C. J. Eyles

Heliospheric Images of the Solar Wind at Earth

During relatively quiet solar conditions throughout the spring and summer of 2007, the SECCHI HI2 white-light telescope on the STEREO B solar-orbiting spacecraft observed a succession of wave fronts sweeping past Earth. We have compared these heliospheric images with in situ plasma and magnetic field measurements obtained by near-Earth spacecraft, and we have found a near perfect association between the occurrence of these waves and the arrival of density enhancements at the leading edges of high-speed solar wind streams. Virtually all of the strong corotating interaction regions are accompanied by large-scale waves, and the low-density regions between them lack such waves. Because the Sun was dominated by long-lived coronal holes and recurrent solar wind streams during this interval, there is little doubt that we have been observing the compression regions that are formed at low latitude as solar rotation causes the high-speed wind from coronal holes to run into lower speed wind ahead of it.

XIPE: the X-ray imaging polarimetry explorer

Abstract X-ray polarimetry, sometimes alone, and sometimes coupled to spectral and temporal variability measurements and to imaging, allows a wealth of physical phenomena in astrophysics to be studied. X-ray polarimetry investigates the acceleration process, for example, including those typical of magnetic reconnection in solar flares, but also emission in the strong magnetic fields of neutron stars and white dwarfs. It detects scattering in asymmetric structures such as accretion disks and columns, and in the so-called molecular torus and ionization cones. In addition, it allows fundamental physics in regimes of gravity and of magnetic field intensity not accessible to experiments on the Earth to be probed. Finally, models that describe fundamental interactions (e.g. quantum gravity and the extension of the Standard Model) can be tested. We describe in this paper the X-ray Imaging Polarimetry Explorer (XIPE), proposed in June 2012 to the first ESA call for a small mission with a launch in 2017. The proposal was, unfortunately, not selected. To be compliant with this schedule, we designed the payload mostly with existing items. The XIPE proposal takes advantage of the completed phase A of POLARIX for an ASI small mission program that was cancelled, but is different in many aspects: the detectors, the presence of a solar flare polarimeter and photometer and the use of a light platform derived by a mass production for a cluster of satellites. XIPE is composed of two out of the three existing JET-X telescopes with two Gas Pixel Detectors (GPD) filled with a He-DME mixture at their focus. Two additional GPDs filled with a 3-bar Ar-DME mixture always face the Sun to detect polarization from solar flares. The Minimum Detectable Polarization of a 1 mCrab source reaches 14 % in the 2–10 keV band in 105 s for pointed observations, and 0.6 % for an X10 class solar flare in the 15–35 keV energy band. The imaging capability is 24 arcsec Half Energy Width (HEW) in a Field of View of 14.7 arcmin × 14.7 arcmin. The spectral resolution is 20 % at 6 keV and the time resolution is 8 μs. The imaging capabilities of the JET-X optics and of the GPD have been demonstrated by a recent calibration campaign at PANTER X-ray test facility of the Max-Planck-Institut für extraterrestrische Physik (MPE, Germany). XIPE takes advantage of a low-earth equatorial orbit with Malindi as down-link station and of a Mission Operation Center (MOC) at INPE (Brazil). The data policy is organized with a Core Program that comprises three months of Science Verification Phase and 25 % of net observing time in the following 2 years. A competitive Guest Observer program covers the remaining 75 % of the net observing time.

SECCHI observations of the Sun-s Garden-Hose Density spiral

The SECCHI HI2 white-light imagers on the STEREO A and B spacecraft show systematically different proper motions of material moving outward from the Sun in front of high-speed solar wind streams from coronal holes. As a group of ejections enters the eastern (A) field of view, the elements at the rear of the group appear to overrun the elements at the front. (This is a projection effect and does not mean that the different elements actually merge.) The opposite is true in the western (B) field; the elements at the front of the group appear to run away from the elements at the rear. Elongation/time maps show this effect as a characteristic grouping of the tracks of motion into convergent patterns in the east and divergent patterns in the west, consistent with ejections from a single longitude on the rotating Sun. Evidently, we are observing segments of the garden-hose spiral made visible when fast wind from a low-latitude coronal hole compresses blobs of streamer material being shed at the leading edge of the hole.

First View of the Extended Green-Line Emission Corona At Solar Activity Minimum Using the Lasco-C1 Coronagraph on Soho

The newly developed C1 coronagraph as part of the Large-Angle Spectroscopic Coronagraph (LASCO) on board the SOHO spacecraft has been operating since January 29, 1996. We present observations obtained in the first three months of operation. The green-line emission corona can be made visible throughout the instruments full field of view, i.e., from 1.1 R⊙ out to 3.2 R⊙ (measured from Sun center). Quantitative evaluations based on calibrations cannot yet be performed, but some basic signatures show up even now: (1) There are often bright and apparently closed loop systems centered at latitudes of 30° to 45° in both hemispheres. Their helmet-like extensions are bent towards the equatorial plane. Farther out, they merge into one large equatorial ‘streamer sheet’ clearly discernible out to 32 R⊙. (2) At mid latitudes a more diffuse pattern is usually visible, well separated from the high-latitude loops and with very pronounced variability. (3) All high-latitude structures remain stable on time scales of several days, and no signature of transient disruption of high-latitude streamers was observed in these early data. (4) Within the first 4 months of observation, only one single ‘fast’ feature was observed moving outward at a speed of 70 km s-1 close to the equator. Faster events may have escaped attention because of data gaps. (5) The centers of high-latitude loops are usually found at the positions of magnetic neutral lines in photospheric magnetograms. The large-scale streamer structure follows the magnetic pattern fairly precisely. Based on our observations we conclude that the shape and stability of the heliospheric current sheet at solar activity minimum are probably due to high-latitude streamers rather than to the near-equatorial activity belt.

A 512 512 CMOS Monolithic Active Pixel Sensor with integrated ADCs for space science

Abstract In the last few years, CMOS sensors have become widely used for consumer applications, but little has been done for scientific instruments. In this paper we present the design and experimental characterisation of a Monolithic Active Pixel Sensor (MAPS) intended for a space science application. The sensor incorporates a 525×525 array of pixels on a 25xa0μm pitch. Each pixel contains a detector together with three transistors that are used for pixel reset, pixel selection and charge-to-voltage conversion. The detector consists of four n-well/p-substrate diodes combining optimum charge collection and low noise performance. The array readout is column-parallel with adjustable gain column amplifiers and a 10-bit single slope ADC. Data conversion takes place simultaneously for all the 525 pixels in one row. The ADC slope can be adjusted in order to give the best dynamic range for a given brightness of a scene. The digitised data are output on a 10-bit bus at 3xa0MHz. An on-chip state machine generates all of the control signals needed for the readout. All of the bias currents and voltages are generated on chip by a DAC that is programmable through an I 2 C compatible interface. The sensor was designed and fabricated on a standard 0.5xa0μm CMOS technology. The overall die size is 16.7xa0mm×19.9xa0mm including the associated readout electronics and bond pads. Preliminary test results show that the full-scale design works well, meeting the Star Tracker requirements with less than 1-bit noise, good linearity and good optical performance.

First Direct Observation of the Interaction between a Comet and a Coronal Mass Ejection Leading to a Complete Plasma Tail Disconnection

This a discovery report of the first direct imaging of the interaction a comet with a coronal mass ejection (CME) in the inner heliosphere with high temporal and spatial resolution. The observations were obtained by the Sun-Earth Connection Coronal and Heliospheric Investigation (SECCHI) Heliospheric Imager-1 (HI-1) aboard the STEREO mission. They reveal the extent of the plasma tail of comet 2P/Encke to unprecedented lengths and allow us to examine the mechanism behind a spectacular tail disconnection event. Our preliminary analysis suggests that the disconnection is driven by magnetic reconnection between the magnetic field entrained in the CME and the interplanetary field draped around the comet and not by pressure effects. Further analysis is required before we can conclude whether the reconnection occurs on the day side or on the tail side of the comet. However, the observations offer strong support to the idea that large-scale tail disconnections are magnetic in origin. The online movie reveals a wealth of interactions between solar wind structures and the plasma tail beyond the collision with the CME. Future analyses of this data set should provide critical insights on the structure of the inner heliosphere.

Discovery of the atomic iron tail of comet McNaught using the Heliospheric Imager on STEREO

In 2007 January, at the heliocentric distance r < 0.3 AU, comet McNaught 2006P1 became the brightest comet since C/Ikeya-Seki 1965S1 and was continuously monitored by space-based solar observatories. We provide strong evidence that an archlike tail observed by the Heliospheric Imager aboard the STEREO spacecraft is the first ever detected tail composed of neutral Fe atoms. We obtain an Fe lifetime τ = (4.1 ± 0.4) × 104 s at r = 0.25 AU, in agreement with theoretical predictions of the photoionization lifetime. The expected dust temperature is inconsistent with iron sublimation, suggesting that Fe atoms are coming from troilite evaporation.

The Relationship of Green-Line Transients to White-Light Coronal Mass Ejections

We report observations by the Large Angle Spectrometric Coronagraph (LASCO) on the SOHO spacecraft of three coronal green-line transients that could be clearly associated with coronal mass ejections (CMEs) detected in Thomson-scattered white light. Two of these events, with speeds >25 km s-1, may be classified as ‘whip-lite’ transients. They are associated with the core of the white-light CMEs, identified with erupting prominence material, rather than with the leading edge of the CMEs. The third green-line transient has a markedly different appearance and is more gradual than the other two, with a projected outward speed < 10 km s-1 . This event corresponds to the leading edge of a’ streamer blowout’ type of CME. A dark void is left behind in the emission-line corona following each of the fast eruptions. Both fast emission-line transients start off as a loop structure rising up from close to the solar surface. We suggest that the driving mechanism for these events may be the emergence of new bipolar magnetic regions on the surface of the Sun, which destabilize the ambient corona and cause an eruption. The possible relationship of these events to recent X-ray observations of CMEs is briefly discussed.

Techniques for the analysis of data from coded-mask X-ray telescopes

Several techniques useful in the analysis of data from coded-mask telescopes are presented. Methods of handling changes in the instrument pointing direction are reviewed and ways of using FFT techniques to do the deconvolution considered. Emphasis is on techniques for optimally-coded systems, but it is shown that the range of systems included in this class can be extended through the new concept of ‘partial cycle averaging’.

The X-ray imager on AXO

DSRI has initiated a development program of CZT X-ray and gamma-ray detectors employing strip readout techniques. A dramatic improvement of the energy response was found operating the detectors as the so-called drift detectors. For the electronic readout, modern ASIC chips were investigated. Modular design and the low-power electronics will make large area detectors using the drift strip method feasible. The performance of a prototype CZT system will be presented and discussed. One such detector system has been proposed for future space missions: the X-Ray Imager (XRI) on the Atmospheric X-ray Observatory (AXO), which is a mission proposed to the Danish Small Satellite Program and is dedicated to observations of X-ray generating processes in the Earth’s atmosphere. Of special interest will be simultaneous optical and X-ray observations of sprites that are #ashes appearing directly above an active thunderstorm system. Additional objective is a detailed mapping of the auroral X-ray and optical emission. XRI comprises a coded mask and a 20]40 cm2 CZT detector array covering an energy range from 5 to 200 keV. ( 2001 Elsevier Science B.V. All rights reserved.