Bryan W. Boudouris

Controlling inelastic light scattering quantum pathways in graphene

Inelastic light scattering spectroscopy has, since its first discovery, been an indispensable tool in physical science for probing elementary excitations, such as phonons, magnons and plasmons in both bulk and nanoscale materials. In the quantum mechanical picture of inelastic light scattering, incident photons first excite a set of intermediate electronic states, which then generate crystal elementary excitations and radiate energy-shifted photons. The intermediate electronic excitations therefore have a crucial role as quantum pathways in inelastic light scattering, and this is exemplified by resonant Raman scattering and Raman interference. The ability to control these excitation pathways can open up new opportunities to probe, manipulate and utilize inelastic light scattering. Here we achieve excitation pathway control in graphene with electrostatic doping. Our study reveals quantum interference between different Raman pathways in graphene: when some of the pathways are blocked, the one-phonon Raman intensity does not diminish, as commonly expected, but increases dramatically. This discovery sheds new light on the understanding of resonance Raman scattering in graphene. In addition, we demonstrate hot-electron luminescence in graphene as the Fermi energy approaches half the laser excitation energy. This hot luminescence, which is another form of inelastic light scattering, results from excited-state relaxation channels that become available only in heavily doped graphene.

Poly(3-alkylthiophene) Diblock Copolymers with Ordered Microstructures and Continuous Semiconducting Pathways

Conjugated rod-coil diblock copolymers self-assemble due to a balance of liquid crystalline (rod-rod) and enthalpic (rod-coil) interactions. Previous work has shown that while classical block copolymers self-assemble into a wide variety of nanostructures, when rod-rod interactions dominate self-assembly in rod-coil block copolymers, lamellar structures are preferred. Here, it is demonstrated that other, potentially more useful, nanostructures can be formed when these two interactions are more closely balanced. In particular, hexagonally packed polylactide (PLA) cylinders embedded in a semiconducting poly(3-alkylthiophene) (P3AT) matrix can be formed. This microstructure has been long-sought as it provides an opportunity to incorporate additional functionalities into a majority phase nanostructured conjugated polymer, for example in organic photovoltaic applications. Previous efforts to generate this phase in polythiophene-based block copolymers have failed due to the high driving force for P3AT crystallization. Here, we demonstrate that careful design of the P3AT moiety allows for a balance between crystallization and microphase separation due to chemical dissimilarity between copolymer blocks. In addition to hexagonally packed cylinders, P3AT-PLA block copolymers form nanostructures with long-range order at all block copolymer compositions. Importantly, the conjugated moiety of the P3AT-PLA block copolymers retains the crystalline packing structure and characteristic high time-of-flight charge transport of the homopolymer polythiophene (μ(h) ~10(-4) cm(2) V(-1) s(-1)) in the confined geometry of the block copolymer domains.

Controlled radical polymerization and quantification of solid state electrical conductivities of macromolecules bearing pendant stable radical groups.

Macromolecules with aliphatic backbones that bear pendant stable radical groups (i.e., radical polymers) have attracted much attention in applications where a supporting electrolyte is capable of aiding charge transport in solution; however, the utilization of these materials in solid state applications has been limited. Here, we synthesize a model radical polymer, poly(2,2,6,6-tetramethylpiperidinyloxy methacrylate) (PTMA), through a controlled reversible addition-fragmentation chain transfer (RAFT) mediated polymerization mechanism to generate well-defined and easily-tunable functional polymers. These completely amorphous, electronically-active polymers demonstrate relatively high glass transition temperatures (Tg ∼170 °C) and, because of the aliphatic nature of the backbone of the radical polymers, are almost completely transparent in the visible region of the electromagnetic spectrum. Additionally, we quantify the conductivity of PTMA (∼1×10(-6) S cm(-1)) and find it to be on par with pristine π-conjugated polymers such as poly(phenylene vinylenes) (PPVs) and poly(3-alkylthiophenes) (P3ATs). Furthermore, we demonstrate that the addition of small molecules bearing stable radical groups provides for more solid state charge hopping sites without altering the chemical nature of radical polymers; this, in turn, allows for an increase in the conductivity of PTMA relative to neat PTMA thin films while still retaining the same high degree of optical transparency and device stability. Because of the synthetic flexibility and easily-controlled doping mechanisms (that do not alter the PTMA chemistry), radical polymers present themselves as promising and tunable materials for transparent solid-state plastic electronic applications.

Quantification of the solid-state charge mobility in a model radical polymer

We establish that an oft-used radical polymer, poly(2,2,6,6-tetramethylpiperidinyloxy methacrylate) (PTMA), has a solid-state hole mobility value on the order of 10−4 cm2 V−1 s−1 in a space charge-limited device geometry. Despite being completely amorphous and lacking any π-conjugation, these results demonstrate that the hole mobility of PTMA is comparable to many well-studied conjugated polymers [e.g., poly(3-hexylthiophene)]. Furthermore, we show that the space charge-limited charge carrier mobility of these macromolecules is only a weak function of temperature, in contrast to many thermally-activated models of charge transport in polymeric materials. This key result demonstrates that the charge transport in radical polymers is inherently different than that in semicrystalline, conjugated polymers. These results establish the mechanism of solid-state charge transport in radical polymers and provide macromolecular design principles for this emerging class of organic electronic materials.

PN junction rectification in electrolyte gated Mg-doped InN

PN junction rectification is demonstrated in indium nitride. The junction is formed between the n-type surface accumulation layer and the Mg-doped, p-type bulk in a top-contacted thin film structure. The parasitic shorting path between the top contacts is controlled by gating with an electrolyte. For positive gate voltages, electrons accumulate at the surface and the current flows preferentially through n type regions, and linear current-voltage (I-V) behavior is observed. However, for negative gate voltages, surface electrons are depleted and current flows through the p-type bulk. This creates an n-p-n structure and a characteristic non-linear I-V curve is observed.

Nanostructured Membranes from Triblock Polymer Precursors as High Capacity Copper Adsorbents

Membrane adsorbers are a proposed alternative to packed beds for chromatographic separations. To date, membrane adsorbers have suffered from low binding capacities and/or complex processing methodologies. In this work, a polyisoprene-b-polystyrene-b-poly(N,N-dimethylacrylamide) (PI-PS-PDMA) triblock polymer is cast into an asymmetric membrane that possesses a high density of nanopores (d ∼ 38 nm) at the upper surface of the membrane. Exposing the membrane to a 6 M aqueous hydrochloric acid solution converts the PDMA brushes that line the pore walls to poly(acrylic acid) (PAA) brushes, which are capable of binding metal ions (e.g., copper ions). Using mass transport tests and static binding experiments, the saturation capacity of the PI-PS-PAA membrane was determined to be 4.1 ± 0.3 mmol Cu(2+) g(-1). This experimental value is consistent with the theoretical binding capacity of the membranes, which is based on the initial PDMA content of the triblock polymer precursor and assumes a 1:1 stoichiometry for the binding interaction. The uniformly sized nanoscale pores provide a short diffusion length to the binding sites, resulting in a sharp breakthrough curve. Furthermore, the membrane is selective for copper ions over nickel ions, which permeate through the membrane over 10 times more rapidly than copper during the loading stage. This selectivity is present despite the fact that the sizes of these two ions are nearly identical and speaks to the chemical selectivity of the triblock polymer-based membrane. Furthermore, addition of a pH 1 solution releases the bound copper rapidly, allowing the membrane to be regenerated and reused with a negligible loss in binding capacity. Because of the high binding capacities, facile processing method implemented, and ability to tailor further the polymer brushes lining the pore walls using straightforward coupling reactions, these membrane adsorbers based on block polymer precursors have potential as a separation media that can be designed to a variety of specific applications.

Solution-based synthesis and characterization of earth abundant Cu3(As,Sb)Se4 nanocrystal alloys: towards scalable room-temperature thermoelectric devices

A simple and scalable solution-based synthesis route for impurity free Cu3(As,Sb)Se4 nanocrystal alloys is reported. Additionally, a heat treatment process that eliminates many scalability limitations imposed by traditional sintering methods has been demonstrated to significantly improve both the grain structure and electronic properties of the Cu3(As,Sb)Se4 nanocrystal based thin films. The combination of a new synthetic pathway with a robust thin film processing methodology offers the promise of widespread application of these materials to many fields. We demonstrate the potential of this material system in a proof-of-concept energy conversion application. Here, the processed Cu3(As,Sb)Se4 nanocrystal thin films serve as room temperature thermoelectric materials demonstrating a large thermoelectric performance after heat treatment.

Collection-limited theory interprets the extraordinary response of single semiconductor organic solar cells

Significance We demonstrate that, instead of the charge generation mechanism, charge collection can readily explain the bottleneck toward higher efficiency single organic semiconductor based OPVs (SS-OPVs). This change in archetype has the potential to transform the design rules for materials used in OPV devices and would inspire searches for a completely different set of polymers for OPV cells. Furthermore, we believe that our findings will broaden the understanding of the physics of charge transport and the impact of charged defect states in organic electronic devices. Hence, this work should have deep and immediate impact on the chemists, materials scientists, and device physicists in the field and would be of broad interest to the organic electronics community. The bulk heterojunction (BHJ) organic photovoltaic (OPV) architecture has dominated the literature due to its ability to be implemented in devices with relatively high efficiency values. However, a simpler device architecture based on a single organic semiconductor (SS-OPV) offers several advantages: it obviates the need to control the highly system-dependent nanoscale BHJ morphology, and therefore, would allow the use of broader range of organic semiconductors. Unfortunately, the photocurrent in standard SS-OPV devices is typically very low, which generally is attributed to inefficient charge separation of the photogenerated excitons. Here we show that the short-circuit current density from SS-OPV devices can be enhanced significantly (∼100-fold) through the use of inverted device configurations, relative to a standard OPV device architecture. This result suggests that charge generation may not be the performance bottleneck in OPV device operation. Instead, poor charge collection, caused by defect-induced electric field screening, is most likely the primary performance bottleneck in regular-geometry SS-OPV cells. We justify this hypothesis by: (i) detailed numerical simulations, (ii) electrical characterization experiments of functional SS-OPV devices using multiple polymers as active layer materials, and (iii) impedance spectroscopy measurements. Furthermore, we show that the collection-limited photocurrent theory consistently interprets typical characteristics of regular SS-OPV devices. These insights should encourage the design and OPV implementation of high-purity, high-mobility polymers, and other soft materials that have shown promise in organic field-effect transistor applications, but have not performed well in BHJ OPV devices, wherein they adopt less-than-ideal nanostructures when blended with electron-accepting materials.

Tuning the Thermoelectric Properties of a Conducting Polymer through Blending with Open-Shell Molecular Dopants.

UNLABELLED Polymer thermoelectric devices are emerging as promising platforms by which to convert thermal gradients into electricity directly, and poly(3,4-ethylene dioxythiophene) doped with poly(styrenesulfonate) ( PEDOT PSS) is a leading candidate in a number of these thermoelectric modules. Here, we implement the stable radical-bearing small molecule 4-hydroxy-2,2,6,6-tetramethylpiperidin-1-oxyl (TEMPO-OH) as an intermolecular dopant in order to tune the electrical conductivity, thermopower, and power factor of PEDOT PSS thin films. Specifically, we demonstrate that, at moderate loadings (∼2%, by weight) of the open-shell TEMPO-OH molecule, the thermopower of PEDOT PSS thin films is increased without a marked decline in the electrical conductivity of the material. This effect, in turn, allows for an optimization of the power factor in the composite organic materials, which is a factor of 2 greater than the pristine PEDOT PSS thin films. Furthermore, because the loading of TEMPO-OH is relatively low, we observe that there is little change in either the crystalline nature or surface topography of the composite films relative to the pristine PEDOT PSS films. Instead, we determine that the increase in the thermopower is due to the presence of stable radical sites within the PEDOT PSS that persist despite the highly acidic environment that occurs due to the presence of the poly(styrenesulfonate) moiety. Additionally, the oxidation-reduction-active (redox-active) nature of the TEMPO-OH small molecules provides a means by which to filter charges of different energy values. Therefore, these results demonstrate that a synergistic combination of an open-shell species and a conjugated polymer allows for enhanced thermoelectric properties in macromolecular systems, and as such, it offers the promise of a new design pathway in polymer thermoelectric materials.

Nanoporous Block Polymer Thin Films Functionalized with Bio-Inspired Ligands for the Efficient Capture of Heavy Metal Ions from Water

Heavy metal contamination of water supplies poses a serious threat to public health, prompting the development of novel and sustainable treatment technologies. One promising approach is to molecularly engineer the chemical affinity of a material for the targeted removal of specific molecules from solution. In this work, nanoporous polymer thin films generated from tailor-made block polymers were functionalized with the bio-inspired moieties glutathione and cysteamine for the removal of heavy metal ions, including lead and cadmium, from aqueous solutions. In a single equilibrium stage, the films achieved removal rates of the ions in excess of 95%, which was consistent with predictions based on the engineered material properties. In a flow-through configuration, the thin films achieved an even greater removal rate of the metal ions. Furthermore, in mixed ion solutions the capacity of the thin films, and corresponding removal rates, did not demonstrate any reduction due to competitive adsorption effects. After such experiments the material was repeatedly regenerated quickly with no observed loss in capacity. Thus, these membranes provide a sustainable platform for the efficient purification of lead- and cadmium-contaminated water sources to safe levels. Moreover, their straightforward chemical modifications suggest that they could be engineered to treat sources containing other recalcitrant environmental contaminants as well.