Bryan S. Robinson

781 Mbit/s photon-counting optical communications using a superconducting nanowire detector

We demonstrate 1550 nm photon-counting optical communications with a NbN-nanowire superconducting single-photon detector. Source data are encoded with a rate-1/2 forward-error correcting code and transmitted by use of 32-ary pulse-position modulation at 5 and 10 GHz slot rates. Error-free performance is obtained with -0.5 detected photon per source bit at a source data rate of 781 Mbits/s. To the best of our knowledge, this is the highest reported data rate for a photon-counting receiver.

100 Gb/s optical time-division multiplexed networks

We present ultrafast slotted optical time-division multiplexed networks as a viable means of implementing a highly capable next-generation all-optical packet-switched network. Such a network is capable of providing simple network management, the ability to support variable quality-of-service, self-routing of packets, scalability in the number of users, and the use of digital regeneration, buffering, and encryption. We review all-optical switch and Boolean logic gate implementations using an ultrafast nonlinear interferometers (UNIs) that are capable of stable, pattern-independent operation at speeds in excess of 100 Gb/s. We expand the capability provided by the UNI beyond switching and logic demonstrations to include system-level functions such as packet synchronization, address comparison, and rate conversion. We use these advanced all-optical signal processing capabilities to demonstrate a slotted OTDM multiaccess network testbed operating at 112.5 Gb/s line rates with inherent scalability in the number of users and system line rates. We also report on long-haul propagation of short optical pulses in fiber and all-optical 3R regeneration as a viable cost-effective means of extending the long-haul distance of our OTDM network to distances much greater than 100 km.

Multi-Element Superconducting Nanowire Single-Photon Detector

A multi-element superconducting nanowire single photon detector (MESNSPD) is presented that consists of multiple independently-biased superconducting nanowire single photon detector (SNSPD) elements that form a continuous active area. A two-element SNSPD has been fabricated and tested, showing no measurable crosstalk between the elements, sub-50-ps relative timing jitter, and four times the maximum counting rate of a single SNSPD with the same active area. The MESNSPD can have a larger active area and higher speed than a single-element SNSPD and the input optics can be designed so that the detector provides spatial, spectral or photon number resolution.

Photon-number-resolution with sub-30-ps timing using multi-element superconducting nanowire single photon detectors

A photon-number-resolving detector based on a four-element superconducting nanowire single photon detector is demonstrated to have sub-30-ps resolution in measuring the arrival time of individual photons. This detector can be used to characterise the photon statistics of non-pulsed light sources and to mitigate dead-time effects in high-speed photon counting applications. Furthermore, a 25% system detection efficiency at 1550 nm was demonstrated, making the detector useful for both low-flux source characterization and high-speed photon counting and quantum communication applications. The design, fabrication, and testing of this detector are described, and a comparison between the measured and the theoretical performance is presented.

Overview and Results of the Lunar Laser Communication Demonstration

From mid-October through mid-November 2013, NASA’s Lunar Laser Communication Demonstration (LLCD) successfully demonstrated for the first time duplex laser communications between a satellite in lunar orbit, the Lunar Atmosphere and Dust Environment Explorer (LADEE), and ground stations on the Earth. It constituted the longest-range laser communication link ever built and demonstrated the highest communication data rates ever achieved to or from the Moon. The system included the development of a novel space terminal, a novel ground terminal, two major upgrades of existing ground terminals, and a capable and flexible ground operations infrastructure. This presentation will give an overview of the system architecture and the several terminals, basic operations of both the link and the whole system, and some typical results.

The lunar laser communications demonstration

The Lunar Laser Communications Demonstration represents NASAs first attempt to demonstrate optical communications from a lunar orbiting spacecraft to an Earth-based ground receiver. A low size, weight and power optical terminal will be integrated onto the Lunar Atmosphere and Dust Environment Explorer (LADEE) spacecraft, presently scheduled to launch in 2013. LLCD will demonstrate duplex optical communications between this small space terminal and a multi-aperture photon-counting ground terminal at downlink data rates of up to 622 Mbps and uplink data rates of up to 20 Mbps.

Demonstration of 2.5-Gslot/s optically-preamplified M-PPM with 4 photons/bit receiver sensitivity

Photon-efficient optical communications using variable-duty-cycle M-ary pulse-position modulation (M-PPM) with coding is investigated experimentally using a simple, multi-rate nearly quantum-limited receiver with throughputs ranging from 1.25 Gbit/s, in the binary case, to 78 Mbit/s, for M=256.

Overview and status of the Lunar Laser Communications Demonstration

The Lunar Laser Communications Demonstration (LLCD), a project being undertaken by MIT Lincoln Laboratory, NASAs Goddard Space Flight Center, and the Jet Propulsion Laboratory, will be NASAs first attempt to demonstrate optical communications between a lunar orbiting spacecraft and Earth-based ground receivers. The LLCD space terminal will be flown on the Lunar Atmosphere and Dust Environment Explorer (LADEE) spacecraft, presently scheduled to launch in 2013. LLCD will demonstrate downlink optical communications at rates up to 620 Mbps, uplink optical communications at rates up to 20 Mbps, and two-way time-of-flight measurements with the potential to perform ranging with sub-centimeter accuracy.

Design of a ground-based optical receiver for the lunar laser communications demonstration

In this paper we present a design for a photoncounting optical receiver—based on superconducting NbN nanowire detector arrays—that will be employed in the ground terminal for the NASA Lunar Laser Communications Demonstration. The ground receiver is designed with four, 40 cm apertures, each coupled to a novel multi-mode polarization-maintaining fiber. The receiver is designed to receive a variable-rate pulse-position-modulated signal with a maximum data rate of 622 Mb/s.

Ultra-wide-range multi-rate DPSK laser communications

We propose and demonstrate a scalable high-sensitivity approach for achieving multi-rate DPSK using a single transmitter and fixed-interferometer-receiver design. Near-theoretical real-time performance is demonstrated over static and fading channels at rates from 2.4Mbps to 2.5Gbps.