Brigitte Tiersch

Two-step inflation of cellular polypropylene films: void-thickness increase and enhanced electromechanical properties

In cellular, electromechanically active polymer films, the so-called ferroelectrets, the cell size and shape distributions can be varied through a controlled inflation process. Up to now, high-pressure treatments were usually performed at elevated temperatures. There are, however, significant experimental limitations and complications if the pressure and temperature treatments are performed at the same time. Here, we demonstrate the controlled inflation of cellular polypropylene films by means of separate pressure and temperature treatments. Separate procedures are much easier to implement. Excellent electromechanical properties were achieved with such a two-step inflation process. The technique has significant potential for inflating large-area transducer films for electromechanical and electroacoustical applications.

Encapsulation of proteins in hydrogel carrier systems for controlled drug delivery influence of network structure and drug size on release rate

Novel hydrogels based on hydroxyethyl starch modified with polyethylene glycol methacrylate (HES-P(EG)₆MA) were developed as delivery system for the controlled release of proteins. Since the drug release behavior is supposed to be related to the pore structure of the hydrogel network the pore sizes were determined by cryo-SEM, which is a mild technique for imaging on a nanometer scale. The results showed a decreasing pore size and an increase in pore homogeneity with increasing polymer concentration. Furthermore, the mesh sizes of the hydrogels were calculated based on swelling data. Pore and mesh size were significantly different which indicates that both structures are present in the hydrogel. The resulting structural model was correlated with release data for bulk hydrogel cylinders loaded with FITC-dextran and hydrogel microspheres loaded with FITC-IgG and FITC-dextran of different molecular size. The initial release depended much on the relation between hydrodynamic diameter and pore size while the long term release of the incorporated substances was predominantly controlled by degradation of the network of the much smaller meshes.

Poly(ethylene imine)-controlled calcium phosphate mineralization

The current paper shows that poly(ethylene imine) (PEI) is an efficient template for the fabrication of spherical calcium phosphate (CaP)/polymer hybrid particles at pH values above 8. The polymer forms spherical entities, which contain one or a few CaP particles with diameters of ca. 6 nm. The samples contain up to 20 wt % polymer, which appears to be wrapped around the small CaP particles. The particles form via a mineralization-trapping pathway, where at the beginning of the precipitation small CaP particles form. Further particle growth is then prevented by precipitation of the PEI onto these particles at pH values of ca. 8. Stabilization of the particles is provided by the re-protonation of the PEI, which is adsorbed on the CaP particles, during the remainder of the mineralization process. At low pH, much larger particles form. They most likely grow via heterogeneous nucleation and growth on existing, polymer-modified CaP surfaces.

Human sulfite oxidase electrochemistry on gold nanoparticles modified electrode

The present study reports a facile approach for sulfite biosensing, based on enhanced direct electron transfer of a human sulfite oxidase (hSO) immobilized on a gold nanoparticles modified electrode. The spherical core shell AuNPs were prepared via a new method by reduction of HAuCl(4) with branched poly(ethyleneimine) in an ionic liquids resulting particles with a diameter less than 10nm. These nanoparticles were covalently attached to a mercaptoundecanoic acid modified Au-electrode where then hSO was adsorbed and an enhanced interfacial electron transfer and electrocatalysis was achieved. UV/Vis and resonance Raman spectroscopy, in combination with direct protein voltammetry, are employed for the characterization of the system and reveal no perturbation of the structural integrity of the redox protein. The proposed biosensor exhibited a quick steady-state current response, within 2 s, a linear detection range between 0.5 and 5.4 μM with a high sensitivity (1.85 nA μM(-1)). The investigated system provides remarkable advantages in the possibility to work at low applied potential and at very high ionic strength. Therefore these properties could make the proposed system useful in the development of bioelectronic devices and its application in real samples.

Structural studies of ionic liquid-modified microemulsions

This work is focused on the influence of an ionic liquid (IL), i.e. ethyl-methylimidazolium hexylsulfate, on the spontaneous formation of microemulsions with ionic surfactants. The influence of the ionic liquid on structure formation in the optically clear phase region in water/toluene/pentanol mixtures in presence of the cationic surfactant CTAB was studied in more detail. The results show a significant increase of the transparent phase region by adding the ionic liquid. Conductometric investigations demonstrate that adding the ionic liquid can drastically reduce the droplet-droplet interactions in the L(2) phase. (1)H nuclear magnetic resonance ((1)H NMR) diffusion coefficient measurements in combination with dynamic light scattering measurements clearly show that inverse microemulsion droplets still exist, but the droplet size is decreased to 2 nm. A more detailed characterisation of the isotropic phase channel by means of conductivity measurements, dynamic light scattering (DLS), (1)H NMR and cryo-scanning electron microscopy (SEM), allows the identification of a bicontinuous sponge phase between the L(1) and L(2) phase. When the poly(ethyleneimine) is added, the isotropic phase range is reduced drastically, but the inverse microemulsion range still exists.

Nonaqueous Microemulsions Based on N,N′-Alkylimidazolium Alkylsulfate Ionic Liquids

The ternary system composed of the ionic liquid surfactant (IL-S) 1-butyl-3-methylimidazolium dodecylsulfate ([Bmim][DodSO4]), the room temperature ionic liquid (RTIL) 1-ethyl-3-methylimidazolium ethylsulfate ([Emim][EtSO4]), and toluene has been investigated. Three major mechanisms guiding the structure of the isotropic phase were identified by means of conductometric experiments, which have been correlated to the presence of oil-in-IL, bicontinuous, and IL-in-oil microemulsions. IL-S forms micelles in toluene, which swell by adding RTIL as to be shown by dynamic light scattering (DLS) and small-angle X-ray scattering (SAXS) experiments. Therefore, it is possible to form water-free IL-in-oil reverse microemulsions ≤10 nm in size as a new type of nanoreactor.

Nanoparticle Modification by Weak Polyelectrolytes for pH-Sensitive Pickering Emulsions

The affinity of weak polyelectrolyte coated oxide particles to the oil-water interface can be controlled by the degree of dissociation and the thickness of the weak polyelectrolyte layer. Thereby the oil in water (o/w) emulsification ability of the particles can be enabled. We selected the weak polyacid poly(methacrylic acid sodium salt) and the weak polybase poly(allylamine hydrochloride) for the surface modification of oppositely charged alumina and silica colloids, respectively. The isoelectric point and the pH range of colloidal stability of both particle-polyelectrolyte composites depend on the thickness of the weak polyelectrolyte layer. The pH-dependent wettability of a weak polyelectrolyte-coated oxide surface is characterized by contact angle measurements. The o/w emulsification properties of both particles for the nonpolar oil dodecane and the more polar oil diethylphthalate are investigated by measurements of the droplet size distributions. Highly stable emulsions can be obtained when the degree of dissociation of the weak polyelectrolyte is below 80%. Here the average droplet size depends on the degree of dissociation, and a minimum can be found when 15 to 45% of the monomer units are dissociated. The thickness of the adsorbed polyelectrolyte layer strongly influences the droplet size of dodecane/water emulsion droplets but has a less pronounced impact on the diethylphthalate/water droplets. We explain the dependency of the droplet size on the emulsion pH value and the polyelectrolyte coating thickness with arguments based on the particle-wetting properties, the particle aggregation state, and the oil phase polarity. Cryo-SEM visualization shows that the regularity of the densely packed particles on the oil-water interface correlates with the degree of dissociation of the corresponding polyelectrolyte.

Structure of biodiesel based bicontinuous microemulsions for environmentally compatible decontamination: A small angle neutron scattering and freeze fracture electron microscopy study

Most toxic industrial chemicals and chemical warfare agents are hydrophobic and can only be solubilized in organic solvents. However, most reagents employed for the degradation of these toxic compounds can only be dissolved in water. Hence, microemulsions are auspicious media for the decontamination of a variety of chemical warfare agents and pesticides. They allow for the solubilization of both the lipophilic toxics and the hydrophilic reagent. Alkyl oligoglucosides and plant derived solvents like rapeseed methyl ester enable the formulation of environmentally compatible bicontinuous microemulsions. In the present article the phase behavior of such a microemulsion is studied and the bicontinuous phase is identified. Small angle neutron scattering (SANS) and freeze fracture electron microscopy (FFEM) measurements are used to characterize the structure of the bicontinuous phase and allow for an estimation of the total internal interface. Moreover, also the influence of the co-surfactant (1-pentanol) on the structural parameters of the bicontinuous phase is studied with SANS.

The Influence of Polyampholytes on the Phase Behavior of Microemulsion Used as Template for the Nanoparticle Formation

A series of hydrophobically modified polyampholytes has been synthesized by the copolymerization of the cationic monomer (N,N′‐diallyl‐N,N′‐dimethylammonium chloride) and the anionic monomers maleamic acid or butylmaleamic acid, and their influence on the inverse micellar region of the quaternary system sodium dodecylsulfate/toluene‐pentanol (1:1)/water has been investigated. The polymers increase the water solubilization capacity of the microemulsion at a polymer concentration ≥5%. However, the polyampholyte‐modified inverse microemulsions show a temperature dependent behavior, by the formation at 40°C of a narrow bicontinuous channel between the L2 (w/o) and the L1 (o/w) microemulsion phases. In this case, hydrophobic interactions between the surfactant alkyl tails and the hydrophobic side chains of the copolymer play an important role, too. The reverse microemulsion droplets were used as a template for the synthesis of BaSO4 nanoparticles. The polymers, which are involved in the redispersion process, influence the size and the stability of the nanoparticles formed by preventing their aggregation. Finally, monodisperse BaSO4 nanoparticles with an average size of 5 nm, thus, can be recovered and characterized by dynamic light scattering, zeta potential measurements, and transmission electron microscopy.

Comparison of in vitro and in vivo protein release from hydrogel systems

Hydrogel systems based on hydroxyethyl starch-polyethylene glycol methacrylate (HES-P(EG)(6)MA) or hydroxyethyl starch methacrylate (HES-MA) were used to assess the protein release behavior. Here, we analyzed the in vitro release of FITC-anti-human antibodies incorporated in either HES-P(EG)(6)MA or HES-MA hydrogel delivery systems in PBS or human serum. In addition, hydrogel disks and microparticles prepared from the two polymers were subcutaneously implanted in BALB/c mice. The in vivo release of FITC-IgG was non-invasively monitored by an in vivo imaging system (IVIS 200) over a time period of up to 3 months. The imaging system allowed to asses individual animals over time, therefore only a small number of animals was required to obtain high quality data. The reduction in fluorescence intensity at the site of administration was compared to in vitro release profiles. These investigations demonstrated a sustained release from HES-MA hydrogel disks compared to rapidly degrading HES-P(EG)(6)MA disks and microparticles. The sustained release from HES-MA disks could be further optimized by using increased polymer concentrations. Human serum as in vitro release medium reflected better the in vivo release from HES-P(EG)(6)MA systems than PBS, suggesting that the presence of organic substances like proteins or lipids may play a significant role for the release kinetics.