C.P. Kaushik

Biodegradation aspects of Polycyclic Aromatic Hydrocarbons (PAHs): A review

PAHs are aromatic hydrocarbons with two or more fused benzene rings with natural as well as anthropogenic sources. They are widely distributed environmental contaminants that have detrimental biological effects, toxicity, mutagenecity and carcinogenicity. Due to their ubiquitous occurrence, recalcitrance, bioaccumulation potential and carcinogenic activity, the PAHs have gathered significant environmental concern. Although PAH may undergo adsorption, volatilization, photolysis, and chemical degradation, microbial degradation is the major degradation process. PAH degradation depends on the environmental conditions, number and type of the microorganisms, nature and chemical structure of the chemical compound being degraded. They are biodegraded/biotransformed into less complex metabolites, and through mineralization into inorganic minerals, H(2)O, CO(2) (aerobic) or CH(4) (anaerobic) and rate of biodegradation depends on pH, temperature, oxygen, microbial population, degree of acclimation, accessibility of nutrients, chemical structure of the compound, cellular transport properties, and chemical partitioning in growth medium. A number of bacterial species are known to degrade PAHs and most of them are isolated from contaminated soil or sediments. Pseudomonas aeruginosa, Pseudomons fluoresens, Mycobacterium spp., Haemophilus spp., Rhodococcus spp., Paenibacillus spp. are some of the commonly studied PAH-degrading bacteria. Lignolytic fungi too have the property of PAH degradation. Phanerochaete chrysosporium, Bjerkandera adusta, and Pleurotus ostreatus are the common PAH-degrading fungi. Enzymes involved in the degradation of PAHs are oxygenase, dehydrogenase and lignolytic enzymes. Fungal lignolytic enzymes are lignin peroxidase, laccase, and manganese peroxidase. They are extracellular and catalyze radical formation by oxidation to destabilize bonds in a molecule. The biodegradation of PAHs has been observed under both aerobic and anaerobic conditions and the rate can be enhanced by physical/chemical pretreatment of contaminated soil. Addition of biosurfactant-producing bacteria and light oils can increase the bioavailability of PAHs and metabolic potential of the bacterial community. The supplementation of contaminated soils with compost materials can also enhance biodegradation without long-term accumulation of extractable polar and more available intermediates. Wetlands, too, have found an application in PAH removal from wastewater. The intensive biological activities in such an ecosystem lead to a high rate of autotrophic and heterotrophic processes. Aquatic weeds Typha spp. and Scirpus lacustris have been used in horizontal-vertical macrophyte based wetlands to treat PAHs. An integrated approach of physical, chemical, and biological degradation may be adopted to get synergistically enhanced removal rates and to treat/remediate the contaminated sites in an ecologically favorable process.

Vermiconversion of industrial sludge for recycling the nutrients.

The aim of the present study was to investigate the transformation of sugar mill sludge (PM) amended with biogas plant slurry (BPS) into vermicompost employing an epigeic earthworm Eisenia fetida. To achieve the objectives experiments were conducted for 13 weeks under controlled environmental conditions. In all the waste mixtures, a decrease in pH, TOC, TK and C:N ratio, but increase in TKN and TP was recorded. Maximum worm biomass and growth rate was attained in 20% PM containing waste mixture. It was inferred from the study that addition of 30-50% of PM with BPS had no adverse effect on the fertilizer value of the vermicompost as well as growth of E. fetida. The results indicated that vermicomposting can be an alternate technology for the management and nutrient recovery from press mud if mixed with bulking agent in appropriate quantities.

Hydrogen production and metal-dye bioremoval by a Nostoc linckia strain isolated from textile mill oxidation pond

Biohydrogen production by Nostoc linckia HA-46, isolated from a textile-industry oxidation-pond was studied by varying light/dark period, pH, temperature and ratio of carbon-dioxide and argon in the gas-mixture. Hydrogen production rates were maximum under 18 h of light and 6 h of darkness, pH 8.0, 31°C, a CO(2):Ar ratio 2:10. Hydrogen production of the strain acclimatized to 20 mg/L of chromium/cobalt and 100 mg/L of Reactive red 198/crystal violet dye studied in N-supplemented/deficient medium was 6-10% higher in the presence of 1.5 g/L of NaNO(3). Rates of hydrogen production in the presence of dyes/metals by the strain (93-105 μmol/h/mg Chlorophyll) were significantly higher than in medium without metals/dyes serving as control (91.3 μmol/h/mg Chlorophyll). About 58-60% of the two metals and 35-73% of dyes were removed by cyanobacterium. Optimal conditions of temperature, pH and metals/dyes concentration for achieving high hydrogen production and wastewater treatment were found practically applicable as similar conditions are found in the effluent of regional textile-mills.

Integrating photobiological hydrogen production with dye–metal bioremoval from simulated textile wastewater

The study reports production of hydrogen in photobioreactors with free (PBR(Fr)) and immobilized (PBR(Imm)) Nostoc biomass at enhanced and sustained rates. Before running the photobioreactors, effects of different immobilization matrices and cyanobacterial dose on hydrogen production were studied in batch mode. As hydrogen production in the PBRs declined spent biomass from the photobioreactors were collected and utilized further for column biosorption of highly toxic dyes (Reactive Red 198+Crystal Violet) and metals (hexavalent chromium and bivalent cobalt) from simulated textile wastewater. Breakthrough time, adsorption capacity and exhaustion time of the biosorption column were studied. The photobioreactors with free and immobilized cyanobacterium produced hydrogen at average rates of 101 and 151 μmol/h/mg Chl a, respectively over 15 days, while the adsorption capacity of the spent biomass was up to 1.4 and 0.23 mg/g for metals and 15 and 1.75 mg/g for the dyes, respectively in continuous column mode.

Nutrient recycling and management of press mud, parthenium and biogas plant slurry employing earthworms

Sugar industry has been included in the list of the most polluting industries. The aim of this study was to transform sugar mill sludge (PM) and Parthenium amended with Biogas Plant Slurry (BPS) into vermicompost employing Eisenia fetida. In all the waste mixtures, a decrease in pH, TOC, TK and C : N ratio, but increase in TKN and TP was recorded. Maximum worm biomass and growth rate was attained in 25% PM + 50% BPS + 25% Parthenium weed waste mixture. The results indicated that Parthenium along with PM could be converted into good-quality manure by earthworms if mixed in appropriate ratio with BPS.