C. Beichman

The NASA Exoplanet Archive: Data and Tools for Exoplanet Research

ABSTRACT.We describe the contents and functionality of the NASA Exoplanet Archive, a database and toolset funded by NASA to support astronomers in the exoplanet community. The current content of the database includes interactive tables containing properties of all published exoplanets, Kepler planet candidates, threshold-crossing events, data validation reports and target stellar parameters, light curves from the Kepler and CoRoT missions and from several ground-based surveys, and spectra and radial velocity measurements from the literature. Tools provided to work with these data include a transit ephemeris predictor, both for single planets and for observing locations, light curve viewing and normalization utilities, and a periodogram and phased light curve service. The archive can be accessed at http://exoplanetarchive.ipac.caltech.edu.

The Dust and Gas Around β Pictoris

We have obtained Spitzer IRS 5.5-35 ?m spectroscopy of the debris disk around ? Pictoris. In addition to the 10 ?m silicate emission feature originally observed from the ground, we also detect the crystalline silicate emission bands at 28 and 33.5 ?m. This is the first time that the silicate bands at wavelengths longer than 10 ?m have ever been seen in the ? Pictoris disk. The observed dust emission is well reproduced by a dust model consisting of fluffy cometary and crystalline olivine aggregates. We searched for line emission from molecular hydrogen and atomic [S I], Fe II, and Si II gas but detected none. We place a 3 ? upper limit of <17 M? on the H2 S(1) gas mass, assuming an excitation temperature of Tex = 100 K. This suggests that there is less gas in this system than is required to form the envelope of Jupiter. We hypothesize that some of the atomic Na I gas observed in Keplerian rotation around ? Pictoris may be produced by photon-stimulated desorption from circumstellar dust grains.

FU Orionis Resolved by Infrared Long-Baseline Interferometry at a 2 AU Scale

We present the first infrared interferometric observations of a young stellar object with a spatial projected resolution better than 2 AU. The observations were obtained with the Palomar Testbed Interferometer (PTI). FU Orionis exhibits a visibility of V2=0.72 ± 0.07 for a 103 ± 5 m-projected baseline at λ=2.2 μm. On the spatial scale probed by the PTI, the data are consistent with both a binary system scenario (a maximum magnitude difference of 2.7 ± 0.5 mag and the smallest separation of 0.35 ± 0.05 AU) and a standard luminous accretion disk model ( ~6 × 10−5 M☉ yr-1), where the thermal emission dominates the stellar scattering, and are inconsistent with a single stellar photosphere.

Starspot Jitter in Photometry, Astrometry, and Radial Velocity Measurements

Analytical relations are derived for the amplitude of astrometric, photometric, and radial velocity (RV) perturbations caused by a single rotating spot. The relative power of the starspot jitter is estimated and compared with the available data for κ^1 Ceti and HD 166435, as well as with numerical simulations for κ^1 Ceti and the Sun. A Sun-like star inclined at i = 90° at 10 pc is predicted to have an rms jitter of 0.087 μas in its astrometric position along the equator, and 0.38 m s^(–1) in radial velocities. If the presence of spots due to stellar activity is the ultimate limiting factor for planet detection, the sensitivity of SIM Lite to Earth-like planets in habitable zones is about an order of magnitude higher than the sensitivity of prospective ultra-precise RV observations of nearby stars.

Demonstration of a near-IR line-referenced electro-optical laser frequency comb for precision radial velocity measurements in astronomy

An important technique for discovering and characterizing planets beyond our solar system relies upon measurement of weak Doppler shifts in the spectra of host stars induced by the influence of orbiting planets. A recent advance has been the introduction of optical frequency combs as frequency references. Frequency combs produce a series of equally spaced reference frequencies and they offer extreme accuracy and spectral grasp that can potentially revolutionize exoplanet detection. Here we demonstrate a laser frequency comb using an alternate comb generation method based on electro-optical modulation, with the comb centre wavelength stabilized to a molecular or atomic reference. In contrast to mode-locked combs, the line spacing is readily resolvable using typical astronomical grating spectrographs. Built using commercial off-the-shelf components, the instrument is relatively simple and reliable. Proof of concept experiments operated at near-infrared wavelengths were carried out at the NASA Infrared Telescope Facility and the Keck-II telescope.We describe a successful effort to produce a laser comb around 1.55 μm in the astronomical H band (1.5-1.8 μm) using a method based on a line-referenced, electrooptical-modulation frequency comb (LR-EOFC). We discuss the experimental setup, laboratory results and proof of concept demonstrations at the NASA Infrared Telescope Facility (IRTF) and the Keck-II telescope. The laser comb has a demonstrated stability of < 200 kHz, corresponding to a Doppler precision of ∼ 0.3 m s−1. This technology, when coupled with a high spectral resolution spectrograph, offers the promise of ∼ 1 m s−1 radial velocity precision suitable for the detection of Earth-sized planets in the habitable zones of cool M-type stars. ar X iv :1 50 1. 02 50 9v 1 [ as tr oph .I M ] 1 1 Ja n 20 15

Detectability of Earth-like Planets in Multi-Planet Systems: Preliminary Report

We ask if Earth-like planets (terrestrial mass and habitable-zone orbit) can be detected in multi-planet systems, using astrometric and radial velocity observations. We report here the preliminary results of double-blind calculations designed to answer this question.

Gattini: a multisite campaign for the measurement of sky brightness in Antarctica

We present the Gattini project: a multisite campaign to measure the optical sky properties above the two high altitude Antarctic astronomical sites of Dome C and Dome A. The Gattini-DomeC project, part of the IRAIT site testing campaign and ongoing since January 2006, consists of two cameras for the measurement of optical sky brightness, large area cloud cover and auroral detection above the DomeC site, home of the French-Italian Concordia station. The cameras are transit in nature and are virtually identical except for the nature of the lenses. The cameras have operated successfully throughout the past two Antarctic winter seasons and here we present the first results obtained from the returned 2006 dataset. The Gattini-DomeA project will place a similar site testing facility at the highest point on the Antarctic plateau, Dome A, with observations commencing in 2008. The project forms a small part of a much larger venture coordinated by the Polar Research Institute of China as part of the International Polar Year whereby an automated site testing facility called PLATO will be traversed into the DomeA site. The status of this exciting and ambitious project with regards to the Gattini-DomeA cameras will be presented.

Design and Construction of Absorption Cells for Precision Radial Velocities in the K Band Using Methane Isotopologues

We present a method to optimize absorption cells for precise wavelength calibration in the near-infrared. We apply it to design and optimize methane isotopologue cells for precision radial velocity measurements in the K band. We also describe the construction and installation of two such cells for the CSHELL spectrograph at NASA’s IRTF. We have obtained their high-resolution laboratory spectra, which we can then use in precision radial velocity measurements and which can also have other applications. In terms of obtainable RV precision, methane should outperform other proposed cells, such as the ammonia cell (^(14)NH_3) recently demonstrated on CRIRES/VLT. The laboratory spectra of the ammonia and methane cells show strong absorption features in the H band that could also be exploited for precision Doppler measurements. We present spectra and preliminary radial velocity measurements obtained during our first-light run. These initial results show that a precision down to 20-30 m s^(-1)can be obtained using a wavelength interval of only 5 nm in the K band and S/N ∼ 150. This supports the prediction that a precision down to a few meters per second can be achieved on late-M dwarfs using the new generation of NIR spectrographs, thus enabling the detection of terrestrial planets in their habitable zones. Doppler measurements in the NIR can also be used to mitigate the radial velocity jitter due to stellar activity, enabling more efficient surveys on young active stars.

A High-Precision Near-Infrared Survey for Radial Velocity Variable Low-Mass Stars Using Cshell and a Methane Gas Cell

We present the results of a precise near-infrared (NIR) radial velocity (RV) survey of 32 low-mass stars with spectral types K2-M4 using CSHELL at the NASA InfraRed Telescope Facility in the K band with an isotopologue methane gas cell to achieve wavelength calibration and a novel, iterative RV extraction method. We surveyed 14 members of young (≈25-150 Myr) moving groups, the young field star ϵ Eridani, and 18 nearby (<25 pc) low-mass stars and achieved typical single-measurement precisions of 8-15 m s-1with a long-term stability of 15-50 m s-1 over longer baselines. We obtain the best NIR RV constraints to date on 27 targets in our sample, 19 of which were never followed by high-precision RV surveys. Our results indicate that very active stars can display long-term RV variations as low as ∼25-50 m s-1 at ≈2.3125 μm, thus constraining the effect of jitter at these wavelengths. We provide the first multiwavelength confirmation of GJ 876 bc and independently retrieve orbital parameters consistent with previous studies. We recovered RV variabilities for HD 160934 AB and GJ 725 AB that are consistent with their known binary orbits, and nine other targets are candidate RV variables with a statistical significance of 3σ-5σ. Our method, combined with the new iSHELL spectrograph, will yield long-term RV precisions of ≲5 m s-1 in the NIR, which will allow the detection of super-Earths near the habitable zone of mid-M dwarfs.

Enhancement of the Spitzer Infrared Array Camera (IRAC) distortion correction for parallax measurements

The Spitzer Space Telescope Infrared Array (IRAC) offers a rare opportunity to measure distances and determine physical properties of the faintest and coldest brown dwarfs. The current distortion correction is a 3rd order polynomial represented by TAN-SIP parameters within the headers. The current correction, good to 100 mas, was derived from deep imaging, using marginally resolved galaxies in some cases, and has remained stable throughout both the cryogenic and warm mission. Using recent Spitzer calibration observations mapped to HST/ACS calibration observations of 47 Tuc with an absolute accuracy good to 1 mas, we are working towards a possible 5th order polynomial correction that theoretically could allow measurements to within 20 mas. Extensive testing, using observations of 47 Tuc, NGC 6791 and NGC 2264, are underway, after which the new parameters will be used to update all the 3.6 and 4.5um data taken within warm and cryogenic missions. We anticipate if achievable, this new accuracy could be combined with other ongoing enhancements (Ingalls et al, 9143-52) that will permit measurements of parallaxes out to about 50 pc, increasing the volume surveyed by a factor of 100, and enabling new capabilities such as luminosity measurements of the population of young brown dwarfs in the beta Pictoris moving group.