Brian Courtney

Hybrid intravascular imaging: recent advances, technical considerations, and current applications in the study of plaque pathophysiology

Cumulative evidence from histology-based studies demonstrate that the currently available intravascular imaging techniques have fundamental limitations that do not allow complete and detailed evaluation of plaque morphology and pathobiology, limiting the ability to accurately identify high-risk plaques. To overcome these drawbacks, new efforts are developing for data fusion methodologies and the design of hybrid, dual-probe catheters to enable accurate assessment of plaque characteristics, and reliable identification of high-risk lesions. Today several dual-probe catheters have been introduced including combined near infrared spectroscopy-intravascular ultrasound (NIRS-IVUS), that is already commercially available, IVUS-optical coherence tomography (OCT), the OCT-NIRS, the OCT-near infrared fluorescence (NIRF) molecular imaging, IVUS-NIRF, IVUS intravascular photoacoustic imaging and combined fluorescence lifetime-IVUS imaging. These multimodal approaches appear able to overcome limitations of standalone imaging and provide comprehensive visualization of plaque composition and plaque biology. The aim of this review article is to summarize the advances in hybrid intravascular imaging, discuss the technical challenges that should be addressed in order to have a use in the clinical arena, and present the evidence from their first applications aiming to highlight their potential value in the study of atherosclerosis.

Hybrid intravascular ultrasound and optical coherence tomography catheter for imaging of coronary atherosclerosis.

To demonstrate the feasibility of imaging human coronary atherosclerosis using a novel hybrid intravascular ultrasound (IVUS) and optical coherence tomography (OCT) imaging catheter.

Innovations in imaging for chronic total occlusions: a glimpse into the future of angiography’s blind-spot

Chronic total occlusions (CTOs) are a subset of lesions that present a considerable burden to cardiovascular patients. There exists a strong clinical desire to improve non-surgical options for CTO revascularization. While several techniques, devices, and guide wires have been developed and refined for use in CTOs, the inability of angiography to adequately visualize occluded arterial segments makes interventions in this setting technically challenging. This review describes the current status of several invasive and non-invasive imaging techniques that may facilitate improved image guidance during CTO revascularization, with the goals of improving procedure safety and efficacy while reducing the time required to complete these interventions. Cardiac imaging also has important potential roles in selecting patients most likely to benefit from revascularization as well as pre-procedural planning, post-procedural assessment of revascularized segments and long-term outcomes studies. Modalities discussed include non-invasive techniques, such as CT(computed tomography) angiography and cardiac magnetic resonance imaging (MRI), as well as invasive techniques, such as intravascular ultrasound, optical coherence tomography, intravascular MRI, and conventional angiography. While some of these techniques have some evidence to support their use at present, others are at earlier stages of development. Strategies that combine imaging techniques with the use of interventional therapies may provide significant opportunities to improve results in CTO interventions and represent an active area of investigation.

Electrostatic forward-viewing scanning probe for Doppler optical coherence tomography using a dissipative polymer catheter

A novel flexible scanning optical probe is constructed with a finely etched optical fiber strung through a platinum coil in the lumen of a dissipative polymer. The packaged probe is 2.2 mm in diameter with a rigid length of 6mm when using a ball lens or 12 mm when scanning the fiber proximal to a gradient-index (GRIN) lens. Driven by constant high voltage (1-3 kV) at low current (< 5 microA), the probe oscillates to provide wide forward-viewing angle (13 degrees and 33 degrees with ball and GRIN lens designs, respectively) and high-frame-rate (10-140 fps) operation. Motion of the probe tip is observed with a high-speed camera and compared with theory. Optical coherence tomography (OCT) imaging with the probe is demonstrated with a wavelength-swept source laser. Images of an IR card as well as in vivo Doppler OCT images of a tadpole heart are presented. This optomechanical design offers a simple, inexpensive method to obtain a high-frame-rate forward-viewing scanning probe.

In vivo feasibility of endovascular Doppler optical coherence tomography

Feasibility of detecting intravascular flow using a catheter based endovascular optical coherence tomography (OCT) system is demonstrated in a porcine carotid model in vivo. The effects of A-line density, radial distance, signal-to-noise ratio, non-uniform rotational distortion (NURD), phase stability of the swept wavelength laser and interferometer system on Doppler shift detection limit were investigated in stationary and flow phantoms. Techniques for NURD induced phase shift artifact removal were developed by tracking the catheter sheath. Detection of high flow velocity (~51 cm/s) present in the porcine carotid artery was obtained by phase unwrapping techniques and compared to numerical simulation, taking into consideration flow profile distortion by the eccentrically positioned imaging catheter. Using diluted blood in saline mixture as clearing agent, simultaneous Doppler OCT imaging of intravascular flow and structural OCT imaging of the carotid artery wall was feasible. To our knowledge, this is the first in vivo demonstration of Doppler imaging and absolute measurement of intravascular flow using a rotating fiber catheter in carotid artery.

Doppler optical coherence tomography for interventional cardiovascular guidance: in vivo feasibility and forward-viewing probe flow phantom demonstration

We demonstrate the potential of a forward-looking Doppler optical coherence tomography (OCT) probe for color flow imaging in several commonly seen narrowed artery morphologies. As a proof of concept, we present imaging results of a surgically exposed thrombotic occlusion model that was imaged superficially to demonstrate that Doppler OCT can identify flow within the recanalization channels of a blocked artery. We present Doppler OCT images in which the flow is nearly antiparallel to the imaging direction. These images are acquired using a flexible 2.2-mm-diam catheter that used electrostatic actuation to scan up to 30 deg ahead of the distal end. Doppler OCT images of physiologically relevant flow phantoms consisting of small channels and tapered entrance geometries are demonstrated.

Comprehensive data visualization for high resolution endovascular carotid arterial wall imaging

Carotid angioplasty and stenting is a minimally invasive endovascular procedure that may benefit from in vivo high resolution imaging for monitoring the physical placement of the stent and potential complications. The purpose of this pilot study was to evaluate the ability of optical coherence tomography to construct high resolution 2D and 3D images of stenting in porcine carotid artery. Four Yorkshire pigs were anaesthetized and catheterized. A state-of-the-art optical coherence tomography (OCT) system and an automated injector were used to obtain both healthy and stented porcine carotid artery images. Data obtained were then processed for visualization. The state-of-the-art OCT system was able to capture high resolution images of both healthy and stented carotid arteries. High quality 3D images of healthy and stented carotid arteries were constructed, clearly depicting vessel wall morphological features, stent apposition and thrombus formation over the inserted stent. The results demonstrate that OCT can be used to generate high quality 3D images of carotid arterial stents for accurate diagnosis of stent apposition and complications under appropriate imaging conditions.

Feasibility of endovascular optical coherence tomography for high-resolution carotid vessel wall imaging

Carotid Artery Stenting (CAS) is a procedure that treats carotid atherosclerosis which should be monitored by in vivo high resolution imaging for the quality of the procedure and potential complications. The purpose of this pilot study is to evaluate the ability of optical coherence tomography to construct high resolution two and three dimensional images of stenting in porcine carotid artery for high accuracy diagnostic purposes. Four Yorkshire pigs were anaesthetized and catheterized. A state-of-the-art optical coherence tomography (OCT) system (Lightlab Imaging, St. Jude Medical Inc.) and an automated injector were used to obtain both healthy and stented porcine carotid artery images. Data obtained were then processed for visualization. The state-of-the-art OCT system was able to capture high resolution images of both healthy and stented carotid arteries. High quality three dimensional images of stented carotid arteries were constructed, clearly depicting stent apposition and thrombus formation over different stents. The results demonstrated that current state-of-the-art OCT system can be used to generate high quality three dimensional images of carotid arterial stents for accurate diagnosis of stent apposition and complications under appropriate imaging conditions.

Characterization of an intraluminal differential frequency-domain photoacoustics system

Cardiovascular related diseases are ranked as the second highest cause of death in Canada. Among the most important cardiovascular diseases is atherosclerosis. Current methods of diagnosis of atherosclerosis consist of angiography, intravascular ultrasound (IVUS) and optical coherence tomography (OCT). None of these methods possesses adequate sensitivity, as the ideal technique should be capable of both depth profiling, as well as functional imaging. An alternative technique is photoacoustics (PA) which can perform deep imaging and spectroscopy. The presented study explores the application of wavelength-modulated differential photoacoustic radar (WM-DPAR) for characterizing arterial vessels. The wavelength-modulated differential photoacoustic technique was shown to be able to substantially increase the dynamic range and sensitivity of hemoglobin oxygenation level detection. In this work the differential PA technique was used with a very high frequency modulation range. To perform spectroscopic PA imaging, at least two wavelengths are required. The selected wavelengths for this work are 1210 nm and 980 nm. 1210 nm corresponds to the maximum optical absorption coefficient of cholesterol and cholesteryl esters which are the main constituents of plaques. Since water, elastin and collagen also have high absorption coefficients at 1210 nm, this wavelength alone cannot provide very high sensitivity and specificity. The additional wavelength, 980 nm corresponds to high absorption coefficient of those constituents of healthy artery tissue. The simultaneous application of the abovementioned wavelengths can provide higher sensitivity and improved specificity in detecting lipids in the arterial vessels.

TCT-569 Validation of Novel Combined IVUS/OCT Catheter using Ex-Vivo Samples: Qualitative Examination of Human Cadaver Specimens

METHODS A custom-built, rotational, 3-French, hybrid IVUS-OCT imaging catheter was used for image acquisition. A 40 MHz ultrasound transducer located at the tip of the catheter contained an embedded OCT fiber optic cable in order to generate coincident imaging beams. The catheter is capable of obtaining simultaneous coregistered IVUS-OCT images in a single pullback. Human cadaver specimens of major epicardial coronary vessels were obtained from the UHN pathology laboratory. Pathology slides were prepared with hemotoxylin/eosin (H&E) staining.