Bruce H. Lipshutz

Cationic Palladium(II) Catalysis: C-H Activation/Suzuki-Miyaura Couplings at Room Temperature

Cationic palladium(II) catalyst realized facile C-H activation of aryl urea with arylboronic acids at room temperature. This reaction is extremely mild to carry out aromatic C-H activations through electrophilic substitution.

Cationic Pd(II)-catalyzed Fujiwara-Moritani reactions at room temperature in water.

Pd(II)-catalyzed Fujiwara-Moritani reactions can be carried out without external acid at room temperature and in water as the only medium. A highly active cationic Pd(II) catalyst, [Pd(MeCN)(4)](BF(4))(2), easily activates aromatic C-H bonds to produce electron-rich cinnamates in good yields.

β-(Trimethylsilyl)ethoxymethyl chloride. A new reagent for the protection of the hydroxyl group

Abstract Reactions of β-(trimethylsilyl)ethoxymethyl chloride with alcohols afford the corresponding ethers in high yield. Deprotection using n-Bu4NF in THF or HMPA cleanly regenerates the hydroxyl function.

Zn-Mediated, Pd-Catalyzed Cross-Couplings in Water at Room Temperature Without Prior Formation of Organozinc Reagents

Mix in water, stir. That is all that is required in this new approach to sp(3)-sp(2) cross-couplings between an alkyl iodide and an aryl bromide, both potentially bearing functionality. They react under catalysis by Pd(0) in the presence of zinc powder, aided by a nonionic amphiphile, to give the alkylated aromatic. No organic solvents and no heating; just add water.

Sonogashira Couplings of Aryl Bromides: Room Temperature, Water Only, No Copper

Cross-coupling reactions between lipophilic terminal alkynes and aryl bromides can be catalyzed by ligated Pd, in the absence of copper, in pure water at ambient temperatures. Small amounts of the nonionic amphiphile PTS assist by virtue of nanometer micelles formed spontaneously in an aqueous medium.

2-thienyl(cyano)copper lithium. A lower order, stable “cuprate in a bottle” precursor to higher order reagents

Abstract The lower order mixed cuprate derived from CuCN and 2-lithiothiophene (i.e., 2-ThCu(CN)Li) is found to have excellent shelf life, thereby providing an easily formed yet itself unreactive precursor to higher order mixed organocuprates.

Pd(II)-catalyzed acetal/ketal hydrolysis/exchange reactions

PdCl2(CH3CN)2 catalyzes the hydrolysis of dioxolane acetals and ketals in moist CH3CN, while in acetoze, efficient and more reproducible exchange reactions take place.

Room temperature C-H activation and cross-coupling of aryl ureas in water.

Palladium-catalyzed cross-coupling reactions of aryl halides with aromatic C–H bonds have emerged as a powerful method for the preparation of biaryls.[1,2] Despite substantially increased attention to the field, typical reaction conditions still require high temperatures (> 120°C) for insertion into aromatic C–H bonds, which can be viewed as a major drawback to this chemistry. Such forcing conditions often appear to be critical to overcoming the low reactivity of aryl C–H bonds. A much milder C–H activation reaction at ambient temperatures would, in particular, likely be more dependent on activation by the catalyst.[3] Although there are many ortho-directing groups for C–H activation reactions,[1] the amide residue in anilides is especially attractive as a coupling partner for the synthesis of valuable aniline derivatives. In 1984, Tremont and co-workers used acetanilides for C–H alkylation with alkyl iodides, albeit promoted by stoichiometric Pd(OAc)2.[4] Both the Daugulis[5] and Sanford[6] groups have demonstrated Pd-catalyzed ortho-arylations of anilides with aryl iodides or iodonium salts at temperatures above 100°C. Moreover, ortho-directed C–H activation can suffer from double arylations with respect to the directing group.[1,5] C–H arylations of reactive indoles have been reported at room temperature,[7] but to the best of our knowledge C–H arylation of anilide derivatives with aryl halides at ambient temperatures have not yet been achieved.[1,8] Herein, we describe the first room temperature mono-C–H activation of urea derivatives and their cross-couplings with aryl iodides in water (Scheme 1). This methodology provides a convenient route to various aniline derivatives by means of C–H activation under mild conditions. Scheme 1 C–H activation at room temperature in water. Optimization studies employed the combination of anilides (1a–f) and 4-iodoanisole (2a, 2 equiv) in the presence of Pd(OAc)2 (10 mol%), AgOAc (2 equiv) and aqueous HBF4 (5 equiv) in 2 wt% surfactant/water solutions at room temperature (Table 1). The effectiveness of various directing groups was initially examined, and among a number of different anilide derivatives 1a–f explored, only the aromatic urea 1f smoothly underwent C–H arylation at room temperature (Table 1, runs 1–6). Recently, Lloyd-Jones and Booker-Milburn have also found aryl ureas to be more active coupling partners for C–H functionalizations than other anilides.[9] Acetanilide 1a reacted with 2a only upon heating to 50°C. Pivaloylanilide 1c has been reported as an effective directing group at 130°C,[1,2,5] but gave a low yield under these room temperature conditions (run 3). Generally, acetic acid or trifluoroacetic acid (TFA) is required to carry out C–H activation;[1,2] in this case, HBF4 was found to be critical for generation of biaryl 3 in good yield (run 6). Table 1 Optimization of C–H arylations at room temperature.[a] Although use of the surfactant PTS[10] gave good yields, comparable results were realized with several commercially available amphiphiles. Best yields were obtained using 2 wt% Brij35 in water (Table 1, runs 7–13). Reduced amounts of HBF4, silver salt, or palladium catalyst led to lower yields. A plausible rationale for these results involves generation of a highly active cationic palladium species (Scheme 2).[7c,11] Scheme 2 Generation of a cationic palladium(II) species. As illustrated by several representative examples in Table 2, the scope of this transformation is broad, applying to aryl urea derivatives and aryl iodides bearing a variety of functional groups with yields in the 70–97% range, all done in water at room temperature. Under these mild conditions, only mono-arylated products of net substitution were typically obtained. Table 2 Products from reactions of aryl ureas with aryl iodides.[a] Especially noteworthy are aniline derivatives lacking ortho- or meta-substitution, which have previously been shown to be prone to double arylation. Under these conditions, couplings are selective for singly arylated products (3f, 3r, 3s, 3v). Only reactions of the aryl urea bearing a 4-sec-butyl group with phenyliodide and 4-tolyl iodide produced small amounts (10–15% yields) of doubly arylated products. Reduced aryl iodide loading or reaction time, however, suppressed double arylation to less than 3% (3t, 3u). While current reaction conditions were effective for a variety of substrates, products resulting from sterically hindered aryl iodides having ortho-substituents, such as 2-anisyl iodide and 2-tolyl iodide, were not formed (3b, 3n). The reactivity of N-methyl substituted ureas (e.g., 3x) appears to be much lower than that of their non-N-methyl-substituted analogues, possibly due to palladium coordination in the initial C–H activation step. Electron-deficient ureas (e.g., 3q) were also inert, suggesting that electrophilic attack of cationic palladium may be critical for activating aromatic C–H bonds. The reactivity of aryl iodides possessing electron-rich groups is also much higher than that of more electron-withdrawing aryl iodides (3a vs. 3e). Further advantage can also be taken of the reaction conditions associated with these cross-couplings to allow for tandem processes. Thus, in the presence of silver nitrate, arylation afforded a product of type 3 exclusively, following standard treatment with hydrogen carbonate (Scheme 3). Without exposure to this aqueous workup, nitrated biaryl 4 was isolated. Since use of silver acetate gave only arylated product 3a regardless of quenching conditions, the potential for carrying out secondary electrophilic aromatic substitution could readily be demonstrated. Simple introduction of bromine prior to workup afforded the C-arylated, regiospecifically brominated adduct 5 in good overall isolated yield (70%). The identities of products 3a and 4 were confirmed by X-ray analyses (see Supporting Information). Scheme 3 Tandem C–H arylation–electrophilic trapping. While the exact reaction mechanism is currently unclear, one possibility involves a cationic PdII complex-catalyzed electrophilic C–H activation step.[7,11] Nevertheless, the reaction of 1f and 2a (see Table 2) in the presence of [Pd(MeCN)4](BF4)2, a commercially available cationic palladium(II) complex, did not result in the formation of product (Scheme 4, top). It was found, however, that adding 40 mol% MeCN under the standard, optimized, and otherwise successful conditions (cf. Table 2, product 3a; 76% yield), only traces of product formation was observed (Scheme 4, bottom). This suggests that the low reactivity of the pre-formed cationic palladium complex may actually be due to suppression of the reaction by MeCN coordination to the Lewis acidic PdII. Scheme 4 Effect of cationic palladium species. With the goal of generating a highly active cationic PdII complex without the aid of strong acid, and in the absence of coordinating ligands, the combination of Pd(OAc)2 and AgBF4 was examined (Scheme 5). As expected, these conditions led to C–H activation. Unlike the reaction with AgOAc, the reaction with AgBF4 produced the corresponding C–H arylated product 3a without assistance of external acid at room temperature. This result, under such mild conditions, is indicative of the potential for highly active cationic palladium species to serve as especially effective catalysts for C–H arylation reactions. The silver salt may not only weaken the C–I bond and/or function as halogen scavenger, but may also play an important role in the generation of cationic palladium(II) species. Scheme 5 C–H activation without acids at room temperature in water. In summary, the first room temperature C–H arylation of anilides with aryl iodides to give biaryl derivatives in good yields is described. These are accomplished using aryl urea derivatives, and are all done in water in the absence of phosphine ligands. Further studies of metal-catalyzed C–H activation reactions at room temperature, including both Heck couplings and mechanistic studies, are currently under investigation.

Room-Temperature Suzuki−Miyaura Couplings in Water Facilitated by Nonionic Amphiphiles†

Use of a dilute aqueous solution containing a nonionic amphiphile allows efficient Suzuki-Miyaura cross-couplings of arylboronic acids with a wide array of aryl halides and pseudohalides, including sterically hindered and lipophilic substrates, in most cases at room temperature.

Transmetalation reactions of higher order cyanocuprates: Direct formation of trialkyltin cuprates from tin hydrides which bypasses organolithium intermediates

Abstract Simple exposure of n-Bu 3 SnH to Bu 2 Cu(CN)Li 2 in THF at low temperatures leads directly to the presumed mixed higher order trialkyltin cuprate, the reactions of which selectively transfer the trialkylstannyl group to a variety of substrates.