C. Fabricius

Gaia Data Release 1 - Astrometry: one billion positions, two million proper motions and parallaxes

Gaia Data Release 1 (Gaia DR1) contains astrometric results for more than 1 billion stars brighter than magnitude 20.7 based on observations collected by the Gaia satellite during the first 14 months of its operational phase. We give a brief overview of the astrometric content of the data release and of the model assumptions, data processing, and validation of the results. For stars in common with the Hipparcos and Tycho-2 catalogues, complete astrometric single-star solutions are obtained by incorporating positional information from the earlier catalogues. For other stars only their positions are obtained by neglecting their proper motions and parallaxes. The results are validated by an analysis of the residuals, through special validation runs, and by comparison with external data. Results. For about two million of the brighter stars (down to magnitude ~11.5) we obtain positions, parallaxes, and proper motions to Hipparcos-type precision or better. For these stars, systematic errors depending e.g. on position and colour are at a level of 0.3 milliarcsecond (mas). For the remaining stars we obtain positions at epoch J2015.0 accurate to ~10 mas. Positions and proper motions are given in a reference frame that is aligned with the International Celestial Reference Frame (ICRF) to better than 0.1 mas at epoch J2015.0, and non-rotating with respect to ICRF to within 0.03 mas/yr. The Hipparcos reference frame is found to rotate with respect to the Gaia DR1 frame at a rate of 0.24 mas/yr. Based on less than a quarter of the nominal mission length and on very provisional and incomplete calibrations, the quality and completeness of the astrometric data in Gaia DR1 are far from what is expected for the final mission products. The results nevertheless represent a huge improvement in the available fundamental stellar data and practical definition of the optical reference frame.

Gaia broad band photometry

The scientific community needs to be prepared to analyse the data from Gaia, one of the most ambitious ESA space missions, to be launched in 2012. The purpose of this paper is to provide data and tools in order to predict in advance how Gaia photometry is expected to be. To do so, we provide relationships among colours involving Gaia magnitudes and colours from other commonly used photometric systems (Johnson-Cousins, SDSS, Hipparcos and Tycho). The most up-to-date information from industrial partners has been used to define the nominal passbands and based on the BaSeL3.1 stellar spectral energy distribution library, relationships were obtained for stars with different reddening values, ranges of temperatures, surface gravities and metallicities. The transformations involving Gaia and Johnson-Cousins V-I_C and Sloan DSS g-z colours have the lowest residuals. A polynomial expression for the relation between the effective temperature and the colour G_BP-G_RP was derived for stars with T > 4500 K. Transformations involving two Johnson or two Sloan DSS colours yield lower residuals than using only one colour. We also computed several ratios of total-to-selective absorption including absorption A_G in the G band and colour excess E(G_BP-G_RP) for our sample stars. A relationship, involving A_G/A_V and the intrinsic (V-I_C) colour, is provided. The derived Gaia passbands have been used to compute tracks and isochrones using the Padova and BASTI models. Finally, the performances of the predicted Gaia magnitudes have been estimated according to the magnitude and the celestial coordinates of the star. The provided dependencies among colours can be used for planning scientific exploitation of Gaia data, performing simulations of the Gaia-like sky, planning ground-based complementary observations and for building catalogues with auxiliary data for the Gaia data processing and validation.

Gaia Data Release 2 - The astrometric solution

Context. Gaia Data Release 2 (Gaia DR2) contains results for 1693 million sources in the magnitude range 3 to 21 based on observations collected by the European Space Agency Gaia satellite during the first 22 months of its operational phase. nAims. We describe the input data, models, and processing used for the astrometric content of Gaia DR2, and the validation of these resultsperformed within the astrometry task. nMethods. Some 320 billion centroid positions from the pre-processed astrometric CCD observations were used to estimate the five astrometric parameters (positions, parallaxes, and proper motions) for 1332 million sources, and approximate positions at the reference epoch J2015.5 for an additional 361 million mostly faint sources. These data were calculated in two steps. First, the satellite attitude and the astrometric calibration parameters of the CCDs were obtained in an astrometric global iterative solution for 16 million selected sources, using about 1% of the input data. This primary solution was tied to the extragalactic International Celestial Reference System (ICRS) by means of quasars. The resulting attitude and calibration were then used to calculate the astrometric parameters of all the sources. Special validation solutions were used to characterise the random and systematic errors in parallax and proper motion. nResults. For the sources with five-parameter astrometric solutions, the median uncertainty in parallax and position at the reference epoch J2015.5 is about 0.04 mas for bright (G < 14 mag) sources, 0.1 mas at G = 17 mag, and 0.7 masat G = 20 mag. In the proper motion components the corresponding uncertainties are 0.05, 0.2, and 1.2 mas yr−1, respectively.The optical reference frame defined by Gaia DR2 is aligned with ICRS and is non-rotating with respect to the quasars to within 0.15 mas yr−1. From the quasars and validation solutions we estimate that systematics in the parallaxes depending on position, magnitude, and colour are generally below 0.1 mas, but the parallaxes are on the whole too small by about 0.03 mas. Significant spatial correlations of up to 0.04 mas in parallax and 0.07 mas yr−1 in proper motion are seen on small (< 1 deg) and intermediate (20 deg) angular scales. Important statistics and information for the users of the Gaia DR2 astrometry are given in the appendices.

Gaia Data Release 1 - Catalogue validation

Before the publication of the Gaia Catalogue, the contents of the first data release have undergone multiple dedicated validation tests. These tests aim at analysing in-depth the Catalogue content to detect anomalies, individual problems in specific objects or in overall statistical properties, either to filter them before the public release, or to describe the different caveats of the release for an optimal exploitation of the data. Dedicated methods using either Gaia internal data, external catalogues or models have been developed for the validation processes. They are testing normal stars as well as various populations like open or globular clusters, double stars, variable stars, quasars. Properties of coverage, accuracy and precision of the data are provided by the numerous tests presented here and jointly analysed to assess the data release content. This independent validation confirms the quality of the published data, Gaia DR1 being the most precise all-sky astrometric and photometric catalogue to-date. However, several limitations in terms of completeness, astrometric and photometric quality are identified and described. Figures describing the relevant properties of the release are shown and the testing activities carried out validating the user interfaces are also described. A particular emphasis is made on the statistical use of the data in scientific exploitation.

Gaia Data Release 1: Pre-processing and source list creation

Context. The first data release from the Gaia mission contains accurate positions and magnitudes for more than a billion sources, and proper motions and parallaxes for the majority of the 2.5 million HIPPARCOS and Tycho-2 stars. nAims. We describe three essential elements of the initial data treatment leading to this catalogue: the image analysis, the construction of a source list, and the near real-time monitoring of the payload health. We also discuss some weak points that set limitations for the attainable precision at the present stage of the mission. nMethods. Image parameters for point sources are derived from one-dimensional scans, using a maximum likelihood method, under the assumption of a line spread function constant in time, and a complete modelling of bias and background. These conditions are, however, not completely fulfilled. The Gaia source list is built starting from a large ground-based catalogue, but even so a significant number of new entries have been added, and a large number have been removed. The autonomous onboard star image detection will pick up many spurious images, especially around bright sources, and such unwanted detections must be identified. Another key step of the source list creation consists in arranging the more than 10^(10) individual detections in spatially isolated groups that can be analysed individually. nResults. Complete software systems have been built for the Gaia initial data treatment, that manage approximately 50 million focal plane transits daily, giving transit times and fluxes for 500 million individual CCD images to the astrometric and photometric processing chains. The software also carries out a successful and detailed daily monitoring of Gaia health.

Gaia Data Release 2: Catalogue validation

Context. The second Gaia data release (DR2) contains very precise astrometric and photometric properties for more than one billion sources, astrophysical parameters for dozens of millions, radial velocities for millions, variability information for half a million stars from selected variability classes, and orbits for thousands of solar system objects. nAims: Before the catalogue was published, these data have undergone dedicated validation processes. The goal of this paper is to describe the validation results in terms of completeness, accuracy, and precision of the various Gaia DR2 data. nMethods: The validation processes include a systematic analysis of the catalogue content to detect anomalies, either individual errors or statistical properties, using statistical analysis and comparisons to external data or to models. nResults: Although the astrometric, photometric, and spectroscopic data are of unprecedented quality and quantity, it is shown that the data cannot be used without dedicated attention to the limitations described here, in the catalogue documentation and in accompanying papers. We place special emphasis on the caveats for the statistical use of the data in scientific exploitation. In particular, we discuss the quality filters and the consideration of the properties, systematics, and uncertainties from astrometry to astrophysical parameters, together with the various selection functions.

Gaia Data Release 1 - The photometric data

Context. This paper presents an overview of the photometric data that are part of the first Gaia data release. Aims. The principles of the processing and the main characteristics of the Gaia photometric data are presented. Methods. The calibration strategy is outlined briefly and the main properties of the resulting photometry are presented. Results. Relations with other broadband photometric systems are provided. The overall precision for the Gaia photometry is shown to be at the milli-magnitude level and has a clear potential to improve further in future releases.

Gaia Data Release 1 - Principles of the photometric calibration of the G band

Context. Gaia is an ESA cornerstone mission launched on 19 December 2013 aiming to obtain the most complete and precise 3D map of our Galaxy by observing more than one billion sources. This paper is part of a series of documents explaining the data processing and its results for Gaia Data Release 1, focussing on the G band photometry. Aims. This paper describes the calibration model of the Gaia photometric passband for Gaia Data Release 1. Methods. The overall principle of splitting the process into internal and external calibrations is outlined. In the internal calibration, a self-consistent photometric system is generated. Then, the external calibration provides the link to the absolute photometric flux scales. Results. The Gaia photometric calibration pipeline explained here was applied to the first data release with good results. Details are given of the various calibration elements including the mathematical formulation of the models used and of the extraction and preparation of the required input parameters (e.g. colour terms). The external calibration in this first release provides the absolute zero point and photometric transformations from the Gaia G passband to other common photometric systems. Conclusions. This paper describes the photometric calibration implemented for the first Gaia data release and the instrumental effects taken into account. For this first release no aperture losses, radiation damage, and other second-order effects have not yet been implemented in the calibration.

Gaia Data Release 2. Photometric content and validation

This work presents results from the European Space Agency n(ESA) space mission Gaia. Gaia data are being processed by the Gaia Data Processing and Analysis Consortium (DPAC). Funding for the DPAC is provided nby national institutions, in particular the institutions participating in the Gaia nMultiLateral Agreement (MLA). The Gaia mission website is https://www.cosmos.esa.int/gaia. The Gaia Archive website is http://gea.esac.esa.int/archive/. This work has been supported by the United Kingdom nRutherford Appleton Laboratory, the United Kingdom Science and Technology Facilities Council (STFC) through grant ST/L006553/1, and the United nKingdom Space Agency (UKSA) through grant ST/N000641/1. This work was nsupported by the MINECO (Spanish Ministry of Economy) through grant nESP2016-80079-C2-1-R (MINECO/FEDER, UE) and ESP2014-55996-C2-1-R n(MINECO/FEDER, UE) and MDM-2014-0369 of ICCUB (Unidad de Excelencia “Maria de Maeztu”). This work was supported by the Italian funding agencies nAgenzia Spaziale Italiana (ASI) through grants I/037/08/0, I/058/10/0, 2014-025- nR.0, and 2014- 025-R.1.2015 to INAF and contracts I/008/10/0 and 2013/030/I.0 nto ALTEC S.p.A and Istituto Nazionale di Astrofisica (INAF). This research has nmade use of the APASS database, located at the AAVSO web site. Funding for nAPASS has been provided by the Robert Martin Ayers Sciences Fund. We thank nA. Vallenari for supplying us with spectra for the validation of the external flux ncalibration and passband determination

The design and performance of the Gaia photometric system

The European Gaia astrometry mission is due for launch in 2011. Gaia will rely on the proven principles of the ESA Hipparcos mission to create an all-sky survey of about one billion stars throughout our Galaxy and beyond, by observing all objects down to 20 mag. Through its massive measurement of stellar distances, motions and multicolour photometry, it will provide fundamental data necessary for unravelling the structure, formation and evolution of the Galaxy. This paper presents the design and performance of the broad- and medium-band set of photometric filters adopted as the baseline for Gaia. The 19 selected passbands (extending from the UV to the far-red), the criteria and the methodology on which this choice has been based are discussed in detail. We analyse the photometric capabilities for characterizing the luminosity, temperature, gravity and chemical composition of stars. We also discuss the automatic determination of these physical parameters for the large number of observations involved, for objects located throughout the entire Hertzsprung-Russell diagram. Finally, the capability of the photometric system (PS) to deal with the main Gaia science case is outlined.