Brian J. Walker

Singlet exciton fission in solution.

Singlet exciton fission, the spin-conserving process that produces two triplet excited states from one photoexcited singlet state, is a means to circumvent the Shockley-Queisser limit in single-junction solar cells. Although the process through which singlet fission occurs is not well characterized, some local order is thought to be necessary for intermolecular coupling. Here, we report a triplet yield of 200% and triplet formation rates approaching the diffusion limit in solutions of bis(triisopropylsilylethynyl (TIPS)) pentacene. We observe a transient bound excimer intermediate, formed by the collision of one photoexcited and one ground-state TIPS-pentacene molecule. The intermediate breaks up when the two triplets separate to each TIPS-pentacene molecule. This efficient system is a model for future singlet-fission materials and for disordered device components that produce cascades of excited states from sunlight.

In situ measurement of exciton energy in hybrid singlet-fission solar cells

Singlet exciton fission-sensitized solar cells have the potential to exceed the Shockley-Queisser limit by generating additional photocurrent from high-energy photons. Pentacene is an organic semiconductor that undergoes efficient singlet fission--the conversion of singlet excitons into pairs of triplets. However, the pentacene triplet is non-emissive, and uncertainty regarding its energy has hindered device design. Here we present an in situ measurement of the pentacene triplet energy by fabricating a series of bilayer solar cells with infrared-absorbing nanocrystals of varying bandgaps. We show that the pentacene triplet energy is at least 0.85 eV and at most 1.00 eV in operating devices. Our devices generate photocurrent from triplets, and achieve external quantum efficiencies up to 80%, and power conversion efficiencies of 4.7%. This establishes the general use of nanocrystal size series to measure the energy of non-emissive excited states, and suggests that fission-sensitized solar cells are a favourable candidate for third-generation photovoltaics.

Mechanistic insights into the formation of InP quantum dots.

This paper examines the molecular mechanism of InP colloidal quantum dot (QD) syntheses. Unlike methods for monodisperse PbSe and CdSe we found that existing InP syntheses result in total depletion of molecular phosphorous species following nucleation, so QD growth is due exclusively to non-molecular ripening. We find that amines inhibit precursor depletion via solvation, and these findings may lead to better synthetic methodology for InP QDs.

Resonant energy transfer of triplet excitons from pentacene to PbSe nanocrystals

The efficient transfer of energy between organic and inorganic semiconductors is a widely sought after property, but has so far been limited to the transfer of spin-singlet excitons. Here we report efficient resonant-energy transfer of molecular spin-triplet excitons from organic semiconductors to inorganic semiconductors. We use ultrafast optical absorption spectroscopy to track the dynamics of triplets, generated in pentacene through singlet exciton fission, at the interface with lead selenide (PbSe) nanocrystals. We show that triplets transfer to PbSe rapidly (<1 ps) and efficiently, with 1.9 triplets transferred for every photon absorbed in pentacene, but only when the bandgap of the nanocrystals is close to resonance (±0.2 eV) with the triplet energy. Following triplet transfer, the excitation can undergo either charge separation, allowing photovoltaic operation, or radiative recombination in the nanocrystal, enabling luminescent harvesting of triplet exciton energy in light-emitting structures.

Preventing Interfacial Recombination in Colloidal Quantum Dot Solar Cells by Doping the Metal Oxide

Recent research has pushed the efficiency of colloidal quantum dot solar cells toward a level that spurs commercial interest. Quantum dot/metal oxide bilayers form the most efficient colloidal quantum dot solar cells, and most studies have advanced the understanding of the quantum dot component. We study the interfacial recombination process in depleted heterojunction colloidal quantum dot (QD) solar cells formed with ZnO as the oxide by varying (i) the carrier concentration of the ZnO layer and (ii) the density of intragap recombination sites in the QD layer. We find that the open-circuit voltage and efficiency of PbS QD/ZnO devices can be improved by 50% upon doping of the ZnO with nitrogen to reduce its carrier concentration. In contrast, doping the ZnO did not change the performance of PbSe QD/ZnO solar cells. We use X-ray photoemission spectroscopy, ultraviolet photoemission spectroscopy, transient photovoltage decay measurements, transient absorption spectroscopy, and intensity-dependent photocurrent measurements to investigate the origin of this effect. We find a significant density of intragap states within the band gap of the PbS quantum dots. These states facilitate recombination at the PbS/ZnO interface, which can be suppressed by reducing the density of occupied states in the ZnO. For the PbSe QD/ZnO solar cells, where fewer intragap states are observed in the quantum dots, the interfacial recombination channel does not limit device performance. Our study sheds light on the mechanisms of interfacial recombination in colloidal quantum dot solar cells and emphasizes the influence of quantum dot intragap states and metal oxide properties on this loss pathway.

Alternating layer addition approach to CdSe/CdS core/shell quantum dots with near-unity quantum yield and high on-time fractions

We report single-particle photoluminescence (PL) intermittency (blinking) with high on-time fractions in colloidal CdSe quantum dots (QD) with conformal CdS shells of 1.4 nm thickness, equivalent to approximately 4 CdS monolayers. All QDs observed displayed on-time fractions > 60% with the majority > 80%. The high-on-time-fraction blinking is accompanied by fluorescence quantum yields (QY) close to unity (up to 98% in an absolute QY measurement) when dispersed in organic solvents and a monoexponential ensemble photoluminescence (PL) decay lifetime. The CdS shell is formed in high synthetic yield using a modified selective ion layer adsorption and reaction (SILAR) technique that employs a silylated sulfur precursor. The CdS shell provides sufficient chemical and electronic passivation of the QD excited state to permit water solubilization with greater than 60% QY via ligand exchange with an imidazole-bearing hydrophilic polymer.

Synthesis of Cadmium Arsenide Quantum Dots Luminescent in the Infrared

We present the synthesis of Cd(3)As(2) colloidal quantum dots luminescent from 530 to 2000 nm. Previous reports on quantum dots emitting in the infrared are primarily limited to the lead chalcogenides and indium arsenide. This work expands the availability of high quality infrared emitters.

Identification of a triplet pair intermediate in singlet exciton fission in solution

Significance We use transient spectroscopy to investigate the mechanism of singlet exciton fission, a quantum mechanical phenomenon in some organic molecules in which a spin-singlet excited state can split into two spin-triplet states. This process may be harnessed to boost solar cell efficiencies, but the underlying mechanism remains poorly understood. Central to most models is a triplet pair state, consisting of two triplets entangled into an overall spin-singlet configuration, but it has never before been optically detected. In a solution-based system, we detect a state with simultaneous singlet and triplet exciton character that dissociates to form triplet excitons in 120% yield. We consider that this intermediate constitutes a triplet pair state, and its observation allows important insight into the nature of triplet exciton coupling. Singlet exciton fission is the spin-conserving transformation of one spin-singlet exciton into two spin-triplet excitons. This exciton multiplication mechanism offers an attractive route to solar cells that circumvent the single-junction Shockley–Queisser limit. Most theoretical descriptions of singlet fission invoke an intermediate state of a pair of spin-triplet excitons coupled into an overall spin-singlet configuration, but such a state has never been optically observed. In solution, we show that the dynamics of fission are diffusion limited and enable the isolation of an intermediate species. In concentrated solutions of bis(triisopropylsilylethynyl)[TIPS]—tetracene we find rapid (<100 ps) formation of excimers and a slower (∼10 ns) break up of the excimer to two triplet exciton-bearing free molecules. These excimers are spectroscopically distinct from singlet and triplet excitons, yet possess both singlet and triplet characteristics, enabling identification as a triplet pair state. We find that this triplet pair state is significantly stabilized relative to free triplet excitons, and that it plays a critical role in the efficient endothermic singlet fission process.

Quantum Dot/J-Aggregate Blended Films for Light Harvesting and Energy Transfer

This paper describes the solution preparation of thin films composed of quantum dots and thiacyanine J-aggregates, making use of the size tunable emission of quantum dots and the narrow, intense absorption of J-aggregates in the solid state. These blended films exhibit 90% energy transfer efficiency from J-aggregates to quantum dots and can uniformly cover a large area. Because the presence of the J-aggregates enhances the QD photoluminescence intensity by 2.5-fold over QDs alone, these solid state materials may be useful in downconversion applications or in fundamental investigations of light harvesting.

Color-Selective Photocurrent Enhancement in Coupled J-Aggregate/Nanowires Formed in Solution

J-aggregates are ordered clusters of coherently coupled molecular dyes, (1) and they have been used as light sensitizers in film photography due to their intense absorptions. Hybrid structures containing J-aggregates may also have applications in devices that require spectral specificity, such as color imaging or optical signaling. (2) However the use of J-aggregates in optoelectronic devices has posed a long-standing challenge (3, 4) due to the difficulty of controlling aggregate formation and the low charge carrier mobility of many J-aggregates in solid state. In this paper, we demonstrate a modular method to assemble three different cyanine J-aggregates onto CdSe nanowires, resulting in a photodetector that is color-sensitized in three specific, narrow absorption bands. Both the J-aggregate and nanowire device components are fabricated from solution and the sensitizing wavelength is switched from blue to red to green, using only solution-phase exchange of the J-aggregates on the same underlying device.