Carla Ruffeil Moreira

Assessment of linear and angular measurements on three-dimensional cone-beam computed tomographic images

OBJECTIVE The purpose of this research was to provide further evidence to demonstrate the precision and accuracy of maxillofacial linear and angular measurements obtained by cone-beam computed tomography (CBCT) images. STUDY DESIGN The study population consisted of 15 dry human skulls that were submitted to CBCT, and 3-dimensional (3D) images were generated. Linear and angular measurements based on conventional craniometric anatomical landmarks, and were identified in 3D-CBCT images by 2 radiologists twice each independently. Subsequently, physical measurements were made by a third examiner using a digital caliper and a digital goniometer. RESULTS The results demonstrated no statistically significant difference between inter- and intra-examiner analysis. Regarding accuracy test, no statistically significant differences were found of the comparison between the physical and CBCT-based linear and angular measurements for both examiners (P = .968 and .915, P = .844 and .700, respectively). CONCLUSIONS 3D-CBCT images can be used to obtain dimensionally accurate linear and angular measurements from bony maxillofacial structures and landmarks.

3-D volume rendering maxillofacial analysis of angular measurements by multislice CT.

OBJECTIVE This study was designed to determine the precision and accuracy of angular measurements using three-dimensional computed tomography (3D-CT) volume rendering by computer systems. STUDY DESIGN The study population consisted of 28 dried skulls that were scanned with a 64-row multislice CT, and 3D-CT images were generated. Angular measurements, (n = 6) based upon conventional craniometric anatomical landmarks (n = 9), were identified independently in 3D-CT images by 2 radiologists, twice each, and were then performed by 3D-CT imaging. Subsequently, physical measurements were made by a third examiner using a Beyond Crysta-C9168 series 900 device. RESULTS The results demonstrated no statistically significant difference between interexaminer and intraexaminer analysis. The mean difference between the physical and 3-D-based angular measurements was -1.18% and -0.89%, respectively, for both examiners, demonstrating high accuracy. CONCLUSION Maxillofacial analysis of angular measurements using 3D-CT volume rendering by 64-row multislice CT is established and can be used for orthodontic and dentofacial orthopedic applications.

Comparative study of single and multislice computed tomography for assessment of the mandibular canal.

Objective: The purpose of this study was to evaluate the accuracy of relative measurements from the roof of the mandibular canal to the alveolar crest in multislice (multidetector) computed tomography (MDCT) and single-slice computed tomography (SSCT). Material and Methods: The sample consisted of 26 printed CT films (7 SSCT and 19 MDCT) from the files of the LABI-3D (3D Imaging Laboratory) of the School of Dentistry of the University of São Paulo (FOUSP), which had been acquired using different protocols. Two observers analyzed in a randomized and independent order a series of 22 oblique CT reconstructions of each patient. Each observer analyzed the CT scans twice. The length of the mandibular canal and the distance between the mandibular canal roof and the crest of the alveolar ridge were obtained. Dahlberg test was used for statistical analysis. Results: The mean error found for the mandibular canal length measurements obtained from SSCT was 0.53 mm in the interobserver analysis, and 0.38 mm for both observers. On MDCT images, the mean error was 0.0 mm in the interobserver analysis, and 0.0 and 0.23 mm in the intraobserver analysis. Regarding the distance between the mandibular canal roof and the alveolar bone crest, the SSCT images showed a mean error of 1.16 mm in the interobserver analysis and 0.66 and 0.59 mm in the intraobserver analysis. In the MDCT images, the mean error was 0.72 mm in the interobserver analysis and 0.50 and 0.54 mm in the intraobserver analysis. Conclusion: Multislice CT was demonstrated a more accurate method and demonstrated high reproducibility in the analysis of important anatomical landmarks for planning of mandibular dental implants, namely the mandibular canal pathway and alveolar crest height.

Postmortem acinar autolysis in rat sublingual gland: a morphometric study

Objective To analyze and to quantify morphological acinar postmortem changes in rat sublingual glands (SLG). Material and Methods Fifty rats were divided into two groups of 25 animals each. Group I was used for morphological and morphometric evaluations and group II for the determination of gland density and processed gland volume. Acinar autolytic changes were studied at 0 (control group), 3, 6, 12 and 24 h postmortem periods. The morphometric analysis of the volume density (Vv) and total volume (VT) of intact (ia) and autolyzed (aa) acini was performed under light microscopy using a Zeiss II integration grid with 100 symmetrically distributed points. Results Morphologically, temporal progressive nuclear alterations and gradual loss of the structural architecture of acinar cells were found. Regarding quantitative results, both the Vvaa and the Vvia showed statistically significant differences among all postmortem periods (p<0.05). Vvaa increased from 0.42% at 0 h to 75.84% at 24 h postmortem and Vvia decreased from 71.16% to 0% over the same period. For VTaa and VTia, no statistically significant differences occurred between 12-24 h and 0-3 h (p>0.05), respectively. Vtaa increased from 0.18 mm3 at 0 h to 38.17 mm3 at 12 h, while Vtia showed a decrease from 33.47 mm3 to 0 mm3 between 3-24 h postmortem. Data concerning VTaa were adjusted by twovariable linear regression, obtaining the equation: y=-3.54 + 3.38x (r2=0.90). The VTaa growth rate calculated by this equation was 3.38 mm3/h between 0-12 h. Conclusion Acinar autolysis on rat SLG demonstrated the most significant signs during the first 6 h postmortem and was widely spread through the gland at 12 h.

Aplicação de medidas cefalométricas em 3D-TC: Application of cephalometric measurements in 3D-TC

AIM: To test the precision and accuracy of conventional linear cephalometric measurements in 3D reconstructed images using a multislice CT. METHODS: The study population consisted of 10 dry skulls, previously selected, without distinction of ethnic group and sex, which were submitted to a multislice CT 16 slices using 0.5mm of slice thickness and 0.3mm of interval of reconstruction. Subsequently the data was sent to an independent workstation. Conventional craniofacial landmarks (n=13), usually applied to facial orthopedic and orthodontic treatment planning, were localized and linear measurements (n=15) were obtained by 2 radiologists, twice each, independently, in 3D-CT images. In total 600 measurements were made. The correspondent physical measurements were obtained by a third examiner using a digital caliper. Statistical evaluation of the measurements was carried out regarding to inter and intra-examiner, in 3D-CT, and between image and physical measurements from dry skulls, using analysis of variance. RESULTS AND CONCLUSIONS: There were no statistically significant differences between inter and intra-examiner measurements or between imaging and physical measurements. The results also showed an inter-examiner variability error of 2.05%, and an intra-examiner variability error of 2.11%. There were also no statistically significant differences between imaging and physical measurements with p>0.6 for all measurements. The mean difference was from 0.96% to 1.47% for all measurements. The validity of linear cephalometric measurements was established using 3D volume rendering from a multislice CT with high precision and accuracy.