Bryan W. Tillman

A Review of PMMA Bone Cement and Intra-Cardiac Embolism

Percutaneous vertebroplasty procedure is of major importance, given the significantly increasing aging population and the higher number of orthopedic procedures related to vertebral compression fractures. Vertebroplasty is a complex technique involving the injection of polymethylmethacrylate (PMMA) into the compressed vertebral body for mechanical stabilization of the fracture. Our understanding and ability to modify these mechanisms through alterations in cement material is rapidly evolving. However, the rate of cardiac complications secondary to PMMA injection and subsequent cement leakage has increased with time. The following review considers the main effects of PMMA bone cement on the heart, and the extent of influence of the materials on cardiac embolism. Clinically, cement leakage results in life-threatening cardiac injury. The convolution of this outcome through an appropriate balance of complex material properties is highlighted via clinical case reports.

A retrievable rescue stent graft and radiofrequency positioning for rapid control of noncompressible hemorrhage.

BACKGROUND Noncompressible hemorrhage of the torso remains a challenging surgical dilemma. Stent graft repair requires endovascular expertise, imaging, and inventory that are not available within the critical window of massive hemorrhage. We developed a retrievable stent graft for rapid hemorrhage. We further investigated a radiofrequency (RF) positioning approach as a possible alternative to the logistics of fluoroscopy. METHODS A retrievable stent graft was constructed with a novel “petal and stem” design from nitinol and covered with a sleeve of electrospun polyurethane. The stent graft was tested using an in vitro model of simulated hemorrhage. Next, the stent graft was examined in vivo using a porcine model of noncompressible hemorrhage. The stent was examined for hemorrhage control in a porcine model of either aortic or caval injury. An RF reader was assembled from an Arduino processor while RF tags were affixed to the ends of the stent graft. Detection accuracy of a handheld RF wand for an RF tag was quantified both in vitro and through tissue. RESULTS The retrievable RESCUEstent graft was deployed within minutes and rapidly controlled traumatic hemorrhage angiographically in both aortic injury (n = 3) and caval injury (n = 2). Stent grafts were easily recaptured in both models in under 15 seconds. The LED light of a handheld RF detector illuminated when positioned directly over an RF tag. The RF detection approach revealed positioning accuracy to within 1 cm of the intended target, despite tissue interference. CONCLUSION This study demonstrates the rapid deployment and retrieval of a RESCUE stent graft as well as the ability to tamponade injuries of the aorta and cava. In addition, this study demonstrates the feasibility of RF tags to guide stent placement through tissue. More rigorous models are needed to define the effectiveness of this approach in the setting of vascular injury and shock.

An in vivo pilot study of a microporous thin film nitinol-covered stent to assess the effect of porosity and pore geometry on device interaction with the vessel wall

Sputter-deposited thin film nitinol constructs with various micropatterns were fabricated to evaluate their effect on the vessel wall in vivo when used as a covering for commercially available stents. Thin film nitinol constructs were used to cover stents and deployed in non-diseased swine arteries. Swine were sacrificed after approximately four weeks and the thin film nitinol-covered stents were removed for histopathologic evaluation. Histopathology revealed differences in neointimal thickness that correlated with the thin film nitinol micropattern. Devices covered with thin film nitinol with a lateral × vertical length = 20 × 40 µm diamond pattern had minimal neointimal growth with well-organized cell architecture and little evidence of ongoing inflammation. Devices covered with thin film nitinol with smaller fenestrations exhibited a relatively thick neointimal layer with inflammation and larger fenestrations showed migration of inflammatory and smooth muscle cells through the micro fenestrations. This “proof-of-concept” study suggests that there may be an ideal thin film nitinol porosity and pore geometry to encourage endothelialization and incorporation of the device into the vessel wall. Future work will be needed to determine the optimal pore size and geometry to minimize neointimal proliferation and in-stent stenosis.

CD34 affinity pheresis attenuates a surge among circulating progenitor cells following vascular injury

BACKGROUND Intimal hyperplasia (restenosis) is an exaggerated healing response leading to failure of half of vascular interventions. Increasing evidence suggests that circulating progenitor cells contribute to intimal pathology, and clinical studies have demonstrated a correlation between progenitor cells and the incidence of restenosis after cardiovascular interventions. The aims of this study were to characterize the temporal response of CD34+ progenitors following vascular injury in an ovine model and to evaluate an affinity pheresis approach to attenuate this response. METHODS An ovine model underwent either operative vascular injury or a nonvascular surgery (n = 3 per group). Blood was examined perioperatively over 2 weeks by flow cytometry. Next, an affinity pheresis approach to mediate systemic depletion of CD34 progenitors was designed. Custom agarose pheresis matrix with antibody affinity toward CD34 or an isotype control was evaluated in vitro. Next, following vascular injury, sheep underwent perioperative whole blood volume pheresis toward either the progenitor cell marker CD34 (n = 3) or an isotype control (n = 4) for 14 days. Animals were monitored by physical exam as well as complete blood counts. Cells recovered by pheresis were eluted and examined by flow cytometry. RESULTS Flow cytometry revealed a focal surge of circulating CD34 cells after vascular injury but not among surgical controls (P = .05). Toward the goal of an approach to attenuate the surge of CD34 progenitors, an evaluation of high-flow affinity matrix revealed efficacy in removal of progenitors from ovine blood in vitro. Next, a separate group of animals undergoing affinity pheresis after vascular injury was evaluated to mediate systemic depletion of CD34+ cells. Again, a surge of CD34+ cells was observed among isotype pheresis animals following vascular intervention but was attenuated over 20-fold by a CD34 pheresis approach (P = .029). Furthermore, an average of 77 million CD34-positive cells were eluted from the CD34 pheresis matrix. Despite multiple sessions of pheresis, complete blood counts remained essentially unchanged over 2 weeks. CONCLUSIONS Despite evidence suggesting a role for CD34+ circulating progenitor cells in restenotic pathology, the temporal pattern of CD34 progenitors after vascular injury has not been previously defined. We have demonstrated a surge among circulating CD34+ cells that appears confined to procedures involving vascular injury and that this event seems to occur early after vascular injury. We further conclude that CD34 affinity pheresis attenuates the surge. This approach for direct depletion of progenitors may have important implications for the study of progenitors in vascular restenosis.

Advances in Materials for Recent Low-Profile Implantable Bioelectronics

The rapid development of micro/nanofabrication technologies to engineer a variety of materials has enabled new types of bioelectronics for health monitoring and disease diagnostics. In this review, we summarize widely used electronic materials in recent low-profile implantable systems, including traditional metals and semiconductors, soft polymers, biodegradable metals, and organic materials. Silicon-based compounds have represented the traditional materials in medical devices, due to the fully established fabrication processes. Examples include miniaturized sensors for monitoring intraocular pressure and blood pressure, which are designed in an ultra-thin diaphragm to react with the applied pressure. These sensors are integrated into rigid circuits and multiple modules; this brings challenges regarding the fundamental material’s property mismatch with the targeted human tissues, which are intrinsically soft. Therefore, many polymeric materials have been investigated for hybrid integration with well-characterized functional materials such as silicon membranes and metal interconnects, which enable soft implantable bioelectronics. The most recent trend in implantable systems uses transient materials that naturally dissolve in body fluid after a programmed lifetime. Such biodegradable metallic materials are advantageous in the design of electronics due to their proven electrical properties. Collectively, this review delivers the development history of materials in implantable devices, while introducing new bioelectronics based on bioresorbable materials with multiple functionalities.

A novel compartmentalised stent graft to isolate the perfusion of the abdominal organs.

Abstract Donation after cardiac death has been adopted to address the critical shortage of donor organs for transplant. Recovery of these organs is hindered by low blood flow that leads to permanent organ injury. We propose a novel approach to isolate the perfusion of the abdominal organs from the systemic malperfusion of the dying donor. We reasoned that this design could improve blood flow to organs without open surgery, while respecting the ethical principle that cardiac stress not be increased during organ recovery. Conditions within the stent were analysed using a computational fluid dynamics (CFD) method and validated on two prototypes in vitro. The hydrodynamic pressure drop across the stent was measured as 0.14–0.22 mmHg, which is a negligible influence. Device placement studies were also conducted on swine model fluoroscopically. All these results demonstrated the feasibility of rapidly isolating the perfusion to abdominal organs using a compartmentalised stent graft design.