Carl A. Menning

General trend for adsorbate-induced segregation of subsurface metal atoms in bimetallic surfaces

It is well known that the unique chemical properties of transition metal alloys depend on the configuration of metal atoms of the bimetallic surfaces. Using density functional theory calculations, the thermodynamic potential for segregation of an admetal from the subsurface to surface configuration is shown to correlate linearly with the difference in occupied d-band center, Delta epsilon(d), between these two configurations for a wide range of bimetallic systems. The thermodynamic potential for segregation is also shown to increase with the Pauling electronegativity for several adsorbates, including atomic H, O, C, N, S, and Se. A generalized equation is provided to predict the stable surface configuration for the bimetallic systems with different adsorbates.

Thermodynamics and kinetics of oxygen-induced segregation of 3d metals in Pt-3d-Pt(111) and Pt-3d-Pt(100) bimetallic structures

The stability of subsurface 3d transition metals (3d represents Ni, Co, Fe, Mn, Cr, V, and Ti) in Pt(111) and Pt(100) was examined in vacuum and with 0.5 ML atomic oxygen by a combined experimental and density functional theory (DFT) approach. DFT was used to predict the trends in the binding energy of oxygen and in the stability of 3d metals to remain in the subsurface layer. DFT calculations predicted that for both (111) and (100) crystal planes the subsurface Pt-3d-Pt configurations were thermodynamically preferred in vacuum and that the surface 3d-Pt-Pt configurations were preferred with the adsorption of 0.5 ML atomic oxygen. Experimentally, the DFT predictions were verified by using Auger electron spectroscopy to monitor the segregation of Ni and Co in Pt-3d-Pt structures on polycrystalline Pt foil, composed of mainly (111) and (100) facets. The activation barrier for the oxygen-induced segregation of Ni was found to be 17+/-1 kcal/mol attributed to the Pt(111) areas and 27+/-1 kcal/mol attributed to the Pt(100) areas of the Pt foil. For Pt-Co-Pt, the activation barrier was found to be 10+/-1 kcal/mol and was attributed to the Pt(111) areas of the Pt foil. The Bronsted-Evans-Polanyi relationship was utilized to predict the activation barriers for segregation of the other Pt-3d-Pt(111) and Pt-3d-Pt(100) systems. These results are further discussed in connection to the activity and stability for cathode bimetallic electrocatalysts for proton exchange membrane fuel cells.

Experimental and theoretical study of reactivity trends for methanol on Co∕Pt(111) and Ni∕Pt(111) bimetallic surfaces

Methanol was used as a probe molecule to examine the reforming activity of oxygenates on NiPt(111) and CoPt(111) bimetallic surfaces, utilizing density functional theory (DFT) modeling, temperature-programmed desorption, and high-resolution electron energy loss spectroscopy (HREELS). DFT results revealed a correlation between the methanol and methoxy binding energies and the surface d-band center of various NiPt(111) and CoPt(111) bimetallic surfaces. Consistent with DFT predictions, increased production of H2 and CO from methanol was observed on a Ni surface monolayer on Pt(111), designated as Ni-Pt-Pt(111), as compared to the subsurface monolayer Pt-Ni-Pt(111) surface. HREELS was used to verify the presence and subsequent decomposition of methoxy intermediates on NiPt(111) and CoPt(111) bimetallic surfaces. On Ni-Pt-Pt(111) the methoxy species decomposed to a formaldehyde intermediate below 300 K; this species reacted at approximately 300 K to form CO and H2. On Co-Pt-Pt(111), methoxy was stable up to approximately 350 K and decomposed to form CO and H2. Overall, trends in methanol reactivity on NiPt(111) bimetallic surfaces were similar to those previously determined for ethanol and ethylene glycol.