Carlo Fornaini

Conservative Surgical Management of Stage I Bisphosphonate-Related Osteonecrosis of the Jaw

Purpose. To report the efficacy of conservative surgical treatment for stage I bisphosphonate-related osteonecrosis of the jaw (BRONJ). Materials and Methods. This study reports the clinical outcomes of 63 patients treated for BRONJ stage I (according to Ruggieros staging system) at the Oral Pathology and Laser-Assisted Surgery Unit of the University of Parma between January 2004 and January 2011. Surgical interventions were performed, under local analgesia, in patients unresponsive for a period of six months to noninvasive treatments such as cycles of local or systemic antibacterial therapy combined or not to low level laser therapy, ozone therapy, or Hyperbaric Oxygen Therapy. All interventions were performed after the consultation of oncologist or physician. Results. In our experience, conservative surgical treatment is associated with the highest number of BRONJ healed sites in stage I disease. Complete healing was observed in 92.6% of sites surgically treated. Conclusions. This study confirms that treatment of patients affected by minimal bone exposition, (stage I of BRONJ), through conservative surgical strategies, possibly with laser, may result in a high control of the disease in the long term.

Case series of 589 tooth extractions in patients under bisphosphonates therapy. Proposal of a clinical protocol supported by Nd:YAG low-level laser therapy.

Objective: Trauma during dental surgery is a predisposing factor for bisphosphonates (BP)-related osteonecrosis of the jaws (BRONJ). However, about 40% of cases of BRONJ are not related to dental invasive procedures, being probably associated to endodontic or periodontal infections. Extraction of non-treatable teeth is considered a reliable choice, to improve symptoms and to reduce the risk of BRONJ. Here we report our experience of tooth extractions in patients under oral or intravenous BP therapy. Study Design: Two-hundred and seventeen patients (38 males, 179 females; mean age 68.72 ± 11.26 years, range 30 to 83 years) under BP therapy received 589 tooth extractions at the Unit of Oral Medicine, Pathology and Laser-assisted Surgery of the University of Parma, Italy, between June 2006 and December 2010. Ninety five patients were under BP therapy for oncological disease (multiple myeloma (MM): 23; bone metastases (BM): 72) and 122 patients for non oncological diseases: 119 osteoporosis (OP), 2 rheumatoid arthritis (RA) and 1 Paget’s disease (PD). The mean duration of BP was of 35 months. Antibiotic treatment was administered three days before and 2 weeks after tooth extractions. Patients were additionally treated with low level laser therapy (LLLT) through Nd:YAG laser (1064 nm – power 1.25 W; frequency 15 Hz; fibre diameter: 320 ?m), 5 application of 1 minute each. Patients were evaluated 3 days and once a week for 2 months after the extractions and every time they received LLLT. Mean follow-up was 15 months (ranging from 4 to 31 months). Results: In a total of 589 extractions (285 mandibular, 304 maxillary) performed, a minimal bone exposure was observed in 5 cases, treated with Er:YAG laser vaporization and than healed. Conclusions: Our experience supports the hypothesis that the association of antibiotic treatment and LLLT can be effective in preventing ONJ after tooth extractions in patients under BPT. Key words:Nd:YAG laser, low level laser therapy, tooth extractions, bisphosphonates, jaws osteonecrosis.

Early Surgical Laser-Assisted Management of Bisphosphonate-Related Osteonecrosis of the Jaws (BRONJ): A Retrospective Analysis of 101 Treated Sites with Long-Term Follow-Up

BACKGROUND DATA The management of bisphosphonate-related osteonecrosis of the jaws (BRONJ) is still controversial. OBJECTIVE The purpose of this study was to compare surgical and nonsurgical approaches to the treatment of BRONJ and the possible usefulness of Nd:YAG and Er:YAG lasers. METHODS One hundred and twenty-eight patients (33 males, 95 females; 52 with diagnosis of multiple myeloma, 53 with diagnosis of bone metastasis, and 23 with diagnosis of osteoporosis) affected by BRONJ were evaluated at the Unit of Oral Pathology and Medicine and Laser-Assisted Surgery of the University of Parma, Italy, between January 2004 and July 2009. Overall number of BRONJ sites was 151, and number of treated sites was 101. In order to assess the efficacy of different treatments, sites were subclassified as follows: Group 1 (G1): 12 sites treated with medical therapy; Group 2 (G2): 27 sites treated with medical therapy associated with low level laser therapy (LLLT); Group 3 (G3): 17 sites treated with a combination of medical and surgical therapy; Group 4 (G4): 45 sites treated with a combination of medical therapy, surgical (including laser-assisted) therapy, and LLLT. Outcome of treatment was assessed using the staging system proposed by Ruggiero et al. Transition from a higher stage to a lower one for at least 6 months was considered as clinical improvement and suggestive of a successful treatment. RESULTS Clinical improvement was achieved in 3 out of 12 (25%) BRONJ sites in G1. Sites if G2 with an improvement were 18 out of 27 (66%). Nine out 17 BRONJ sites (53%) in G3 had a transition to a lower stage after treatment. For sites in G4, a clinical improvement was recorded in 40 out of 45 cases (89%). CONCLUSIONS In our experience, the percentage of success obtained with a combined approach based on medical therapy, surgical (including laser-assisted) therapy, and LLLT (G4) is significantly higher than the percentage of improvement obtained in G1, G2, and G3.

Patient responses to Er:YAG laser when used for conservative dentistry

The utilization of laser technology in conservative dentistry offers several advantages compared with traditional instruments, but one of the still unsolved problems is the difficulty in describing and explaining these advantages to patients. The aims of this study were to verify the efficacy of the way patients are informed and to evaluate their satisfaction with laser-assisted treatment. Before treatment, 100 patients were given a brochure that explained the relevant laser-assisted dental procedures, and after dental treatment an 11-item questionnaire was administered to the patients to evaluate their satisfaction with the treatment. Statistical analysis showed high levels of satisfaction for all the questions, especially those regarding the choice between laser therapy and traditional instruments (100%), choosing laser in the future (89%), and recommending it to family and friends (84%). This study may be relevant when determining the overall satisfaction of patients with this new technology.

Surgical Approach and Laser Applications in BRONJ Osteoporotic and Cancer Patients

Bisphosphonates-related Osteonecrosis of the Jaw (BRONJ) has been reported with increasing frequency in literature over last years, but its therapy is still a dilemma. One hundred ninety patients affected by BRONJ were observed between January 2004 and November 2011 and 166 treated sites were subdivided in five groups on the basis of the therapeutical approach (medical or surgical, traditional or laser-assisted approach, with or without Low Level Laser Therapy (LLLT)). Clinical success has been defined for each treatment performed as clinical improvement or complete mucosal healing. Combination of antibiotic therapy, conservative surgery performed with Er:YAG laser and LLLT applications showed best results for cancer and noncancer patients. Nonsurgical approach performed on 69 sites induced an improvement in 35 sites (50.7%) and the complete healing in 19 sites (27.5%), while surgical approach on 97 sites induced an improvement in 84 sites (86.6%) and the complete healing in 78 sites (80.41%). Improvement and healing were recorded in 31 (81.5%) and 27 (71.5%) out of the 38 BRONJ sites treated in noncancer patients and in 88 (68.75%) and in 69 (53.9%) out of the 128 in cancer patients.

Intraoral laser welding: ultrastructural and mechanical analysis to compare laboratory laser and dental laser

The Nd:YAG laser has been used since 1970 in dental laboratories to weld metals on dental prostheses. Recently in several clinical cases, we have suggested that the Nd:YAG laser device commonly utilized in the dental office could be used to repair broken fixed, removable and orthodontic prostheses and to weld metals directly in the mouth. The aim of this work was to evaluate, using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and dynamic mechanical analysis (DMA), the quality of the weld and its mechanical strength, comparing a device normally used in dental laboratory and a device normally used in the dental office for oral surgery, the same as that described for intraoral welding. Metal plates of a Co-Cr-Mo dental alloy and steel orthodontic wires were subjected to four welding procedures: welding without filler metal using the laboratory laser, welding with filler metal using the laboratory laser, welding without filler metal using the office laser, and welding with filler metal using the office laser. The welded materials were then analysed by SEM, EDS and DMA. SEM analysis did not show significant differences between the samples although the plates welded using the office laser without filler metal showed a greater number of fissures than the other samples. EDS microanalysis of the welding zone showed a homogeneous composition of the metals. Mechanical tests showed similar elastic behaviours of the samples, with minimal differences between the samples welded with the two devices. No wire broke even under the maximum force applied by the analyser. This study seems to demonstrate that the welds produced using the office Nd:YAG laser device and the laboratory Nd:YAG laser device, as analysed by SEM, EDS and DMA, showed minimal and nonsignificant differences, although these findings need to be confirmed using a greater number of samples.

Welding in the dental office by fiber-delivered laser: a new technique.

OBJECTIVE The aim of this study is to demonstrate the ability of dentists to weld different metals during daily practice using a fiber-delivered laser normally used for dental surgery, and to evaluate the possibilities offered by this new technique. BACKGROUND DATA Laser welding is a common technique that has long been used in dental technician laboratories. It has many advantages over conventional techniques: it may be applied directly to master casts, and it avoids damage to the acrylic or ceramic portions close to the welded area. In addition, it may be applied on different types of metallic alloys, and it may provide a stronger attachment than other more traditional techniques. The cost, size, and limited flexibility of laser transmission systems using fixed lenses have restricted their use to dental technician laboratories. MATERIALS AND METHODS The authors detail their experience with welding using an Nd:YAG fiberoptic-delivered laser that is normally used for dental therapy. RESULTS This work describes some clinical cases that demonstrate the ease of use of this technique to weld broken appliances for both prosthetic and orthodontic therapy. CONCLUSION Dentists using this technique can carry out immediate restoration of metallic fixed, removable, and orthodontic broken prostheses in their own offices, thus reducing the time needed for such repairs.

Low energy KTP laser in oral soft tissues surgery: A 52 patients clinical study

Objectives: Since 1962 laser appliances have been used for soft tissues surgery of oral cavity with significant advantages compared to the traditional instruments: excellent bleeding control, possibility to avoid the use of suture, good patient compliance thanks to a decrease of intra- and post-operative discomfort and biostimulating effect. Unfortunately, the wavelengths so far used have been seen to cause, in association with an excellent ablation capacity, heat damage of the tissues that can decrease healing process and cause a greater discomfort to patients. The aim of this study was to evaluate the laser-assisted KTP laser surgery at low power in terms of characteristics of intervention and patients compliance. Study design: In this study, we describe the application of a new and recently introduced in dentistry wavelength, the KTP laser (532 nm), used with low power (1 Watt - CW), evaluating the time of interventions and, by a Numerical Rating Scale, the intra and postoperative pain. Results: KTP laser used at low power permits to obtain good pain control during operations that were carried out with only a topic anaesthetic (EMLA, Astratech), as shown in VAS tests. Good healing with limited or absent burning areas in treated portion of tissue. Conclusions: These preliminary study allows us to affirm that KTP laser with low parameters permits to perform oral surgery with good pain control and good wound healing. A greater number of clinical cases are however necessary to confirm the result obtained. Key words: Laser, KTP, oral surgery, thermal increase.

Intra-oral laser welding: an in vitro evaluation of thermal increase

The neodymium:yttrium–aluminium–garnet (Nd:YAG) laser is currently used in dental laboratories to weld metals on dental prostheses. Recently, the use of Nd:YAG has been suggested so that dentists themselves can repair broken fixed, removable and orthodontic prostheses by welding metals directly in the mouth. This work aimed to evaluate, through a four k-type thermocouple system on calf jaws, the thermal increase in the biological structures close to the metal parts during laser welding. We put two hemispherical metal plates onto mandibular molars and then laser welded them at three points with a four k-thermocouple system to determine the thermal rise in the pulp chamber, sulcus, root and bone. This procedure was carried out on 12 samples, and the results were processed. The highest values of thermal increase were found in the pulp chamber, 1.5°C; sulcus, 0.7°C; root, 0.3°C; and bone, 0.3°C. This study showed that thermal increases in pulp chamber, sulcus, root and bone were biologically compatible and that intra-oral laser welding, at the parameters used in this work, seems to be harmless to the biological structures close to the welding and thermally affected zones.

Intraoral metal laser welding: a case report

AbstractsThe possibility of laser welding of dental prostheses offers great advantages: first, the operator has the possibility of welding on the master model, which decreases the number of passages and thus the possibility of errors and damage, and secondly, the patient attends only a few sessions, and, due to the possibility of fixing the damaged prostheses, there is no need to resort to the technician’s laboratory. In a previous study we described the experimental phases of intraoral welding, from the in vitro model on animal jaws with evaluations of the temperature variations during welding through thermal chamber and type K thermocouples. In this study we describe the intraoral welding in vivo on human subjects by using, as in the previous study, a fibre-delivered neodymium:yttrium–aluminum–garnet (Nd:YAG) laser. The in vivo phase allowed a restored prosthesis to be positioned and intraorally welded in the upper central sector with optimal results both in patient’s comfort and in aesthetic effects. This first in vivo test confirmed that the use of a laser technique for the intraoral welding of metal prostheses is possible, with no particular problems and risks for the biological structures close to the welding zone.