observatory shifted, becoming representative of natural conditions in regional crustal fluids. Firmicutes, metabolic potential of which is unknown but may involve N or S cycling, dominated the post-rebound bacterial community. The archaeal community exhibited an extremely low diversity. Our experiment documented in situ conditions within a natural hydrological system that can pervade over millennia, exemplifying the power of observatory experiments for exploring the subsurface basaltic biosphere, the largest but most poorly understood biotope on Earth.

Spatially Resolved Characterization of Biogenic Manganese Oxide Production within a Bacterial Biofilm

ABSTRACT Pseudomonas putida strain MnB1, a biofilm-forming bacterial culture, was used as a model for the study of bacterial Mn oxidation in freshwater and soil environments. The oxidation of aqueous Mn+2 [Mn+2(aq)] by P. putida was characterized by spatially and temporally resolving the oxidation state of Mn in the presence of a bacterial biofilm, using scanning transmission X-ray microscopy (STXM) combined with near-edge X-ray absorption fine structure (NEXAFS) spectroscopy at the Mn L2,3 absorption edges. Subsamples were collected from growth flasks containing 0.1 and 1 mM total Mn at 16, 24, 36, and 48 h after inoculation. Immediately after collection, the unprocessed hydrated subsamples were imaged at a 40-nm resolution. Manganese NEXAFS spectra were extracted from X-ray energy sequences of STXM images (stacks) and fit with linear combinations of well-characterized reference spectra to obtain quantitative relative abundances of Mn(II), Mn(III), and Mn(IV). Careful consideration was given to uncertainty in the normalization of the reference spectra, choice of reference compounds, and chemical changes due to radiation damage. The STXM results confirm that Mn+2(aq) was removed from solution by P. putida and was concentrated as Mn(III) and Mn(IV) immediately adjacent to the bacterial cells. The Mn precipitates were completely enveloped by bacterial biofilm material. The distribution of Mn oxidation states was spatially heterogeneous within and between the clusters of bacterial cells. Scanning transmission X-ray microscopy is a promising tool for advancing the study of hydrated interfaces between minerals and bacteria, particularly in cases where the structure of bacterial biofilms needs to be maintained.

Life and Death of Deep-Sea Vents: Bacterial Diversity and Ecosystem Succession on Inactive Hydrothermal Sulfides

ABSTRACT Hydrothermal chimneys are a globally dispersed habitat on the seafloor associated with mid-ocean ridge (MOR) spreading centers. Active, hot, venting sulfide structures from MORs have been examined for microbial diversity and ecology since their discovery in the mid-1970s, and recent work has also begun to explore the microbiology of inactive sulfides—structures that persist for decades to millennia and form moderate to massive deposits at and below the seafloor. Here we used tag pyrosequencing of the V6 region of the 16S rRNA and full-length 16S rRNA sequencing on inactive hydrothermal sulfide chimney samples from 9°N on the East Pacific Rise to learn their bacterial composition, metabolic potential, and succession from venting to nonventing (inactive) regimes. Alpha-, beta-, delta-, and gammaproteobacteria and members of the phylum Bacteroidetes dominate all inactive sulfides. Greater than 26% of the V6 tags obtained are closely related to lineages involved in sulfur, nitrogen, iron, and methane cycling. Epsilonproteobacteria represent <4% of the V6 tags recovered from inactive sulfides and 15% of the full-length clones, despite their high abundance in active chimneys. Members of the phylum Aquificae, which are common in active vents, were absent from both the V6 tags and full-length 16S rRNA data sets. In both analyses, the proportions of alphaproteobacteria, betaproteobacteria, and members of the phylum Bacteroidetes were greater than those found on active hydrothermal sulfides. These shifts in bacterial population structure on inactive chimneys reveal ecological succession following cessation of venting and also imply a potential shift in microbial activity and metabolic guilds on hydrothermal sulfides, the dominant biome that results from seafloor venting. IMPORTANCE Hydrothermal chimneys are globally dispersed seafloor habitats associated with mid-ocean ridge spreading centers. Active, hot, venting chimneys have been examined for microbial ecology since their discovery in the late 1970s, but the microbiology of inactive chimneys, which may persist for thousands of years, has only recently been explored. We studied bacterial diversity on inactive hydrothermal sulfide chimney samples from 9°N on the East Pacific Rise to learn their bacterial community composition, potential ecological roles, and succession from active venting to inactive chimneys. Many bacteria on inactive sulfide chimneys are closely related to lineages involved in sulfur, nitrogen, iron, and methane cycling, and two common groups found on active chimneys are nearly absent from inactive vents, where they were replaced by groups likely involved in the elemental cycling mentioned above. Our findings reveal that ecological succession occurs on hydrothermal sulfides after active venting ceases and also imply a potential shift in microbial metabolic guilds. Hydrothermal chimneys are globally dispersed seafloor habitats associated with mid-ocean ridge spreading centers. Active, hot, venting chimneys have been examined for microbial ecology since their discovery in the late 1970s, but the microbiology of inactive chimneys, which may persist for thousands of years, has only recently been explored. We studied bacterial diversity on inactive hydrothermal sulfide chimney samples from 9°N on the East Pacific Rise to learn their bacterial community composition, potential ecological roles, and succession from active venting to inactive chimneys. Many bacteria on inactive sulfide chimneys are closely related to lineages involved in sulfur, nitrogen, iron, and methane cycling, and two common groups found on active chimneys are nearly absent from inactive vents, where they were replaced by groups likely involved in the elemental cycling mentioned above. Our findings reveal that ecological succession occurs on hydrothermal sulfides after active venting ceases and also imply a potential shift in microbial metabolic guilds.

Sulfur oxidation genes in diverse deep-sea viruses.

Virus-Enhanced Sulfur Oxidation How do microbial viruses affect subsurface microbial communities? Anantharaman et al. (p. 757, published online 1 May) investigated the interactions between ubiquitous marine lithotrophs found at hydrothermal vents and their viruses. The genes for sulfur oxidation in viruses that infect abundant marine chemosynthetic sulfur-oxidizing bacteria enhanced sulfur oxidation, thereby influencing the biogeochemical sulfur cycle. Host-derived viral auxiliary metabolic genes for sulfur oxidation play a key biogeochemical role in the dark ocean. Viruses are the most abundant biological entities in the oceans and a pervasive cause of mortality of microorganisms that drive biogeochemical cycles. Although the ecological and evolutionary effects of viruses on marine phototrophs are well recognized, little is known about their impact on ubiquitous marine lithotrophs. Here, we report 18 genome sequences of double-stranded DNA viruses that putatively infect widespread sulfur-oxidizing bacteria. Fifteen of these viral genomes contain auxiliary metabolic genes for the α and γ subunits of reverse dissimilatory sulfite reductase (rdsr). This enzyme oxidizes elemental sulfur, which is abundant in the hydrothermal plumes studied here. Our findings implicate viruses as a key agent in the sulfur cycle and as a reservoir of genetic diversity for bacterial enzymes that underpin chemosynthesis in the deep oceans.

Ultra-diffuse hydrothermal venting supports Fe-oxidizing bacteria and massive umber deposition at 5000 m off Hawaii

A novel hydrothermal field has been discovered at the base of Lōihi Seamount, Hawaii, at 5000 mbsl. Geochemical analyses demonstrate that ‘FeMO Deep’, while only 0.2 °C above ambient seawater temperature, derives from a distal, ultra-diffuse hydrothermal source. FeMO Deep is expressed as regional seafloor seepage of gelatinous iron- and silica-rich deposits, pooling between and over basalt pillows, in places over a meter thick. The system is capped by mm to cm thick hydrothermally derived iron-oxyhydroxide- and manganese-oxide-layered crusts. We use molecular analyses (16S rDNA-based) of extant communities combined with fluorescent in situ hybridizations to demonstrate that FeMO Deep deposits contain living iron-oxidizing Zetaproteobacteria related to the recently isolated strain Mariprofundus ferroxydans. Bioenergetic calculations, based on in-situ electrochemical measurements and cell counts, indicate that reactions between iron and oxygen are important in supporting chemosynthesis in the mats, which we infer forms a trophic base of the mat ecosystem. We suggest that the biogenic FeMO Deep hydrothermal deposit represents a modern analog for one class of geological iron deposits known as ‘umbers’ (for example, Troodos ophilolites, Cyprus) because of striking similarities in size, setting and internal structures.

Mineralogy of Iron Microbial Mats from Loihi Seamount

Extensive mats of Fe oxyhydroxides and associated Fe-oxidizing microbial organisms form in diverse geochemical settings – freshwater seeps to deep-sea vents – where ever opposing Fe(II)-oxygen gradients prevail. The mineralogy, reactivity, and structural transformations of Fe oxyhydroxides precipitated from submarine hydrothermal fluids within microbial mats remains elusive in active and fossil systems. In response, a study of Fe microbial mat formation at the Loihi Seamount was conducted to describe the physical and chemical characteristics of Fe-phases using extended X-ray absorption fine structure spectroscopy, powder X-ray diffraction, synchrotron radiation X-ray total scattering, low-temperature magnetic measurements, and Mössbauer spectroscopy. Particle sizes of 3.5–4.6 nm were estimated from magnetism data, and coherent scattering domain (CSD) sizes as small as 1.6 nm are indicated by pair distribution function (PDF) analysis. Disorder in the nanostructured Fe-bearing phases results in limited intermediate-range structural order: less than that of standard two-line ferrihydrite (Fh), except for the Pohaku site. The short-range ordered natural Fh (FhSRO) phases were stable at 4°C in the presence of oxygen for at least 1 year and during 400°C treatment. The observed stability of the FhSRO is consistent with magnetic observations that point to non-interacting nanoparticles. PDF analyses of total scattering data provide further evidence for FhSRO particles with a poorly ordered silica coating. The presence of coated particles explains the small CSD for the mat minerals, as well as the stability of the minerals over time and against heating. The mineral properties observed here provide a starting point from which progressively older and more extensively altered Fe deposits may be examined, with the ultimate goal of improved interpretation of past biogeochemical conditions and diagenetic processes.

Chemical speciation of vanadium in particulate matter emitted from diesel vehicles and urban atmospheric aerosols.

We report on the development and application of an integrated set of analytical tools that enable accurate measurement of total, extractable, and, importantly, the oxidation state of vanadium in sub-milligram masses of environmental aerosols and solids. Through rigorous control of blanks, application of magnetic-sector-ICPMS, and miniaturization of the extraction/separation methods we have substantially improved upon published quantification limits. The study focused on the application of these methods to particulate matter (PM) emissions from diesel vehicles, both in baseline configuration without after-treatment and also equipped with advanced PM and NO(x) emission controls. Particle size-resolved vanadium speciation data were obtained from dynamometer samples containing total vanadium pools of only 0.2-2 ng and provide some of the first measurements of the oxidation state of vanadium in diesel vehicle PM emissions. The emission rates and the measured fraction of V(V) in PM from diesel engines running without exhaust after-treatment were both low (2-3 ng/mile and 13-16%, respectively). The V(IV) species was measured as the dominant vanadium species in diesel PM emissions. A significantly greater fraction of V(V) (76%) was measured in PM from the engine fitted with a prototype vanadium-based selective catalytic reductors (V-SCR) retrofit. The emission rate of V(V) determined for the V-SCR equipped vehicle (103 ng/mile) was 40-fold greater than that from the baseline vehicle. A clear contrast between the PM size-distributions of V(V) and V(IV) emissions was apparent, with the V(V) distribution characterized by a major single mode in the ultrafine (<0.25 μm) size range and the V(IV) size distribution either flat or with a small maxima in the accumulation mode (0.5-2 μm). The V(V) content of the V-SCR PM (6.6 μg/g) was 400-fold greater than that in PM from baseline (0.016 μg/g) vehicles, and among the highest of all environmental samples examined. Synchrotron based V 1s XANES spectroscopy of vanadium-containing fine-particle PM from the V-SCR identified V(2)O(5) as the dominant vanadium species.

Microscale Characterization of Sulfur Speciation in Lake Sediments

Prairie pothole lakes (PPLs) are naturally sulfur-enriched wetlands in the glaciated prairie region of North America. High sulfate levels and dynamic hydrogeochemistry in combination render PPLs a unique environment to explore the speciation of sedimentary sulfur (S). The goals of this research were to define and quantify the solid-phase S pools in PPL sediments and track seasonal dynamics of S speciation. A quantitative X-ray microprobe method was developed based on S 1s X-ray absorption near-edge structure (XANES) spectroscopy and multienergy X-ray fluorescence mapping. Three S pools-pyritic S, reduced organic S (organic mono- and disulfide), and oxidized S (inorganic sulfate, ester sulfate, and sulfonate)-were identified in PPL sediments. No significant seasonal variation was evident for total S, but S speciation showed a seasonal response. During the spring-summer transition, the reduced organic S decreased from 55 to 15 mol %, with a concomitant rise in the oxidized S. During the summer-fall transition, the trend reversed and the reduced organic S grew to 75 mol % at the expense of the oxidized S. The pyritic S, on the other hand, remained relatively constant (∼22 mol %) over time. The seasonal changes in S speciation have strong potential to force the cycling of elements such as mercury in prairie wetlands.