C. M. Dinnis

Interactions between iron, manganese, and the Al-Si eutectic in hypoeutectic Al-Si alloys

Sand-cast plates were used to determine the effect of iron and manganese concentrations on porosity levels in Al-9 pct Si-0.5 pct Mg alloys. Iron increased porosity levels. Manganese additions increased porosity levels in alloys with 0.1 pct Fe, but reduced porosity in alloys with 0.6 and 1 pct Fe. Thermal analysis and quenching were undertaken to determine the effect of iron and managanese on the solidification of the Al-Si eutectic. At high iron levels, the presence of large β-Al5FeSi was found to reduce the number of eutectic nucleation events and increase the eutectic grain size. The preferential formation of α-Al15Mn3Si2 upon addition of manganese reversed these effects. It is proposed that this interaction is due to β-Al5FeSi and the Al-Si eutectic having common nuclei. Porosity levels are proposed to be controlled by the eutectic grain size and the size of the iron-bearing intermetallic particles rather than the specific intermetallic phase that forms.