Cece Sumantri

Viability of bovine blastocysts obtained after 7, 8 or 9 days of culture in vitro following vitrification and one-step rehydration.

This study examined morphological appearance, viability and hatching rates in relation to the total cell number following vitrification of in vitro produced bovine blastocysts and expanded blastocysts. In Experiment 1, embryos obtained after 7, 8 or 9 d of culture were pooled and equilibrated in either 10% ethylene glycol (EG) or 10% EG plus 0.3M trehalose in Dulbeccos phosphate buffered saline (DPBS) supplemented with 10% calf serum and 0.6% BSA for 5 min each, at room temperature, and then vitrified together in precooled vitrification solutions consisting of 40% EG (Treatment 1), 40% EG plus 0.3M trehalose (Treatment 2), 40% EG plus 0.3M trehalose and 20% polyvinylpyrrolidone (PVP, Treatment 3) in DPBS. The embryo viability and hatching rates of Treatment 1 (19 and 3%) differed significantly (P < 0.05) from those of Treatment 2 (56 and 31%) and Treatment 3 (70 and 43%). There was a significant difference (P < 0.05) in embryo viability between Treatment 2 (31%) and Treatment 3 (43%). In Experiment 2, Day 7, 8 and 9 embryos were vitrified separately, with higher viability and hatching rates in Experiment 1 than in Experiment 2. The viabilities of Day 7 (87%), 8 (71%) and 9 (46%) embryos differed significantly (P < 0.05). Again, there were significant differences (P < 0.01) among the hatching rates of Day 7 (75%), 8 (38%) and 9 (9%) embryos. The total cell number of hatched blastocysts was then determined by differential fluorochrome staining. The total cell number of Day 7, 8 and 9 embryos differed significantly (P < 0.05).

Morphological classification of the ovaries in relation to the subsequent oocyte quality for IVF-produced bovine embryos

Although some inferences have been made regarding the morphological aspects of the ovaries in relation to the subsequent oocyte developmental competence in an in vitro system, the influence of ovarian morphology, taken as a pair, has yet to be demonstrated. The present study addresses this limitation. Forty pairs of ovaries from 5 morphological classes were examined to determine whether their characteristics could influence oocyte yield and developmental competence in vitro. An ovary was designated as bearing a corpus luteum (CL) with a dominant follicle (DF) a cyst (CY) or none of these structures (NO). Thus, the paired classes considered in this study consisted of 1) CL-NO 2) CL-DF 3) CL + DF-NO 4) NO-DF and 5) NO-NO. Comparisons were made among the members of 3 subgroups CL, NO and DF. Within the CL-subgroup, the pairs of CL-NO ovaries resulted in higher (P < 0.01) number of oocytes, cleavage rates and blastocyst formation per ovary than in the other categories (CL + DF-NO and CL-DF), with the latter being superior (P < 0.01) to that of CL + DF-NO in terms of cleavage rates. In the NO-subgroup, NO-CL pairs yielded higher (P < 0.01) rates of oocyte recovery and cleavage than the NO-DF pairs, and the latter was inferior (P < 0.05) to that of NO-NO ovaries for the 2 indices. Further, blastocyst rates from the NO-CL pairs was higher (P < 0.01) compared with those of NO-CL + DF, NO-DF, and NO-NO groups. And, in the DF-subgroup, the DF-CL pairs gave a higher (P < 0.05) oocyte yield and cleavage rate (P < 0.01) than the pairs of DF-NO ovaries but not significantly different in blastocyst formation. The overall oocyte recovery, cleavage and blastocyst rates for the 5 classes were, in a decreasing order CL-NO; NO-NO; CL-DF; CL + DF-NO; and DF-NO. Our results suggest that the morphological classification of ovarian pairs could be a useful means for predicting the developmental competence of oocytes in vitro, and that the presence of a dominant follicle in either one or both ovaries of a pair has a negative effect on the IVF-produced bovine embryos.

Development of a simple, portable carbon dioxide incubator for in vitro production of bovine embryos

The objective of this study was to develop a simple and portable CO2 incubator using effervescent granules (EG) and to examine the effect of negative and positive air pressure for in vitro maturation (IVM), fertilization (IVF) and culture (IVC) of bovine oocytes. In experiment 1, cumulus-oocyte complexes (COCs) were matured (22 h), fertilized (5 h) and cultured (7 days) using 0.25, 0.5 or 1.0 g of EG per 0.6 l added to maintain an optimum level of CO2 (approximately 3, 6 or 12%, respectively) for in vitro production of embryos. Control oocytes, zygotes and embryos were cultured in a standard CO2 incubator. The blastocyst production rates observed on Days 7 to 9 after insemination were 20.5+/-4.2%, 18.5+/-3.9% and 28.7+/-5.1% for the 0.25 g EG, 0.5 g EG treatments and control, respectively. These rates were significantly higher (P < 0.05) than that of the 1.0 g EG treatment (8.7+/-2.6%). The number of cells in the inner cell mass (ICM) and trophectoderm (TE) produced from blastocysts using the control procedure were 40.8+/-2.9 and 81.2+/-5.3, respectively, and were higher (P < 0.05) compared to the 0.50 g EG (34.6+/-2.9 and 66.8+/-5.7) and 1.0 g EG treatments (33.4+/-3.4 and 67.2+/-7.3). In experiment 2, COCs were placed in a small box with 0.25 g of EG so that the effects on IVM, IVF and IVC of positive or negative air pressure could be compared. The blastocyst production rate observed in the negative air pressure treatment (29.6+/-4.6%) was higher (P < 0.01) than that of the positive air pressure treatment (6.2+/-1.5%) or the normal treatment pressure (P < 0.05; 18.7+/-4.2%) but did not differ from that of the control (30.7+/-4.4%). These results indicate that this simple type of incubator with negative air pressure can be successfully used for in vitro production of bovine embryos and could be used at the field level.

The effect of sperm-oocyte incubation time on in vitro embryo development using sperm from a tetraparental chimeric bull

The present study was designed as 5 x 4 factorial to investigate the effects of using sperm from 5 bulls, and varied sperm-oocyte incubation times (5, 10, 15 and 20 h) on the fertilization, cleavage rates and blastocyst formation on an in vitro bovine embryo production system. The bulls included a tetraparental Chimera, its sires (Japanese Black and Limousin), its maternal grand-sires (Japanese Brown and Holstein). The proportion of polyspermy, 2-pronuclei formation, fertilization, cleavage and development to blastocyst were affected (P < 0.001) by the duration of sperm-oocyte incubation, as well as by the interaction between bulls and their corresponding sperm-oocyte incubation time. Blastocyst rate observed after 5 h in oocytes inseminated with Chimera, Japanese Black and Limousin were higher (p < 0.05) than those observed at 20 h incubation. The proportion of blastocysts from oocytes inseminated with Japanese Black observed at 10 h of incubation did not differ from that of Chimera, but both were higher (p < 0.05) than those observed for the Limousin, Japanese Brown and Holstein sires. The present study showed that there was an effect by the duration of sperm-oocyte incubation on in vitro embryo development. The optimal time of sperm-oocyte incubation for the Chimera was similar to that of its sires (Japanese Black and Limousin) but differed from its maternal grand-sires (Japanese Brown and Holstein). The fertilization rates for the sperm from the Holstein bull increased up to 15 h suggesting that this might be the only bull that would benefit from a long incubation period for insemination.

Fertility of sperm from a tetraparental Chimeric bull

The purpose of the present study was to examine the ability of a tetraparental Chimera in producing IVF embryos. Cumulus oocytes complexes (COCs) were matured in vitro for 22 h. Frozen-thawed sperm of a Chimera (CH), as well as Japanese Black (JB), Limousin (L), Japanese Brown (JBr), Holstein (H) bulls were used for IVF. The chromosome preparations were made from peripheral lymphocytes. Based on chromosome analysis the Chimera had apparently normal chromosomes (29 acrocentric pairs, one large sub metacentric X chromosome and one small sub metacentric Y chromosome). The proportion of acrosome reacted spermatozoa after 1 h incubation was higher (P < 0.01) with the Chimera (CH) than with the Holstein and in Japanese Brown bulls, but did not differ from Japanese Black and Limousin bull sperm (79.0%, 71.2%, 72.5%, 57.8% and 57.0% for CH, JB, L, JBr and H sperm, respectively). Fertilization rates observed after 5 h of sperm-oocyte incubation with Chimera (O-CH) sperm were higher (P < 0.05) than with Japanese Brown (O-JBr) and (P < 0.01) than with Holstein (O-H) sperm, but did not differ from Japanese Black (O-JB) and Limousin (O-L) sperm (36/44, 81.8%; 28/35, 80.0%; 25/36, 69.4%; 19/43, 44.2% and 6/33, 18.2% for O-CH, O-JB, O-L, O-JBr and O-H, respectively). The cleavage rates of IVM oocytes inseminated with Chimera sperm were also higher (P < 0.001) than in Holstein, (P < 0.01) Japanese Brown and (P < 0.05) Limousin, but did not differ from Japanese Black sperm (181/239, 75.7%; 123/171, 71.9%; 108/186, 58.1%; 80/196, 40.8% and 30/186, 16.1% for O-CH, O-JB, O-L, O-JBr and O-H, respectively). The blastocyst rates of IVM oocytes inseminated with sperm were higher (P < 0.05) than in Limousin, Japanese Brown and Holstein, but did not differ from Japanese Black (69/181, 38.1%; 48/123, 39.0%; 27/108, 25.0%; 7/30, 23.3% and 16/80, 17.8% for O-CH, O-JB, O-L, O-JBr and O-H, respectively). Three findings suggested the sperm from this tetraparental Chimeric bull were able to be used for producing bovine IVF embryos.

Development of a simple, portable carbon dioxide incubator for production of bovine IVF embryos

We have developed a simple, economical and portable C02 incubator for production of bovine IVF embryos in the field. The incubator consists of a metallic chamber (29L x 26W x 21 H em); the bottom plate of this chamber is electrically heated to maintain the chamber temperature between 38.5 and 40.0°C. Incubations are carried out in a small plastic box (15L x 10W x 4H em) placed inside this chamber. The cover of this box is transparent to view the culture dishes and has an inlet at one end. Immediately below this inlet, at the bottom of the box, is a plastic dish (3 em diameter) for placing effervescent granules. Distilled water (5 ml) is added through the inlet into the plastic dish containing effervescent granules to generate C02, and the inlet is capped with a silicone stopper to maintain constant C02 level inside the box. To examine the amount of effervescent granules that should be added to maintain an optimum C02 levels for successful in vitro production of embryos, 0.25, 0.5 and 1.0g of effervescent granules (Tartaric acid, 420 mg; Carbonated hydrogen natrium 460 mg; Silicone fiber 10 mg per g of effervescent granules) were tested. Blastocyst production rate and the number of ICM and trophectoderm cells of the blastocysts produced were compared among treatment groups, as well as with embryos developed in a Sanyo C02 incubator (Controi:Sanyo electric Co. L TO., Osaka, Japan). Procedures for in vitro maturation of oocytes, in vitro fertilization and in vitro culture of cleaved embryos were as reported previously (Suzuki et al., Theriogenology 34:1051, 1 990); and all step of IVM, IVF and IVC were done in both incubators. More than 250 immature oocytes were allocated at random to each treatment. lmmunosurgery and a differential staining techniques (Iwasaki et al., J. Reprod. Fertil. 90:279, 1 990) were used to determine ICM and trophectoderm cells. Results are shown in Table 1. The number of ICM and trophectoderm cells from blastocysts produced in the control group were 30.1 ±6.6 and 79.3±21.3, respectively and were not different (P>0.05) from the other groups. These results suggest that the simple incubator developed in our laboratory can be successfully used for production of bovine IVF embryos and could be used at the farm level.