Burçe Ataç Mogol

Model studies on the role of 5-hydroxymethyl-2-furfural in acrylamide formation from asparagine.

This study aimed to investigate the mechanism of acrylamide formation during heating asparagine (ASN) at elevated temperatures with glucose (GLC), and 5-hydroxymethyl-2-furfural (HMF). The results revealed that HMF rapidly reacted with ASN, leading to acrylamide formation. The ASN-HMF model system generated acrylamide more efficiently than the ASN-GLC model system during heating at 180°C. A significantly higher amount of 3-aminopropionamide (3-APA) was formed in the ASN-HMF model system than in the ASN-GLC model system within 5min at 180°C. The amount of 3-APA decreased after 5min of heating in both model systems while the amount of acrylamide continued to increase in the ASN-HMF model system. In-depth high resolution mass spectrometry analyses of reaction products formed in the model systems together with the kinetic data suggested that HMF is a potent carbonyl accelerating acrylamide formation during heating. 3-APA was found as one of the key intermediates leading to acrylamide formation.

Controlling the Maillard Reaction by Reactant Encapsulation: Sodium Chloride in Cookies

Formation of Maillard reaction products (MRPs) including 5-hydroxymethylfurfural (HMF) and acrylamide has been an intensive area of research in recent decades. The presence of reactants such as sodium chloride may influence the Maillard reaction (MR) pathways through the dehydration of various key intermediates. The aim of this work was to test the potential of ingredient encapsulation to mitigate the MR by investigating the case of sodium chloride encapsulation on the HMF formation in cookies. Thirteen cookies were prepared with recipes containing free or encapsulated NaCl. Increasing NaCl concentration from 0 to 0.65% increases HMF concentration up to 75%, whereas in the presence of encapsulated NaCl the reduction of HMF varied from 18 to 61% due to the inhibition of sucrose pyrolytic decomposition and the fructofuranosyl cation formation. Data demonstrated that the more heat-resistant the lipid-based coating was, the more pronounced the reduction of HMF formation. The results showed that encapsulation represents a useful approach to prevent the formation of potentially harmful compounds in thermally processed foods.

Compositional, nutritional, and functional characteristics of instant teas produced from low- and high-quality black teas.

Two types of instant teas produced from low- and high-quality black teas were examined for their proximate composition, dietary fiber, minerals, water-soluble vitamins, total phenolic content, various antioxidant assays, phenolics (flavanols, condensed phenolics, and phenolic acids), alkaloids, and carotenoids as well as taste-active compounds (sugars, organic acids, and free amino acids). Some variations, albeit to different extents, were observed (p < 0.05) among these parameters between instant teas produced from low- and high-quality black teas. With respect to proximate composition, carbohydrate was the predominant component (56.68-59.84 g/100 g), followed by protein (19.31-19.86 g/100 g). Ash, moisture, and, to a lesser extent, dietary fiber and fat were also present in both instant teas. Thirteen minerals, four water-soluble vitamins, six flavanols, two alkaloids, three condensed phenolics, one phenolic acid, and one carotenoid were identified. Total phenolic content varied between 17.35 and 17.82 g of gallic acid equivalents (GAE)/100 g instant tea. With regard to antioxidant activities, three different assays such as oxygen radical absorbance capacity (ORAC), trolox equivalent antioxidant capacity (TEAC), and cupric ion reducing antioxidant capacity (CUPRAC) were measured. No significant differences (p > 0.05) in total phenolic, ORAC, TEAC, and CUPRAC contents between low- and high-quality instant teas were observed. With regard to taste-active compounds, 3 sugars, 5 organic acids, and 18 free amino acids were positively identified, of which fructose, tannic acid, and theanine predominated, respectively. The present work suggests that despite some differences, instant teas produced from low- and high-quality black teas should not be distinguished on the basis of their compositional, nutritional, and functional characteristics as well as taste-active compounds.

Effects of extrusion, infrared and microwave processing on Maillard reaction products and phenolic compounds in soybean

BACKGROUND The Maillard reaction indicators furosine, hydroxymethylfurfural (HMF), acrylamide and color were determined to evaluate heat effects induced during extrusion, infrared and microwave heating of soybean. In addition, the present paper aimed to study changes in the phenolic compounds, as well as in the overall antioxidant properties of different soybean products in relation to heating at 45-140 °C during the processes. RESULTS Soybean proteins were highly sensible to Maillard reaction and furosine was rapidly formed under slight heating conditions during extrusion and infrared heating. Microwave heating at lower temperatures for a longer time yielded lower acrylamide levels in the final soybean products, as a result of its partial degradation. However, during infrared heating, acrylamide formation greatly increased with decreasing moisture content. After a short time of extrusion and infrared heating at 140 °C and microwave heating at 135 °C for 5 min, concentrations of HMF increased to 11.34, 26.21 and 34.97 µg g(-1), respectively. CONCLUSION The heating conditions caused formation of acrylamide, HMF and furosine in high concentration. The results indicate that the complex structure of soybeans provides protection of phenolic compounds from thermal degradation, and that Maillard reaction products improved the antioxidant properties of heat-treated soybean.

Nutritional and functional characteristics of seven grades of black tea produced in Turkey.

Seven grades of black tea [high-quality black tea (grades 1-3) and low-quality black tea (grades 4-7)], processed by ÇAYKUR Tea Processing Plant (Rize, Turkey), were examined for their proximate composition, dietary fiber, minerals, and water-soluble vitamins as well as total phenolic content, various antioxidant assays, phenolics (flavanols, alkoloids, condensed phenolics, and phenolic acids), chlorophylls, and carotenoids. Some variations, albeit to different extents, were observed (p < 0.05) among these parameters in seven grades of black tea. With respect to proximate composition, dietary fiber was the predominant compound (ranging from 49.68 to 54.31 g/100 g), followed by protein, carbohydrate, and, to a lesser extent, ash, moisture, and fat. Thirteen minerals, four water-soluble vitamins, six flavanols, two alkoloids, three condensed phenolics, one phenolic acid, two chlorophylls, and two carotenoids were identified in the seven grades of black tea. Total phenol content ranged from 7.52 to 8.29 g of gallic acid equivalents (GAE)/100 g, being lowest in grade 6 and highest in grade 1. With regard to antioxidant activities, a large variation in oxygen radical absorbance capacity (ORAC) values was observed among all grades of black tea (ranging from 777 μmol of trolox equivalents (TE)/g in grade 7 to 1210 μmol of TE/g in grade 3). The present work suggests that high- and low-quality black teas should not be distinguished on the basis of their nutritional and functional characteristics. The combination of nutritional compounds together with functional characteristics renders combination effects that provide the characteristic quality of each grade of black tea.

Computer vision‐based analysis of foods: A non‐destructive colour measurement tool to monitor quality and safety

Computer vision-based image analysis has been widely used in food industry to monitor food quality. It allows low-cost and non-contact measurements of colour to be performed. In this paper, two computer vision-based image analysis approaches are discussed to extract mean colour or featured colour information from the digital images of foods. These types of information may be of particular importance as colour indicates certain chemical changes or physical properties in foods. As exemplified here, the mean CIE a* value or browning ratio determined by means of computer vision-based image analysis algorithms can be correlated with acrylamide content of potato chips or cookies. Or, porosity index as an important physical property of breadcrumb can be calculated easily. In this respect, computer vision-based image analysis provides a useful tool for automatic inspection of food products in a manufacturing line, and it can be actively involved in the decision-making process where rapid quality/safety evaluation is needed.

Inhibition of enzymatic browning in actual food systems by the Maillard reaction products

BACKGROUND The Maillard reaction occurring between amino acids and sugars produces neo-formed compounds having certain levels of antioxidant activity depending on the reaction conditions and the type of reactants. The objective of this study was to investigate enzymatic browning inhibition capacity of Maillard reaction products (MRPs) formed from different amino acids including arginine (Arg), histidine (His), lysine (Lys) and proline (Pro). RESULTS The inhibitory effects of the MRPs on polyphenol oxidase (PPO) were determined. The total antioxidant capacity (TAC) of MRPs derived from different amino acids were in the order Arg > His > Lys > Pro. The TAC and PPO inhibition of MRPs were evaluated as a function of temperature (80-120 °C), time (1-6 h) and pH (2-12). Arg-Glc and His-Glc MRPs exhibited strong TAC and PPO inhibition. Increasing temperature (up to 100 °C) and time also increased TAC and PPO inhibition. Kinetics analysis indicated a mixed type inhibition of PPO by MRPs. CONCLUSION The results indicate that the MRPs derived from Arg and His under certain reaction conditions significantly prevent enzymatic browning in actual food systems. The intermediate compounds capable of preventing enzymatic browning are reductones and dehydroreductones, as confirmed by liquid chromatographic-mass spectrometric analyses.

Processing treatments for mitigating acrylamide formation in sweetpotato French fries.

Acrylamide formation in sweetpotato French fries (SPFF) is likely a potential health concern as there is an increasing demand for good-quality fries from carotene-rich sweetpotatoes (SP). This is the first report on acrylamide formation in SPFF as affected by processing methods. Acrylamide levels in SPFF from untreated SP strips fried at 165 °C for 2, 3, and 5 min were 124.9, 255.5, and 452.0 ng/g fresh weight, which were reduced by about 7 times to 16.3, 36.9, and 58.3 ng/g, respectively, when the strips were subjected to processing that included water blanching and soaking in 0.5% sodium acid pyrophosphate before frying. An additional step of strip soaking in 0.4% calcium chloride solution before par-frying increased the calcium content from 0.2 to 0.8 mg/g and decreased the acrylamide levels to 6.3, 17.6, and 35.4 ng/g, respectively. SPFF with acrylamide level of <100 ng/g or several times lower than that of white potato French fries can be obtained by integrating processing treatments commonly used in the food industry.

Degradation of 5-hydroxymethylfurfural during yeast fermentation.

5-Hydroxymethyl furfural (HMF) may occur in malt in high quantities depending on roasting conditions. However, the HMF content of different types of beers is relatively low, indicating its potential for degradation during fermentation. This study investigates the degradation kinetics of HMF in wort during fermentation by Saccharomyces cerevisiae. The results indicated that HMF decreased exponentially as fermentation progressed. The first-order degradation rate of HMF was 0.693 × 10−2 and 1.397 × 10–2 min−1 for wort and sweet wort, respectively, indicating that sugar enhances the activity of yeasts. In wort, HMF was converted into hydroxymethyl furfuryl alcohol by yeasts with a high yield (79–84% conversion). Glucose and fructose were utilised more rapidly by the yeasts in dark roasted malt than in pale malt (p < 0.05). The conversion of HMF into hydroxymethyl furfuryl alcohol seems to be a primary activity of yeast cells, and presence of sugars in the fermentation medium increases this activity.

Kinetics of Furan Formation from Ascorbic Acid during Heating under Reducing and Oxidizing Conditions

This study aimed to investigate the effect of oxidizing and reducing agents on the formation of furan through ascorbic acid (AA) degradation during heating at elevated temperatures (≥100 °C) under low moisture conditions. To obtain these conditions, oxidizing agent, ferric chloride (Fe), or reducing agent, cysteine (Cys), was added to reaction medium. Kinetic constants, estimated by multiresponse modeling, stated that adding Fe significantly increased furan formation rate constant, namely 369-fold higher than that of control model at 100 °C. Rate-limiting step of furan formation was found as the reversible reaction step between intermediate (Int) and diketogluconic acid (DKG). Additionally, Fe decreased activation energy of AA dehydration and furan formation steps by 28.6% and 60.9%, respectively. Results of this study are important for heated foods, fortified by ferric ions and vitamins, which targets specific consumers, e.g. infant formulations.