Bruna Genari

Antimicrobial effect and physicochemical properties of an adhesive system containing nanocapsules

OBJECTIVE To incorporate indomethacin and triclosan-loaded nanocapsules into primer and adhesive, and evaluate its properties. METHODS Indomethacin and triclosan were encapsulated by deposition of preformed polymer and subsequently characterized regarding morphology, particle size, drug content and cytotoxicity. Nanocapsules (NCs) were incorporated into primer at 2% and into adhesive at 1, 2, 5, and 10% concentrations. Degree of conversion (DC) and softening in ethanol of the adhesive were evaluated. Drug release and drug diffusion through dentin was quantified by high performance liquid chromatography. Antimicrobial test was performed until 96h. RESULTS Spherical and biocompatible NCs presented mean size of 159nm. Drugs content was 3mg indomethacin/g powder and 2mg triclosan/g powder. Incorporating NCs in adhesive showed no influence in DC (p=0.335). The addition of 2% of NCs showed no influence in softening in ethanol (p>0.05). After 120h, 93% of indomethacin and 80% of triclosan were released from primer, 20% of indomethacin and 17% of triclosan were released from adhesive with 10% of NCs. Indomethacin showed diffusion through dentin. In 24h, adhesive containing 2 and 5% of NCs using primer with NCs showed antimicrobial effect. In 96h, adhesives containing different concentration of NCs promoted antimicrobial effect. CONCLUSIONS Indomethacin and triclosan-loaded nanocapsules were successfully incorporated into primer and adhesive, promoting controlled drugs release, indomethacin diffusion through dentin and antimicrobial effect without compromising its physicochemical properties. SIGNIFICANCE Indomethacin and triclosan-loaded nanocapsules have potential to prevent recurrent caries and to be used in deep cavities controlling pulpar inflammatory process.

Influence of the addition of microsphere load amoxicillin in the physical, chemical and biological properties of an experimental endodontic sealer

AIM To develop an endodontic sealer with amoxicillin-loaded microsphere and to evaluate its properties. METHODS Experimental sealer was obtained by mixing 70wt% UDMA, 15wt% GDMA and 15wt% BISEMA. In addition, CQ, DHEPT and PB were incorporated at 1 mol% and 0.01wt% BHT and 10wt% YbF3. Microspheres were produced by drying in spray dryer. Two experimental groups (10 and 15wt% of microspheres) and one control group (without microspheres) were formulated. The sealers were evaluated for the degree of conversion (n=3), degradation in solvent (n=3), drug release profile (n=3), antimicrobial activity (n=3), flow (n=3), film thickness (n=3) and cytotoxicity (n=3). Data were analyzed by ANOVA and Tukey with significance level of 5%. RESULTS Microespheres presented a mean size of 2.664μm. Immediate degree of conversion ranged from 51.73% to 55.13% and the 24h degree of conversion ranged from 60.79% to 73.80%. Upon solvent degradation 54.44% and 56.21% reduction in hardness were observed for 10% and 15% concentrations respectivelly. The drug release profile showed an average release of 73.76% of the drug in 96h. Significant reduction in antimicrobial activity was observed for 10% concentration after 24h, 48h and 96h compared to control. The flow and film thickness showed values in accordance to the ISO 6876. Cytotoxicity showed high cellular viability. CONCLUSION The addition of up to 10% of microspheres containing amoxicillin presented antimicrobial activity and did not alter the properties of the experimental endodontic cement. CLINICAL SIGNIFICANCE Amoxicillin microspheres with its antimicrobial activity in root canal sealers could reduce reintervations in endodontics when persistent bacteria or reinfection takes place in root canal system.

Bismuth subsalicylate as filler particle for an experimental epoxy-based root canal sealer

Aim: To evaluate the influence of bismuth subsalicylate addition in different concentrations on theproperties ofan experimental epoxy-based root canal sealer. Methods: Bismuth subsalicylate in 20%, 40%, 60%, 80%, 100% and 120 wt% was added tothe sealer. Flow, film thickness, working time, setting time, dimensional change, sorption, solubility and cytotoxicity were evaluated according to ISO standard. Data were statistically analyzed by one-way ANOVA and Tukey’stest with a significance level of 5% for all tests. Results: The flow, working and setting times significantly decreased withincreasing particle concentration. The film thickness, dimensional change, water sorption and solubility values significantly increased with higher particle amount. The results for cytotoxicity showed no statistically significant differences among the particle proportions. Conclusions: The results suggest that the addition up to 80% wt of bismuth subsalicylate appears to be a promising filler particle to root canal sealer development.

Enamel Roughness Changes after Removal of Orthodontic Adhesive

The aim of this study was to evaluate enamel roughness, quality of the enamel surfaces and time duration comparing different orthodontic adhesive removal protocols. Premolars were used to test three adhesive removal methods (n = 20): five-blade carbide bur, 30-blade carbide bur, and ultrasonic diamond bur. Bracket was bonded using TransbondTM XT adhesive. Roughness with different parameters was measured before bracket bonding and after adhesive remnants removal. Micromorphological analysis of enamel surface (n = 5) was performed by SEM images and categorized in enamel damage index—“perfect”; “satisfying”; “imperfect”; and “unacceptable”. Time was measured in seconds. All removal methods caused increased roughness in relation to Ra, Rq, and Rz parameters (X axis) comparing to healthy enamel surface. Enamel surface resulted from removal using five-blade burs was scored as satisfactory. Carbide bur groups decreased the roughness values of Ra, Rq, and Rz parameters on the Y axis and enamel surface was considered unacceptable. The 30-blade group increased symmetry (Rsk) and flattening (Rku) parameters of roughness and surface was scored as unsatisfactory. Diamond bur removed adhesive in 54.8 s, faster than five-blade carbide bur. The five-blade bur group resulted in less enamel roughness than the 30-blade and diamond groups.

Anti-inflammatory effect of an adhesive resin containing indomethacin-loaded nanocapsules

OBJECTIVE To analyze the anti-inflammatory and analgesic effects of an adhesive resin containing indomethacin-loaded nanocapsules in rat model. DESIGN Adhesive resin disks with or without indomethacin-loaded nanocapsules were subcutaneously implanted into right hind paw of rats. A week after surgical procedure, 2% formalin solution was intradermally injected into plantar surface of paw. Nociceptive and inflammatory responses were evaluated by formalin test. Paw edema by pletismometer and mechanical hyperalgesia by von Frey test were performed on day 2, day 4, day 6, day 8, day 10 and day 12 after surgery. IL-6, IL-10, and lactate dehydrogenase (LDH) serum levels were determined by ELISA-sandwich test. RESULTS Group containing indomethacin-loaded nanocapsules (NC) presented lower edema in the right hind paw at 24h after formalin injection than those of the control group (CT) (P<0.01). NC group showed decrease in the nociceptive response in phase I (neurogenic pain) compared to CT group (NC - 66.86±22.83s X CT - 130.17±35.83s, P<0.001). NC group presented supporting higher intensity of stimulus on days 8 and 12 (24h and 72h after formalin injection) (P<0.01 and P<0.02 respectively). The IL-6 serum level was also significantly higher in the NC group than CT group (p<0.001). CONCLUSIONS These results indicate that an adhesive resin containing indomethacin-loaded nanocapsules has anti-inflammatory and nociceptive activities in a chemical model of acute inflammation. The present investigation confirms an adhesive resin with drug-loaded nanocapsules may be useful for improving therapeutic effect for adhesives to be used in deep cavities.