Catarina M.M. Duarte

Effect of ionic liquids on human colon carcinoma HT-29 and CaCo-2 cell lines

The toxicity of ionic liquids, involving different classes of cations and different types of anions, was evaluated by a colorimetric assay with 3-(4,5-dimethylthiazolyl-2)-2,5-diphenyltetrazolium bromide (MTT) in two colon carcinoma HT-29 and CaCo-2 cell lines. Confluent CaCo-2 cells can undergo spontaneously an enterocytic differentiation and represent a good in vitro model of normal human intestinal epithelium. Ionic liquids are highly promising due to their low vapour pressures, however, toxicity evaluation of these ionic liquids is of great importance to assess the risk of these ionic liquids to humans and the environment.

Toxicological evaluation on human colon carcinoma cell line (CaCo-2) of ionic liquids based on imidazolium, guanidinium, ammonium, phosphonium, pyridinium and pyrrolidinium cations

Toxicological evaluation of a new group of ionic liquids was performed on human colon cancerous cells—CaCo-2. They belong to different classes of cations: imidazolium (IM), dimethyl-guanidinium (dmg) and tetramethyl-guanidinium (tmg), methyl-pyrrolidinium (MPyr), 2-methyl-1-ethyl-pyridinium (2-MEPy), quaternary ammonium (benzyltriethyl-ammonium–BzTEA; phenyltrimethyl-ammonium–PhTMA; tri-n-octyl-methylammonium-Aliquat) and tri-n-hexyl-tetra-n-decylphosphonium (P6,6,6,14). The new results were compared with data obtained in previous reported studies performed in our lab, and we clearly saw that toxicity can vary significantly with the type of anion. Dicyanoamide-[DCA] and bis(trifluoromethanesulfonyl)amide-[NTf2] were seen to visibly change the impact of some cations. Some were considerably less harmful for CaCo-2 monolayer when the anion was [DCA] or [NTf2], while others induced an abnormal increase of cellular metabolism when [NTf2] was present and therefore, they were considered toxic. However, some cations induced similar responses in the presence of a broad number of anions as (1-butyl-3-methylimidazolium)-[C4MIM] (with the exception of [FeCl4]), (1-(2-hydroxyethyl)-3-methylimidazolium)-[C2OHMIM] and [C4MPyr] and did not cause toxicity. Consequently, they are considered promising cations for building human friendlier solvents. But, a reasonable number of other combinations involving different classes of cations were also seen to not significantly affect viability of the CaCo-2 monolayer.

Supercritical fluid-assisted preparation of imprinted contact lenses for drug delivery.

The aim of this work was to develop an innovative supercritical fluid (SCF)-assisted molecular imprinting method to endow commercial soft contact lenses (SCLs) with the ability to load specific drugs and to control their release. This approach seeks to overcome the limitation of the common loading of preformed SCLs by immersion in concentrated drug solutions (only valid for highly water soluble drugs) and of the molecular imprinting methods that require choice of the drug before polymerization and thus to create drug-tailored networks. In particular, we focused on improving the flurbiprofen load/release capacity of daily wear Hilafilcon B commercial SCLs by the use of sequential SCF flurbiprofen impregnation and extraction steps. Supercritical carbon dioxide (scCO2) impregnation assays were performed at 12.0 MPa and 40 °C, while scCO2 extractions were performed at 20.0 MPa and 40 °C. Conventional flurbiprofen sorption and drug removal experiments in aqueous solutions were carried out for comparison purposes. SCF-processed SCLs showed a recognition ability and a higher affinity for flurbiprofen in aqueous solution than for the structurally related ibuprofen and dexamethasone, which suggests the creation of molecularly imprinted cavities driven by both physical (swelling/plasticization) and chemical (carbonyl groups in the network with the C-F group in the drug) interactions. Processing with scCO2 did not alter some of the critical functional properties of SCLs (glass transition temperature, transmittance, oxygen permeability, contact angle), enabled the control of drug loaded/released amounts (by the application of several consecutive processing cycles) and permitted the preparation of hydrophobic drug-based therapeutic SCLs in much shorter process times than those using conventional aqueous-based molecular imprinting methods.

Antioxidant capacity of Macaronesian traditional medicinal plants.

The use of many traditional medicinal plants is often hampered by the absence of a proper biochemical characterization, essential to identify the bioactive compounds present. The leaves from five species endemic to the Macaronesian islands with recognized ethnobotanical applications were analysed: Apollonias barbujana (Cav.) Bornm., Ocotea foetens (Ainton) Baill, Prunus azorica (Mouill.) Rivas-Mart., Lousã, Fern. Prieto, E. Días, J.C. Costa & C. Aguiar, Rumex maderensis Lowe and Plantago arborescens Poir. subsp. maderensis (Dcne.) A. Hans. et Kunk.. Since oxidative stress is a common feature of most diseases traditionally treated by these plants, it is important to assess their antioxidant capacity and determine the molecules responsible for this capacity. In this study, the antioxidant capacity of these plants against two of the most important reactive species in human body (hydroxyl and peroxyl radicals) was determined. To trace the antioxidant origin total phenol and flavonoid contents as well as the polyphenolic profile and the amount of trace elements were determined. There was a wide variation among the species analysed in what concerns their total leaf phenol and flavonoid contents. From the High Performance Liquid Chromatography (HPLC) electrochemically detected peaks it was possible to attribute to flavonoids the antioxidant capacity detected in A. barbujana, O. foetens, R. maderensis and P. azorica extracts. These potential reactive flavonoids were identified for A. barbujana, R. maderensis and P. azorica. For R. maderensis a high content (7 mg g-1 dry weight) of L-ascorbic acid, an already described antioxidant phytomolecule, was found. A high content in selenomethionine (414.35 μg g-1 dry weight) was obtained for P. arborescens subsp. maderensis extract. This selenocompound is already described as a hydroxyl radical scavenger is reported in this work as also possessing peroxyl radical scavenging capacity. This work is a good illustration of different phytomolecules (flavonoids, organic acids and selenocompounds), presents in leaves of the five traditional medicinal plants endemic to Macaronesia, all exhibiting antioxidant properties.

Evaluation of cardiovascular protective effect of different apple varieties - Correlation of response with composition

Epidemiological evidence supports the concept that diets rich in fruits and vegetables promote health and attenuate or delay the onset of cardiovascular disease (CVD). In particular, a reduced risk of CVD has been associated with apple consumption, probably due to the cholesterol-lowering effect of the main bioactive compounds, namely fibre and polyphenols. In this work, the effect of diet supplementation with 20% of three Portuguese apple cultivars (Bravo de Esmolfe, Malápio Serra and Golden), containing distinct phenolic and fibre concentrations, on serum lipid profile and oxLDL of male Wistar rats fed a cholesterol-enriched diet (2%) was evaluated. After 30 days, only Bravo de Esmolfe apple was able to decrease significantly serum levels of triglycerides, total and LDL cholesterol concentrations (reductions of 27.2%, 21.0% and 20.4%, respectively, in relation to the cholesterol-enriched diet group, P<0.05). The levels of oxLDL were also significantly improved with the consumption of this apple variety (reductions of 20.0% and 11.9%, in relation to the cholesterol-enriched diet group and control group, respectively, P>0.05) as well as with Malapio da Serra apple (reductions of 9.8% in relation to the cholesterol-enriched diet group, P<0.05). Correlation of the bioactive response with chemical composition showed that catechin, epicatechin, procyanidin B1 and β-carotene are the major phytocompounds responsible for the cholesterol lowering ability of apples. The antioxidant potential may have also contributed to this beneficial effect.

Phosphonium-based ionic liquids as modifiers for biomedical grade poly(vinyl chloride).

This work reports and discusses the influence of four phosphonium-based ionic liquids (PhILs), namely trihexyl(tetradecyl) phosphonium dicyanamide, [P(6,6,6,14)][dca]; trihexyl(tetradecyl) phosphonium bis(trifluoromethylsulfonyl)imide, [P(6,6,6,14)][Tf(2)N]; tetrabutyl phosphonium bromide, [P(4,4,4,4)][Br]; and tetrabutyl phosphonium chloride, [P(4,4,4,4)][Cl], on some of the chemical, physical and biological properties of a biomedical-grade suspension of poly(vinyl chloride) (PVC). The main goal of this work was to evaluate the capacity of these PhILs to modify some of the properties of neat PVC, in particular those that may allow their use as potential alternatives to traditional phthalate-based plasticizers in PVC biomedical applications. PVC films having different PhIL compositions (0, 5, 10 and 20 wt.%) were prepared (by solvent film casting) and characterised by Fourier transform infrared, thermogravimetric analysis, differential scanning calorimetry, dynamical mechanical thermal analysis, scanning electron microscopy/energy-dispersive X-ray/electron probe microanalysis, X-ray diffraction, transmittance, permeability towards oxygen and carbon dioxide, thermal degradation, contact angle measurement, water and vapour uptake, leachability and biocompatibility (haemolytic potential, thrombogenicity and cytotoxicity). A conventional organic plasticizer (di-isononyl phthalate) was used for comparison purposes. The results obtained showed that it was possible to change the neat PVC hydrophobicity, and consequently its water uptake capacity and plasticizer leachability, just by changing the PhIL employed and its composition. It was also possible to significantly change the thermal and mechanical properties of PVC films by choosing appropriate PhIL cation/anion combinations. However, a specific PhIL may not always be capable of simultaneously keeping and/or improving both physical properties. In addition, ionic halide salts were found to promote PVC dehydrochlorination. Finally, none of the prepared materials presented toxicity against Caco-2 cells, though pure [P(6,6,6,14)][dca] decreased HepG2 cells viability. Moreover, PVC films with [P(6,6,6,14)][dca] and [P(4,4,4,4)][Cl] were found to be haemolytic and thus these PhILs must be avoided as PVC modifiers if biomedical applications are envisaged. In conclusion, from all the PhILs tested, [P(6,6,6,14)][Tf(2)N] showed the most promising results regarding blood compatibility, leaching and permeability to gases of PVC films. The results presented are a strong indicator that adequate PhILs may be successfully employed as PVC multi-functional plasticizers for a wide range of potential applications, including those in the biomedical field.

Production of hybrid lipid-based particles loaded with inorganic nanoparticles and active compounds for prolonged topical release

The production of particulate hybrid carriers containing a glyceryl monostearate (Lumulse GMS-K), a waxy triglyceride (Cutina HR), silanized TiO(2) and caffeine were investigated with the aim of producing sunscreens with UV-radiation protection properties. Particles were obtained using the supercritical PGSS (Particles from Gas Saturated Solutions) technique. This method takes advantages of the lower melting temperatures of the lipids obtained from the dissolution of CO(2) in the bulk mixture. Experiments were performed at 13 MPa and 345 K, according to previous melting point measurements. Blends containing Lumulse GMS-K and Cutina HR lipids (50 wt%) were loaded with silanized TiO(2) and caffeine in percentile proportions of 6 and 4 wt%, respectively. The particles produced were characterized using several analytical techniques as follows: system crystallinity was checked by X-ray diffraction and differential scanning calorimetry, thermal stability by thermogravimetric analysis, and morphology by scanning and transmission electron microscopy. Further, the UV-shielding ability of TiO(2) after its dispersion in the lipidic matrix was assessed by solid UV-vis spectroscopy. Preliminary results indicated that caffeine-loaded solid lipid particles presented a two-step dissolution profile, with an initial burst of 60 wt% of the loaded active agent. Lipid blends loaded with TiO(2) and caffeine encompassed the UV-filter behavior of TiO(2) and the photoaging prevention properties of caffeine.

Solubility of coenzyme Q10 in supercritical carbon dioxide

Abstract The equilibrium solubility of coenzyme Q10 (CoQ10) in supercritical carbon dioxide (scCO2) was measured by a static analytical method in the pressure range from 9 to 26 MPa, at temperatures of 305, 313 and 323 K. The cosolvent effect of ethanol in the solubility of the bioactive compound in scCO2 has been investigated, at 15 MPa and 313 K. A preliminary study of the viability of extracting CoQ10 with scCO2 has been investigated at 15 MPa and 313 K, using the content of commercial pharmaceutical capsules as the solid matrix feed. The solubility data results were correlated by use of the empirical density-based Chrastil model.

Dense CO2 as a Solute, Co-Solute or Co-Solvent in Particle Formation Processes: A Review

The application of dense gases in particle formation processes has attracted great attention due to documented advantages over conventional technologies. In particular, the use of dense CO2 in the process has been subject of many works and explored in a variety of different techniques. This article presents a review of the current available techniques in use in particle formation processes, focusing exclusively on those employing dense CO2 as a solute, co-solute or co-solvent during the process, such as PGSS (Particles from gas-saturated solutions®), CPF (Concentrated Powder Form®), CPCSP (Continuous Powder Coating Spraying Process), CAN-BD (Carbon dioxide Assisted Nebulization with a Bubble Dryer®), SEA (Supercritical Enhanced Atomization), SAA (Supercritical Fluid-Assisted Atomization), PGSS-Drying and DELOS (Depressurization of an Expanded Liquid Organic Solution). Special emphasis is given to modifications introduced in the different techniques, as well as the limitations that have been overcome.

Impregnation of an intraocular lens for ophthalmic drug delivery.

In this work the possibility of impregnating P(MMA-EHA-EGDMA) with flurbiprofen using a clean and environmentally friendly technology, namely supercritical fluid technology was evaluated. P(MMA-EHA-EGDMA) has been proposed as a promising matrix to be used for intraocular delivery of anti-inflammatory drugs used in eye surgery and flurbiprofen is a non-steroidal anti-inflammatory agent. Fundamental studies like, the solubility of the drug in carbon dioxide, as well as the sorption degree of this polymeric matrix in the presence of carbon dioxide have been previously carried out. The aim of this research was to evaluate the effects of these two variables in the impregnation process. Different experimental conditions were tested and the results obtained suggest that the best impregnating conditions for this system are low temperatures and pressures, which at the same time correspond to a lower solubility of the drug in the supercritical fluid and a low swelling of the polymeric matrix. Experiments performed also indicate that the batch impregnation process leads to higher yields of impregnation and according to the release profiles obtained the drug can be released from the matrix up to three months, which presents great advantages for post-surgical treatments.