Carolina Lima

Fermentation Medium for Collagenase Production by Penicillium aurantiogriseum URM4622

Medium composition and culture conditions for maximal collagenase production by Penicillium aurantiogriseum URM4622 were optimized using a response surface approach. A full two‐level design on three factors (initial medium pH, soybean flour concentration, and temperature) was employed to identify the most significant fermentation parameters for collagenase production, and a subsequent central composite design (CCD) was used to find the optimal levels of the two most significant factors (initial medium pH and soybean flour concentration). The design results indicated that the initial medium pH and the temperature had significant negative main effects, whereas the substrate concentration had a positive effect on the collagenase production. The maximum collagenolytic activity predicted by the fitted response surface was expected to occur at pH 7.21, 1.645% soybean flour concentration and 24°C. Three replicate experiments were run at these conditions and yielded an activity response of 283.36 ± 1.33 U, which not only is the highest obtained in this study but also represents a 5‐fold increase over the lowest response observed in the initial design. Since all experiments were carried out with an inexpensive substrate, the final results point out to a cost‐effective medium for collagenase production with potential industrial‐scale applications.

Collagenolytic enzymes produced by fungi: a systematic review

Specific proteases capable of degrading native triple helical or denatured collagen have been required for many years and have a large spectrum of applications. There are few complete reports that fully uncover production, characterization and purification of fungi collagenases. In this review, authors searched through four scientific on line data bases using the following keywords (collagenolytic OR collagenase) AND (fungi OR fungus OR fungal) AND (production OR synthesis OR synthesize) AND (characterization). Scientific criteria were adopted in this review to classify found articles by score (from 0 to 10). After exclusion criteria, 21 articles were selected. None obtained the maximum of 10 points defined by the methodology, which indicates a deficiency in studies dealing simultaneously with production, characterization and purification of collagenase by fungi. Among microorganisms studied the non-pathogenic fungi Penicillium aurantiogriseum and Rhizoctonia solani stood out in volumetric and specific collagenase activity. The only article found that made sequencing of a true collagenase showed 100% homology with several metalloproteinases fungi. A clear gap in literature about collagenase production by fungi was verified, which prevents further development in the area and increases the need for further studies, particularly full characterization of fungal collagenases with high specificity to collagen.

Optimization of Penicillium aurantiogriseum protease immobilization on magnetic nanoparticles for antioxidant peptides’ obtainment

ABSTRACT This work reports an optimization of protease from Penicillium aurantiogriseum immobilization on polyaniline-coated magnetic nanoparticles for antioxidant peptides’ obtainment derived from bovine casein. Immobilization process was optimized using a full two-level factorial design (24) followed by a response surface methodology. Using the derivative, casein was hydrolyzed uncovering its peptides that were sequenced and had antioxidant properties tested through (2,2′-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt) (ABTS) radical scavenging and hydrogen peroxide scavenging assays. Optimal conditions for immobilization were 2 hr of immobilization, offered protein amount of 200 µg/mL, immobilization pH of 6.3 and 7.3 hr of activation. Derivative keeps over 74% of its original activity after reused five times. Free and immobilized enzyme casein hydrolysates presented similar peptide mass fingerprints, and prevalent peptides could be sequenced. Hydrolysates presented more than 2.5× higher ROS scavenging activity than nonhydrolyzed casein, which validates the immobilized protease capacity to develop casein-derived natural ingredients with potential for functional foods.

Single step purification via magnetic nanoparticles of new broad pH active protease from Penicillium aurantiogriseum

A new set of applications can be achieved when using high stability proteases. Industrially, high costs can be related to production medium and purification process. Magnetic nanoparticles have been successfully used for rapid and scalable purification. In this work, azocasein were immobilized on magnetite nanoparticles and applied in a single step purification of protease produced by Penicillium aurantiogriseum using soybean flour medium, and the new purified enzyme was characterized. Glutaraldehyde activated nanoparticles were used in azocasein immobilization and then incubated with dialyzed 60-80% saline precipitation fraction of crude extract for purification. Adsorbents were washed 7 times (0.1 M NaCl solution) and eluted 3 times (1 M NaCl solution), these final elutions contained the purified protease. This protease was purified 55.68-fold, retaining 46% of its original activity. Presented approximately 40 kDa on SDS-PAGE and optimum activity at 45 °C and pH 9.0. Maintained over 60% of activity from pH 6.0 to 11.0. Kept more than 50% activity from 15 to 55 °C, did not lose any activity over 48 h at 25 °C. Inhibitors assay suggested a serine protease with aspartic residues on its active site. Results report a successful application of an alternative purification method and novel broad pH tolerant protease.

Production and characterization of collagenase by Penicillium sp. UCP 1286 isolated from Caatinga soil

A new Penicillium sp. strain isolated from the soil of Caatinga, a Brazilian Biome (UCP 1286) was selected for collagenase production. Fermentation system allowing obtention of collagenolytic activity about 2.7 times higher than existing data, with the highest values of collagenolytic and specific activity (379.80 U/mL, 1460.77 U/mg, respectively), after 126 hours. Applying a factorial design, enzyme production was increased by about 65% compared to the preliminary results. The factorial design demonstrated the existence of two factors with statistical significance on the production of the enzyme: pH and temperature, both with negative effects. Enzyme was found to be more active at pH 9.0 and 37 °C, and also to be very stable in comparison with the collagenase produced by other microorganisms. The enzyme seems to belong to collagenolytic serine proteases family. Concerning the substrate specificity, it was observed that the highest enzyme activity corresponds to azocoll, there was no relevant activity on azocasein and the enzyme showed to be more specific to type V collagen and gelatin than the commercial colagenase produced by Clostridium histolyticum. Major band observed at electrophoresis was approximately 37 kDa. Zymogram analysis confirmed the collagenolytic activity. All data indicates this enzyme as promising biotechnology product.