Bruce G. French

Induced membrane technique for reconstruction to manage bone loss.

&NA; Multiple surgeries are often required to manage segmental bone loss because of the complex mechanics and biology involved in reconstruction. These procedures can lead to prolonged recovery times, poor patient outcomes, and even delayed amputation. A twostage technique uses induced biologic membranes with delayed placement of bone graft to manage this clinical challenge. In the first stage, a polymethyl methacrylate spacer is placed in the defect to produce a bioactive membrane, which appears to mature biochemically and physically 4 to 8 weeks after spacer placement. In the second, cancellous autograft is placed within this membrane and, via elution of several growth factors, the membrane appears to prevent graft resorption and promote revascularization and consolidation of new bone. Excellent clinical results have been reported, with successful reconstruction of segmental bone defects >20 cm.

Compartment pressures during nonreamed tibial nailing without traction.

OBJECTIVE To assess the intracompartmental pressure changes during the nailing of acute tibia fractures with the extrinsic factors of 90 degrees/90 degrees positioning, posterior thigh posts, continuous traction, and remaining removed. STUDY DESIGN Prospective case control. METHODS Fifty-eight acute tibia fractures were nailed using an unreamed technique without leg elevation, thigh post, or continuous traction. Two presented with compartment syndrome and had fasciotomy before nailing. Thirty of the remaining fifty-six tibias had continuous intracompartmental pressure monitoring of the anterior compartment. RESULTS The highest pressures were routinely seen during manual reduction of the fracture (20-58mms Hg; avg = 34mm Hg) and during nail passage (15-56mms Hg; avg = 26mms Hg). In fifteen tibias, the pressure rose to within 30mmg Hg of the diastolic pressure and in 12 tibias the pressure exceeded 40mmg Hg. The pressures in all cases returned to baseline immediately following nail passage (avg = 13.8mms Hg). No sequelae of compartment syndrome was found in any of the 56 tibias presenting without compartment syndrome. There were no iatrogenic compartment syndromes in the series. CONCLUSION When extrinsic factors that increase intramedullary pressures are avoided, then intramedullary nailing raises the intramedullary pressure only momentarily. The pressure peaks during manual reduction and nail passage, and then returns to normal before the patient is awakened. Intramedullary nailing performed without reaming or traction is safe with respect to compartment syndromes and continuous pressure is not required.

Use of the trauma pelvic orthotic device (T-POD) for provisional stabilisation of anterior-posterior compression type pelvic fractures: a cadaveric study.

OBJECTIVE To demonstrate that a commercially available pelvic binder the trauma pelvic orthotic device (T-POD) is an effective way to provisionally stabilise anterior-posterior compression type pelvic injuries. METHODS Rotationally unstable pelvic injuries were created in 12 non-embalmed human cadaveric specimens. Each pelvis was then stabilised first with a standard bed sheet wrapped circumferentially around the pelvis and held in place with a clamp. After recreating the symphyseal diastasis, the pelvis was stabilised with the T-POD. Reduction of the symphyseal diastasis was assessed by comparing measurements obtained via pre- and post-stabilisation AP radiographs. RESULTS The mean symphyseal diastasis was reduced from 39.3mm (95% CI 30.95-47.55) to 17.4mm (95% CI -0.14 to 34.98) with the bed sheet, and to 7.1mm (95% CI -2.19 to 16.35) with the T-POD. CONCLUSIONS Although both a circumferential sheet and the T-POD were able to decrease symphyseal diastasis consistently, only the T-POD showed a statistically significant improvement in diastasis when compared to injury measurements. In 75% of the cadaveric specimens (9 of 12), the T-POD was able to reduce the symphysis to normal (<10mm diastasis). Both a circumferential sheet and the T-POD are effective in provisionally stabilising Burgess and Young anterior-posterior compression II type pelvic injuries, but the T-POD is more effective in reducing symphyseal diastasis.

Does Medial Tenderness Predict Deep Deltoid Ligament Incompetence in Supination-External Rotation Type Ankle Fractures?

Objective: To identify whether medial tenderness is a predictor of deep deltoid ligament incompetence in supination-external rotation ankle fractures. Design: All Weber B lateral malleolar fractures with normal medial clear space over a 9 month period were prospectively included in the study. Fracture patterns not consistent with a supination-external rotation mechanism were excluded. Setting: High-volume tertiary care referral center and Level I trauma center. Patients/Participants: Fifty-five skeletally mature patients with a Weber B lateral malleolar fracture and normal medial clear space presenting to our institution were included. Intervention: All study patients had ankle anteroposterior, lateral, and mortise radiographs. Each patient was seen and evaluated by an orthopedic specialist and the mechanism of injury was recorded. Each patient was assessed for tenderness to palpation in the region of the deltoid ligament and then had an external rotation stress mortise radiograph. Main Outcome Measure: Correlating medial tenderness with deep deltoid competence as measured by stress radiographs. Results: Thirteen patients (23.6%) were tender medially and had a positive external rotation stress radiograph. Thirteen patients (23.6%) were tender medially and had a negative external rotation stress radiograph. Nineteen patients (34.5%) were nontender medially and had a negative external rotation stress radiograph. Ten patients (18.2%) were nontender medially and had a positive external rotation stress radiograph. We calculated a χ2 statistic of 2.37 as well as the associated P value of 0.12. Medial tenderness as a measure of deep deltoid ligament incompetence had a sensitivity of 57%, a specificity of 59%, a positive predictive value of 50%, a negative predictive value of 66%, and an accuracy of 42%. Conclusion: There was no statistical significance between the presence of medial tenderness and deep deltoid ligament incompetence. There is a 25% chance of the fracture in question with medial tenderness having a positive external rotation stress and a 25% chance the fracture with no medial tenderness having a positive stress test. Medial tenderness in a Weber B lateral ankle fracture with a normal clear space on standard plain radiographs does not ensure the presence of a positive external rotation stress test.

Use of an interlocked cephalomedullary nail for subtrochanteric fracture stabilization.

Forty-five Russell-Taylor Type 1B subtrochanteric femoral fractures were stabilized using an interlocked cephalomedullary nail. The intraoperative complication rate was 13.5%; the most frequent complication was a varus malreduction. The union rate was 100% at an average of 13.5 weeks after surgery; there were no implant failures. Forty-three of 45 (96%) patients regained greater than 120 degrees knee motion. Based on these results it is thought that an interlocked cephalomedullary nail may be the implant of choice for stabilization of Russell-Taylor Type 1B fractures; however, its proper use requires careful intraoperative technique, with particular attention given to avoid a varus malreduction.

High-energy tibial shaft fractures.

High-energy tibial fractures are common injuries that are managed by most practicing orthopaedic surgeons. Many methods of treatment are available. This article reviews the options for skeletal stabilization, the risks and benefits of each, and the necessary concepts that effect outcome.

Plating of patella fractures: techniques and outcomes.

Summary: Operative treatment of displaced patella fractures with tension band fixation remains the gold standard, but is associated with a significant rate of complications and symptomatic implants. Despite the evolution of tension band fixation to include cannulated screws, surprisingly little other development has been made to improve overall patient outcomes. In this article, we present the techniques and outcomes of patella plating for displaced patella fractures and patella nonunions.

Medial Malleolar Fractures: A Biomechanical Study of Fixation Techniques

Fracture fixation of the medial malleolus in rotationally unstable ankle fractures typically results in healing with current fixation methods. However, when failure occurs, pullout of the screws from tension, compression, and rotational forces is predictable. We sought to biomechanically test a relatively new technique of bicortical screw fixation for medial malleoli fractures. Also, the AO group recommends tension-band fixation of small avulsion type fractures of the medial malleolus that are unacceptable for screw fixation. A well-documented complication of this technique is prominent symptomatic implants and secondary surgery for implant removal. Replacing stainless steel 18-gauge wire with FiberWire suture could theoretically decrease symptomatic implants. Therefore, a second goal was to biomechanically compare these 2 tension-band constructs. Using a tibial Sawbones model, 2 bicortical screws were compared with 2 unicortical cancellous screws on a servohydraulic test frame in offset axial, transverse, and tension loading. Second, tension-band fixation using stainless steel wire was compared with FiberWire under tensile loads. Bicortical screw fixation was statistically the stiffest construct under tension loading conditions compared to unicortical screw fixation and tension-band techniques with FiberWire or stainless steel wire. In fact, unicortical screw fixation had only 10% of the stiffness as demonstrated in the bicortical technique. In a direct comparison, tension-band fixation using stainless steel wire was statistically stiffer than the FiberWire construct.

Treatment of acetabulum fractures through the modified Stoppa approach: strategies and outcomes.

BackgroundSince the original description by Letournel in 1961, the ilioinguinal approach has remained the predominant approach for anterior acetabular fixation. However, modifications of the original abdominal approach described by Stoppa have made another option available for reduction and fixation of pelvic and acetabular fractures.Questions/purposesWe evaluated our results in patients with acetabulum fractures with the modified Stoppa approach in terms of (1) hip function as measured by the Merle d’Aubigne hip score; (2) complications; and (3) quality of fracture reduction and percentage of fractures that united.MethodsBetween September 2008 and August 2012, 289 patients with acetabular fractures were treated at our Level I trauma center. Twelve percent (36 of 289) of patients were treated operatively using the modified Stoppa approach. Ninety-seven percent (35 of 36) of our patients had fracture patterns involving displacement of the posterior column. Six (17%) were converted early to a total hip arthroplasty, and 14 (39%) were lost to final followup, leaving 22 of 36 for subjective clinical outcome analysis at a mean of 32 months (range, 9–59 months). Our general indications for this approach during the period in question were fractures of the anterior column and anterior wall, anterior column with posterior hemitransverse fractures, both column fractures, transverse fractures, and T-type fractures. Followup included regularly scheduled office visits with radiographs (AP pelvis, Judet views) that were graded by the treating surgeon and by the authors of this study (MJI, BCT) and patient outcome surveys.ResultsMerle d’Aubigne hip scores were very good in 55% (12 of 22), good in 9% (two of 22), medium in 18% (four of 22), fair in 5% (one of 22), and poor in 14% (three of 22), and 70% (23 of 33) of patients were able to ambulate without any assistive devices. Complications included one superficial infection and three deep infections, two patients with temporary lateral thigh numbness, no obturator nerve palsies, and one inguinal hernia. Three deaths in the cohort were seen in followup as a result of unrelated causes. Radiographic grading of fracture reductions after surgery revealed that 27 (75%) were anatomic, six (17%) were satisfactory, and three (8%) were unsatisfactory. A total of 94% of the fractures united.ConclusionsIn agreement with prior published data, our results show good functional outcomes with minimal complications using the modified Stoppa approach for a variety of acetabular fractures. Our results highlight the difficulty but feasibility in treating posterior column displacement through an anterior approach. Consideration for dual approaches with posterior column involvement may be warranted to optimize fracture reduction and functional outcomes.Level of EvidenceLevel IV, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

Consensus statement: Surgical stabilization of rib fractures rib fracture colloquium clinical practice guidelines

Please cite this article as: Pieracci Fredric M, Majercik Sarah, Ali-Osman Francis, Ang Darwin, Doben Andrew, Edwards John G, French Bruce, Gasparri Mario, Marasco Silvana, Minshall Christian, Sarani Babak, Tisol William, VanBoerum Don H, White Thomas W.Consensus Statement: Surgical Stabilization of Rib Fractures Rib Fracture Colloquium Clinical Practice Guidelines.Injury http://dx.doi.org/10.1016/j.injury.2016.11.026