Catarina Figueira

Medical staff extremity dosimetry in CT fluoroscopy: an anthropomorphic hand voxel phantom study.

This work aims to contribute to the study of the radiation dose distribution delivered to the hands of medical staff members during a general computed tomographic (CT) fluoroscopic guided procedure. In this study, both Monte Carlo simulations and measurements were performed. For free-in-air and computed tomography dose index (CTDI) body phantom measurements, a standard pencil ionization chamber (IC) 100 mm long was used. The CT scanner model was implemented using MCNPX (Monte Carlo N-Particle eXtended) and was successfully validated by comparing the simulated results with measurements. Subsequently, CT images of a hand, together with an anthropomorphic phantom, were voxelized and used with the MCNPX code for dose calculations. The hand dose distribution study was performed both by using thermo-luminescent detector measurements and Monte Carlo simulations. The validated simulation tool provides a new perspective for detailed investigations of CT-irradiation scenarios. Simulations show that there is a strong dose gradient, namely the even zones of the hand that are in precise vicinity to the x-ray beam only receive about 4% of the maximum dose delivered to adjacent areas which are directly exposed to the primary x-ray beam. Finally, the scatter contribution of the patient was also studied through MC simulations. The results show that for directly exposed parts of the hand surface, the dose is reduced by the body of the patient (due to the shielding), whereas the dose is increased by scattered radiation from the patient for parts of the skin that receive scattered radiation only.

Assessment of the occupational exposure in real time during interventional cardiology procedures

Interventional cardiology (IC) procedures can be complex, requiring the operators to work near the patient, during long exposure times. Owing to scattered radiation in the patient and the fluoroscopic equipment, the medical staff are exposed to a non-uniform radiation field and can receive high radiation doses. In this study, it is proposed to analyse staff doses obtained in real time, during IC procedures. A system for occupational dosimetry in real time was used. In order to identify some parameters that may affect the staff doses, Monte Carlo (MC) calculations, using MCNPX v.2.7.0 code and voxel phantoms, were performed. The data obtained from measurements, together with MC simulations, allowed the identification of actions and behaviours of the medical staff that could be considered a risk under routine working conditions. The implementation of this monitoring system for exposure of personnel may have a positive effect on optimisation of radiological protection in fluoroscopically guided cardiac procedures.

Assessment of patient dose reduction by bismuth shielding in CT using measurements, GEANT4 and MCNPX simulations

This work reports on the use of two different Monte Carlo codes (GEANT4 and MCNPX) for assessing the dose reduction using bismuth shields in computer tomography (CT) procedures in order to protect radiosensitive organs such as eye lens, thyroid and breast. Measurements were performed using head and body PMMA phantoms and an ionisation chamber placed in five different positions of the phantom. Simulations were performed to estimate Computed Tomography Dose Index values using GEANT4 and MCNPX. The relative differences between measurements and simulations were <10 %. The dose reduction arising from the use of bismuth shielding ranges from 2 to 45 %, depending on the position of the bismuth shield. The percentage of dose reduction was more significant for the area covered by the bismuth shielding (36 % for eye lens, 39 % for thyroid and 45 % for breast shields).

Paediatric CT exposures: comparison between CTDIvol and SSDE methods using measurements and Monte Carlo simulations

Computed tomography (CT) is one of the most used techniques in medical diagnosis, and its use has become one of the main sources of exposure of the population to ionising radiation. This work concentrates on the paediatric patients, since children exhibit higher radiosensitivity than adults. Nowadays, patient doses are estimated through two standard CT dose index (CTDI) phantoms as a reference to calculate CTDI volume (CTDI vol) values. This study aims at improving the knowledge about the radiation exposure to children and to better assess the accuracy of the CTDI vol method. The effectiveness of the CTDI vol method for patient dose estimation was then investigated through a sensitive study, taking into account the doses obtained by three methods: CTDI vol measured, CTDI vol values simulated with Monte Carlo (MC) code MCNPX and the recent proposed method Size-Specific Dose Estimate (SSDE). In order to assess organ doses, MC simulations were executed with paediatric voxel phantoms.

A novel experimental approach to investigate radiolysis processes in liquid samples using collimated radiation sources

Here is detailed a novel and low-cost experimental method for high-throughput automated fluid sample irradiation. The sample is delivered via syringe pump to a nozzle, where it is expressed in the form of a hanging droplet into the path of a beam of ionising radiation. The dose delivery is controlled by an upstream lead shutter, which allows the beam to reach the droplet for a user defined period of time. The droplet is then further expressed after irradiation until it falls into one well of a standard microplate. The entire system is automated and can be operated remotely using software designed in-house, allowing for use in environments deemed unsafe for the user (synchrotron beamlines, for example). Depending on the number of wells in the microplate, several droplets can be irradiated before any human interaction is necessary, and the user may choose up to 10 samples per microplate using an array of identical syringe pumps, the design of which is described here. The nozzles consistently produce droplets of 25.1 ± 0.5 μl.

Observation of dose-rate dependence in a Fricke dosimeter irradiated at low dose rates with monoenergetic X-rays

Absolute measurements of the radiolytic yield of Fe3+ in a ferrous sulphate dosimeter formulation (6 mM Fe2+), with a 20 keV x-ray monoenergetic beam, are reported. Dose-rate suppression of the radiolytic yield was observed at dose rates lower than and different in nature to those previously reported with x-rays. We present evidence that this effect is most likely to be due to recombination of free radicals radiolytically produced from water. The method used to make these measurements is also new and it provides radiolytic yields which are directly traceable to the SI standards system. The data presented provides new and exacting tests of radiation chemistry codes.

Determination of backscatter factors in breast tomosynthesis using MCNPX simulations and measurements

The perspective of adding digital breast tomosynthesis (DBT) to standard mammography in screening raises concerns regarding the dose absorbed by the fibroglandular breast tissue. Thus, it is important to estimate accurately the mean glandular dose (MGD), although there are no standard protocols for dosimetry, concerning DBT. This study aims at introducing backscatter factors (BSF) to calculate the entrance surface air kerma (ESAK), directly on patients or phantoms, in order to be introduced in the formalism proposed by Dance et al. MCNPX simulations were performed, to mimic a DBT acquisition, for a wide range of X-ray spectra. A homogeneous breast phantom with 50 % of glandular tissue was considered and several thicknesses were evaluated. Dose measurements were performed, to validate and support the simulation results. The BSF may indicate a real MGD estimation in vivo for DBT examinations and contribute for the improvement of the current guidelines used in these applications.

RADIATION EXPOSURE OF MEDICAL STAFF: APPLICATION OF HAND PHANTOMS IN EXPERIMENTS AND SIMULATIONS

To evaluate extremity doses and optimize radiation protection of medical staff, we investigated examples in nuclear medicine and CT fluoroscopy. In addition to measurements with medical staff on-site and with real hand phantoms, selected scenarios were simulated with hand phantoms. Besides simulations of static hand poses also modeling based on consecutive frames from video recordings during handling scenarios was realized. These procedures are useful tools to reveal highest exposures which in turn could promote initiating optimized radiation protection measures.