Catia Contado

TiO2 in Commercial Sunscreen Lotion: Flow Field-Flow Fractionation and ICP-AES Together for Size Analysis

A new method for determining the size of titanium dioxide particles is proposed and assayed in a commercial sunscreen product. Today many sun protection cosmetics incorporate physical UV filters as active ingredients, and there are no official methods for determining these compounds in sunscreen cosmetics. Here flow field-flow fractionation (FlFFF) has been tested, first to sort two different types of TiO2 nano- and microstandard materials (AeroxideTiO2 Degussa P-25 and TiO2 rutile 0.1-0.2-microm size) and then to fractionate TiO2 particles, extracted from a commercial sunscreen lotion. All the TiO2 FlFFF separations were detected by UV but during elution fractions were collected and their Ti content measured by inductively coupled plasma-atomic emission spectrometer (ICP-AES); the Ti concentration profiles obtained by ICP-AES were well correlated with the UV signals. The TiO2 particle mass-size distribution were calculated from the UV profiles. This methodology is relatively simple and rapid, and the sample treatment is as a whole easy and low cost.

Nanoparticulate lipid dispersions for bromocriptine delivery: characterization and in vivo study.

The physico-chemical properties and in vivo efficacies of two nanoparticulate systems delivering the antiparkinsonian drug bromocriptine (BC) were compared in the present study. Monoolein Aqueous Dispersions (MADs) and Nanostructured Lipid Carriers (NLCs) were produced and characterized. Cryogenic transmission electron microscopy (cryo-TEM) and X-ray diffraction revealed the morphology of MAD and NLC. Dimensional distribution was determined by Photon Correlation Spectroscopy (PCS) and Sedimentation Field Flow Fractionation (SdFFF). In particular, BC was shown to be encapsulated with high entrapment efficiency both in MAD and in NLC, according to SdFFF combined with HPLC. Two behavioral tests specific for akinesia (bar test) or akinesia/bradykinesia (drag test) were used to compare the effects of the different BC formulations on motor disabilities in 6-hydroxydopamine hemilesioned rats in vivo, a model of Parkinsons disease. Both free BC and BC-NLC reduced the immobility time in the bar test and enhanced the number of steps in the drag test, although the effects of encapsulated BC were longer lasting (5h). Conversely, BC-MAD was ineffective in the bar test and improved stepping activity in the drag test to a much lower degree than those achieved with the other preparations. We conclude that MAD and NLC can encapsulate BC, although only NLC provide long-lasting therapeutic effects possibly extending BC half-life in vivo.

Nanomaterials in consumer products: a challenging analytical problem

Many products used in everyday life are made with the assistance of nanotechnologies. Cosmetic, pharmaceuticals, sunscreen, powdered food are only few examples of end products containing nano-sized particles (NPs), generally added to improve the product quality. To evaluate correctly benefits vs. risks of engineered nanomaterials and consequently to legislate in favor of consumers protection, it is necessary to know the hazards connected with the exposure levels. This information implies transversal studies and a number of different competences. On analytical point of view the identification, quantification and characterization of NPs in food matrices and in cosmetic or personal care products pose significant challenges, because NPs are usually present at low concentration levels and the matrices, in which they are dispersed, are complexes and often incompatible with analytical instruments that would be required for their detection and characterization. This paper focused on some analytical techniques suitable for the detection, characterization and quantification of NPs in food and cosmetics products, reports their recent application in characterizing specific metal and metal-oxide NPs in these two important industrial and market sectors. The need of a characterization of the NPs as much as possible complete, matching complementary information about different metrics, possible achieved through validate procedures, is what clearly emerges from this research. More work should be done to produce standardized materials and to set-up methodologies to determine number-based size distributions and to get quantitative date about the NPs in such a complex matrices.

Characterisation of River Po particles by sedimentation field-flow fractionation coupled to GFAAS and ICP-MS

Abstract A procedure for elemental composition determination of water-borne river particles (Po River) on both size-fractionated and unfractionated submicron particles (0.1–1 μm) by graphite furnace atomic absorption spectroscopy (GFAAS) and inductively coupled plasma-mass spectrometry (ICP-MS) is reported. Sample fractionation was performed using sedimentation field-flow fractionation (SdFFF). The distribution of relative mass vs. particle size was determined using UV detection. Fractions were collected over a narrow size range for scanning electron microscopy. With this combination of techniques the mass, elemental composition, and shape distributions can be obtained across the size spectrum of the sample. The size distributions of the major elements (Al, Fe) were determined by coupling both GFAAS and ICP-MS techniques to the SdFFF. The procedure was validated using a reference clay sample. Satisfactory agreement was found between both the GFAAS and ICP-MS aluminium signal and the UV detector signal. Some discrepancies were observed in the Fe Al ratios when comparing GFAAS and ICP-MS. Thus further investigation is in order to fully assess the role of SdFFF-ICP-MS and SdFFF-GFAAS techniques for elemental characterisation of aquatic colloids. Both GFAAS and ICP-MS signals unambiguously indicate a significantly higher Fe content in the lower size range, which is consistent with previous investigations. Trace element levels in unfractionated Po River particles, determined by both GFAAS and ICP-MS, show good agreement. The high levels of Cu, Pb, Cr and Cd found associated with the colloidal particles underlines the significance of the environmental role played by the suspended matter in rivers in both highly industrialised and intensively cultivated areas.

Separation of particulate environmental samples by SPLITT fractionation using different operating modes

Abstract Procedures for gentle preseparation of particle suspensions prior to sedimentation field flow fractionation (SdFFF) analysis based on the use of Split-flow thin cell (SPLITT) fractionation (SF), were examined for isolating size fractions from both polydisperse standard silica samples and natural river particle samples. Two modes of SPLITT cell operation (conventional SF, full feed depletion SF (FFDSF)) are discussed and their performances compared. Recycling procedures for enhancing the resolution were tested and the degree of the separation attained was checked by optical microscopy and, in the case of the natural river particle samples, by coupling SdFFF with scanning electron microscopy (SEM) of the fractionated samples. The FFDSF has the advantage that no external dilution is introduced during the binary separation, so that the total sample concentration is unaffected and the separation obtained appears to be equally good for the two methods.

Clotrimazole nanoparticle gel for mucosal administration.

In this study a formulation suitable to be applied on oral and/or vaginal mucosa has been developed for the treatment of fungal infections. The aim of the research is a comparison between clotrimazole (CLO) containing semisolid formulations based on monoolein aqueous dispersion (MAD) or nanostructured lipid carrier (NLC). MAD and NLC have been characterized in terms of morphology and dimensional distribution by cryogenic Transmission Electron Microscopy (cryo-TEM) and Photon Correlation Spectroscopy (PCS). CLO was encapsulated with high entrapment efficiency both in MAD and in NLC, according to Sedimentation Field Flow Fractionation (SdFFF) combined with HPLC. CLO recovery in MAD and NLC has been investigated by time. In order to obtain formulations with suitable viscosity for mucosal application, MAD was diluted with a carbomer gel, while NLC was directly viscosized by the addition of poloxamer 407 in the dispersion. The rheological properties of MAD and NLC after viscosizing have been investigated. Franz cell has been employed to study CLO diffusion from the different vehicles, evidencing diffusion rates from MAD and NLC superimposable to that obtained using Canesten(®). An anticandidal activity study demonstrated that both CLO-MAD and CLO-NLC were more active against Candida albicans with respect to the pure drug.

Size characterization by Sedimentation Field Flow Fractionation of silica particles used as food additives.

Four types of SiO2, available on the market as additives in food and personal care products, were size characterized using Sedimentation Field Flow Fractionation (SdFFF), SEM, TEM and Photon Correlation Spectroscopy (PCS). The synergic use of the different analytical techniques made it possible, for some samples, to confirm the presence of primary nanoparticles (10 nm) organized in clusters or aggregates of different dimension and, for others, to discover that the available information is incomplete, particularly that regarding the presence of small particles. A protocol to extract the silica particles from a simple food matrix was set up, enriching (0.25%, w w(-1)) a nearly silica-free instant barley coffee powder with a known SiO2 sample. The SdFFF technique, in conjunction with SEM observations, made it possible to identify the added SiO2 particles and verify the new particle size distribution. The SiO2 content of different powdered foodstuffs was determined by graphite furnace atomic absorption spectroscopy (GFAAS); the concentrations ranged between 0.006 and 0.35% (w w(-1)). The protocol to isolate the silica particles was so applied to the most SiO2-rich commercial products and the derived suspensions were separated by SdFFF; SEM and TEM observations supported the size analyses while GFAAS determinations on collected fractions permitted element identification.

TiO2 nano- and micro-particles in commercial foundation creams: Field Flow-Fractionation techniques together with ICP-AES and SQW Voltammetry for their characterization

A procedure to determine the presence of nano- or micro- TiO2 particles in commercial cosmetic formulations, which may have a daily use, is proposed. Two identification techniques the Square Wave Voltammetry (SWV) and ICP-AES were employed to determine the amount of TiO2 in six foundation creams sold in Italy and the USA. A new SWV method, based on an acidic microwave-assisted digestion of the sample, has been set up and the results were compared and critically commented with those obtained by the established ICP-AES method. The analytical procedure was verified by analyzing the P-25 Degussa sample. The sizes of the particles contained in the foundations were investigated through Sedimentation (SdFFF) and Flow Field-Flow Fractionation (FlFFF) by analyzing aqueous slurries obtained from the foundation through a solvent extraction procedure. The FFF techniques synergically coupled with the ICP-AES made it possible to assess the sizes of the TiO2 particles. The content of the extracted slurries was also checked by TEM observation.

Size sorting of citrate reduced gold nanoparticles by sedimentation field-flow fractionation

Gold nanoparticles (GNPs) have been synthesized through the citrate reduction method; the citrate/gold(III) ratio was changed from 1:1 up to 10:1 and the size of the resulting nanoparticles was measured by sedimentation field-flow fractionation (SdFFF). Experimental data showed that the GNPs size decreases in the ratio range 1:1-3:1 and then increases from 5:1 to 10:1 passing through a plateau region in between, and is almost independent of the precursor solution concentrations. In the zone of minimum diameters the synthetic process does not produce monodispersed GNPs but often multiple distributions, very close in size, are observed as evidenced by the particle size distributions (PSDs) derived from the SdFFF fractograms. UV-vis spectrophotometry, being the most common technique employed in the optical characterization of nanoparticles suspensions, was used throughout this work. A confirmation of the nucleation-aggregation-fragmentation mechanism was inferred from the cross-correlation between UV-vis and SdFFF results.

Continuous split-flow thin cell and gravitational field-flow fractionation of wheat starch particles.

The combined employment of the SPLITT (split-flow thin) cell--a relatively new system for fast, continuous binary separation--and of gravitational field-flow fractionation (GrFFF)--a fractionation technique suitable for micron particle size distribution determination--was investigated for starch separation and characterization. Emphasis is placed on the main advantages of both techniques: operating under gentle earth gravity field, low cost and ease of maintenance. The reproducibility of GrFFF is demonstrated. Both the SPLITT separation and GrFFF fractionation results were checked by optical microscopy. Application examples of typical starch fractionation experiments are reported and discussed.