C. Martinez-Boubeta

Learning from Nature to Improve the Heat Generation of Iron-Oxide Nanoparticles for Magnetic Hyperthermia Applications

The performance of magnetic nanoparticles is intimately entwined with their structure, mean size and magnetic anisotropy. Besides, ensembles offer a unique way of engineering the magnetic response by modifying the strength of the dipolar interactions between particles. Here we report on an experimental and theoretical analysis of magnetic hyperthermia, a rapidly developing technique in medical research and oncology. Experimentally, we demonstrate that single-domain cubic iron oxide particles resembling bacterial magnetosomes have superior magnetic heating efficiency compared to spherical particles of similar sizes. Monte Carlo simulations at the atomic level corroborate the larger anisotropy of the cubic particles in comparison with the spherical ones, thus evidencing the beneficial role of surface anisotropy in the improved heating power. Moreover we establish a quantitative link between the particle assembling, the interactions and the heating properties. This knowledge opens new perspectives for improved hyperthermia, an alternative to conventional cancer therapies.

Influence of dipolar interactions on hyperthermia properties of ferromagnetic particles

We show both experimental evidences and Monte Carlo modeling of the effects of interparticle dipolar interactions on the hysteresis losses. Results indicate that an increase in the intensity of dipolar interactions produce a decrease in the magnetic susceptibility and hysteresis losses, thus diminishing the hyperthermia output. These findings may have important clinical implications for cancer treatment.

Self-assembled multifunctional Fe/MgO nanospheres for magnetic resonance imaging and hyperthermia

UNLABELLED A one-step process for the production of nanoparticles presenting advanced magnetic properties can be achieved using vapor condensation. In this article, we report on the fabrication of Fe particles covered by a uniform MgO epitaxial shell. MgO has a lower surface energy than Fe, which results in a core-shell crystal formation. The particles satisfy a few of technical requirements for the practical use in real clinics, such as a high biocompatibility in living cells in-vitro, an injection through blood vessels without any clothing problems in murine model, a high absorption rate for magnetic hyperthermia at small particle concentration, and the potential to be used as contrast agent in the field of diagnostic magnetic imaging. They are also able to be used in drug delivery and magnetic-activated cell sorting. FROM THE CLINICAL EDITOR In this paper, the authors report on the synthesis of Fe particles covered by a uniform MgO epitaxial shell resulting in a core-shell crystal formation. The particles are proven to be useful as contrast agents for magnetic resonance imaging and have the potential to be useful as heating mediators for cancer therapy through hyperthermia. They also might be used in drug delivery and magnetic-activated cell sorting.

Tetravalent manganese feroxyhyte: a novel nanoadsorbent equally selective for As(III) and As(V) removal from drinking water.

The development of a single-phase Fe/Mn oxy-hydroxide (δ-Fe0.76Mn0.24OOH), highly efficient at adsorbing both As(III) and As(V), is reported. Its synthesis involves the coprecipitation of FeSO4 and KMnO4 in a kilogram-scale continuous process, in acidic and strongly oxidizing environments. The produced material was identified as a manganese feroxyhyte in which tetravalent manganese is homogeneously distributed into the crystal unit, whereas a second-order hollow spherical morphology is favored. According to this structuration, the oxy-hydroxide maintains the high adsorption capacity for As(V) of a single Fe oxy-hydroxide combined with enhanced As(III) removal based on the oxidizing mediation of Mn(IV). Ion-exchange between arsenic species and sulfates as well as the strongly positive surface charge further facilitate arsenic adsorption. Batch adsorption tests performed in natural-like water indicate that Mn(IV)-feroxyhyte can remove 11.7 μg As(V)/mg and 6.7 μg As(III)/mg at equilibrium pH 7, before residual concentration overcomes the regulation limit of 10 μg As/L for drinking water. The improved efficiency of this material, its low cost, and the possibility for scaling-up its production to industry indicate the high practical impact and environmental importance of this novel adsorbent.

Fe-based nanoparticles as tunable magnetic particle hyperthermia agents

Magnetic hyperthermia, an alternative anticancer modality, is influenced by the composition, size, magnetic properties, and degree of aggregation of the corresponding nanoparticle heating agents. Here, we attempt to evaluate the AC magnetic field heating response of Fe-based nanoparticles prepared by solar physical vapor deposition, a facile, high-yield methodology. Nanoparticle systems were grown by evaporating targets of Fe and Fe3O4 with different stoichiometry. It is observed that Fe3O4 nanoparticles residing in the magnetic monodomain region exhibit increased heating efficiency together with high specific loss power values above 0.9 kW/g at 765 kHz and 24 kA/m, compared with that of 0.1 kW/g for zero-valent Fe nanoparticles under the same conditions. The enhanced performance of Fe3O4 nanoparticles under the range of field explored (12–24 kA/m) may be attributed to the activation of a magnetic hysteresis loss mechanism when the applied AC field surpasses the particle anisotropy field at H ≥ 0.5HA. Thi...

Morphology influence on nanoscale magnetism of Co nanoparticles: Experimental and theoretical aspects of exchange bias

Co-based nanostructures ranging from core-shell to hollow nanoparticles were produced by varying the reaction time and the chemical environment during the thermal decomposition of Co2(CO)8. Both structural characterization and kinetic model simulation illustrate that the diffusivities of Co and oxygen determine the growth ratio and the final morphology of the nanoparticles. Exchange coupling between Co and Co-oxide in core/shell nanoparticles induced a shift of field-cooled hysteresis loops that is proportional to the shell thickness, as verified by numerical studies. The increased nanocomplexity when going from core/shell to hollow particles, also leads to the appearance of hysteresis above 300 K due to an enhancement of the surface anisotropy resulting from the additional spin-disordered surfaces.

Aging of magnetic properties in MgO films

In this work we report on the magnetic behavior of MgO thin films prepared by sputtering. A severe aging process of the ferromagnetic properties is detected in magnetic samples exposed to ambient atmosphere. However, ferromagnetism can be successively switched on again by annealing samples in vacuum. We suggest this behavior reflects the key role played by defects in stabilizing ferromagnetism in MgO films and is likely to be closely related to the hydrogen-driven instability of V-type centers in this material.

Thermal, dielectrical and mechanical response of α and β-poly(vinilydene fluoride)/Co-MgO nanocomposites

Nanocomposites of the self-forming core-shell Co-MgO nanoparticles, which were of approximately 100 nm in diameter, and poly(vinylidene fluoride) (PVDF) polymer have been prepared. When the polymer is crystallized in the α-phase, the introduction of the nanoparticles leads to nucleation of the γ-phase of PVDF, increasing also the melting temperature of the polymer. With the introduction of the Co-MgO particles, the dielectric constant of the material slightly increases and the storage modulus decreases with respect to the values obtained for the pure polymer.

The effects of exchange bias on Fe-Co/MgO magnetic nanoparticles with core/shell morphology

The effects of exchange bias on core/shell structured nanoparticles are analyzed. Nanoparticles are integrated with high moment Fe-Co crystallites covered epitaxially with MgO shells. It is observed that the coercive field H(C)(FeCo)>H(C)(Co)>H(C)(Fe); however, the exchange bias field H(E) of the Co sample is higher than that of the FeCo one, while H(E)=0 for the Fe sample. It is suggested that the exchange bias is induced by the formation of a (Co, Mg)O solid solution. In fact, we show that it is possible to modify the exchange bias properties by manipulating the level of Mg dusting at the interface, as recently reported for thin films.

One-Step Route to Iron Oxide Hollow Nanocuboids by Cluster Condensation: Implementation in Water Remediation Technology

The fabrication procedure of hollow iron oxide nanoparticles with a large surface to volume ratio by a single-step gas condensation process at ambient temperature is presented. Fe clusters formed during the sputtering process are progressively transformed into hollow cuboids with oxide shells by the Kirkendall mechanism at the expense of oxygen captured inside the deposition chamber. TEM and Raman spectroscopy techniques point to magnetite as the main component of the nanocuboids; however, the magnetic behavior exhibited by the samples suggests the presence of FeO as well. In addition, these particles showed strong stability after several months of exposure to ambient conditions, making them of potential interest in diverse technological applications. In particular, these hierarchical hollow particles turned out to be very efficient for both As(III) and As(V) absorption (326 and 190 mg/g, respectively), thus making them of strong interest for drinking water remediation.