Cédric Przybylski

HABA-based ionic liquid matrices for UV-MALDI-MS analysis of heparin and heparan sulfate oligosaccharides

Polysulfated carbohydrates such as heparin (HP) and heparan sulfate (HS) are not easily amenable to usual ultraviolet matrix-assisted laser desorption/ionization-mass spectrometry (UV-MALDI)-MS analysis due to the thermal lability of their O- and N-SO(3) moieties, and their poor ionization efficiency with common crystalline matrices. Recently, ionic liquid matrices showed considerable advantages over conventional matrices for MALDI-MS of acidic compounds. Two new ionic liquid matrices (ILMs) based on the combination of 2-(4-hydroxyphenylazo)benzoic acid (HABA) with 1,1,3,3-tetramethylguanidine and spermine were evaluated in the study herein. Both ILMs were successfully applied to the analysis of synthetic heparin oligosaccharides of well-characterized structures as well as to heparan sulfate-derived oligosaccharides from enzymatic depolymerization. HABA-based ILMs showed improved signal-to-noise ratio as well as a decrease of fragmentation/desulfation processes and cation exchange. Sulfated oligosaccharides were detected with higher sensitivity than usual crystalline matrices, and their intact fully O- and N-sulfated species [M-Na](-) were easily observed on mass spectra. MALDI-MS characterization of challenging analytes such as heparin octasaccharide carrying 8-O and 4 N-sulfo groups, and heparin octadecasulfated dodecasaccharide was successfully achieved.

Performance evaluation on a wide set of matrix‐assisted laser desorption ionization matrices for the detection of oligosaccharides in a high‐throughput mass spectrometric screening of carbohydrate depolymerizing enzymes

Compared to other analytical methods, matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) presents several unique advantages for the structural characterization of degradation products of carbohydrates. Our final goal is to implement this technique as a high-throughput platform, with the aim of exploring natural bio-diversity to discover new carbohydrate depolymerizing enzymes. In this approach, a variety of carbohydrates will be used as enzymes substrates and MALDI-MS will be employed to monitor the oligosaccharides produced. One drawback of MALDI, however, is that the choice of the matrix is largely dependent on the chemical properties of the analyte. In this context, our objective in the present work was to find the smallest set of MALDI matrices able to detect chemically heterogeneous oligosaccharides. This was done through the performance evaluation of more than 40 MALDI matrices preparations. Homogeneity of analyte-matrix deposits was considered as a critical feature, especially since the final objective is to fully automate the analyses. Evaluation of the matrices was done by means of a rigorous statistical approach. Amongst all tested compounds, our work proposes the use of the DHB/DMA ionic matrix as the most generic matrix, for rapid detection of a variety of polysaccharides including neutral, anionic, methylated, sulfated, and acetylated compounds. The selected matrices were then used to screen crude bacterial incubation media for the detection of enzymatic degradation products.

Evaluation of some parameters affecting troublesome pesticide analysis in gas chromatography–ion-trap mass spectrometry

Nowadays, multiresidue methods for pesticides monitoring in food commodities are commonly employed. It is also well known that the presence of several compounds from the matrix introduces a bias during the detection and the quantification steps. The so-called matrix effect phenomenon is related to the masking or formation of active sites. In GC, this phenomenon occurs in the injector port, and in the separative system (retention gap and/or analytical column) and also causes ionization potential modification of analytes. The main consequence of matrix effect is an increasing or decreasing analyte signal in the presence of the matrix (real sample) in respect to the same analyte in solvent (standard solution). In standard mixture, pesticides themselves interact with the active present sites among analytical chain from injector to the detector. Some matrix components, sometimes at trace amounts, are inevitably present in analyzed samples even after numerous and diverse clean-up procedures. In this paper, the influence of some analytical parameters on pesticide signal response is explored using gas chromatography with ion-trap mass-selective detection (GC-IT-MS). Moreover, the responses of characteristic troublesome analytes are analyzed in various kinds of matrices. Finally, matrix compound identification is initiated to study analyte-matrix relationship. Sample acidification with 0.1% acetic acid was the most appropriate for the majority of pesticides, while 0.1% formic acid was more suitable for base-sensitive ones (amitraz, imazalil, thiabendazole). Among tested calibration methods, matrix matched calibration provides the best results. In green bean matrix model, a matrix/pesticide ratio of 1/1 induces the best detected signal for almost every investigated analytes. Presence and quantity of some identified matrix co-extracted compounds like sterols could be partially a cause of signal enhancement.

Single molecule detection of glycosaminoglycan hyaluronic acid oligosaccharides and depolymerization enzyme activity using a protein nanopore.

Glycosaminoglycans are biologically active anionic carbohydrates that are among the most challenging biopolymers with regards to their structural analysis and functional assessment. The potential of newly introduced biosensors using protein nanopores that have been mainly described for nucleic acids and protein analysis to date, has been here applied to this polysaccharide-based third class of bioactive biopolymer. This nanopore approach has been harnessed in this study to analyze the hyaluronic acid glycosamiglycan and its depolymerization-derived oligosaccharides. The translocation of a glycosaminoglycan is reported using aerolysin protein nanopore. Nanopore translocation of hyaluronic acid oligosaccharides was evidenced by the direct detection of translocated molecules accumulated into the arrival compartment using high-resolution mass spectrometry. Anionic oligosaccharides of various polymerization degrees were discriminated through measurement of the dwelling time and translocation frequency. This molecular sizing capability of the protein nanopore device allowed the real-time recording of the enzymatic cleavage of hyaluronic acid polysaccharide. The time-resolved detection of enzymatically produced oligosaccharides was carried out to monitor the depolymerization enzyme reaction at the single-molecule level.

Analysis of Human C1q by Combined Bottom-up and Top-down Mass Spectrometry DETAILED MAPPING OF POST-TRANSLATIONAL MODIFICATIONS AND INSIGHTS INTO THE C1R/C1S BINDING SITES

C1q is a subunit of the C1 complex, a key player in innate immunity that triggers activation of the classical complement pathway. Featuring a unique structural organization and comprising a collagen-like domain with a high level of post-translational modifications, C1q represents a challenging protein assembly for structural biology. We report for the first time a comprehensive proteomics study of C1q combining bottom-up and top-down analyses. C1q was submitted to proteolytic digestion by a combination of collagenase and trypsin for bottom-up analyses. In addition to classical LC-MS/MS analyses, which provided reliable identification of hydroxylated proline and lysine residues, sugar loss-triggered MS3 scans were acquired on an LTQ-Orbitrap (Linear Quadrupole Ion Trap-Orbitrap) instrument to strengthen the localization of glucosylgalactosyl disaccharide moieties on hydroxylysine residues. Top-down analyses performed on the same instrument allowed high accuracy and high resolution mass measurements of the intact full-length C1q polypeptide chains and the iterative fragmentation of the proteins in the MSn mode. This study illustrates the usefulness of combining the two complementary analytical approaches to obtain a detailed characterization of the post-translational modification pattern of the collagen-like domain of C1q and highlights the structural heterogeneity of individual molecules. Most importantly, three lysine residues of the collagen-like domain, namely Lys59 (A chain), Lys61 (B chain), and Lys58 (C chain), were unambiguously shown to be completely unmodified. These lysine residues are located about halfway along the collagen-like fibers. They are thus fully available and in an appropriate position to interact with the C1r and C1s protease partners of C1q and are therefore likely to play an essential role in C1 assembly.

Quantitative analysis of protein complex constituents and their phosphorylation states on a LTQ-Orbitrap instrument.

Cellular functions are largely carried out by noncovalent protein complexes that may exist within the cell as stable modules or as assemblies of dynamically changing composition, whose formation and decomposition are triggered in response to extracellular stimuli. The protein constituents of complexes often exhibit post-translational modifications such as phosphorylation that can impact their ability to interact with other proteins and thus to form multicomponent complexes. A complete characterization of a particular protein complex thus requires determining both, the identity of interacting proteins and their covalent modifications, in terms of attachment sites and stoichiometry. We have previously developed a protocol which identifies genuine constituents of partially purified protein complexes and concurrently determines their phosphorylation sites and levels in a single LC-MS/MS analysis performed on a MALDI-TOF/TOF instrument (Pflieger, D.; Junger, M. A.; Muller, M.; Rinner, O.; Lee, H.; Gehrig, P. M.; Gstaiger, M.; Aebersold, R. Mol. Cell. Proteomics 2008 , 7 , 326 - 346). The method combines fourplex iTRAQ labeling (isobaric tags for relative and absolute quantification) and phosphatase treatment of peptide samples derived from the tryptic digestion of isolated complexes. To test the performances of this method with nanoESI and different peptide fragmentation modes, possibly better suited for the identification of phosphorylated sequences than MALDI-TOF/TOF-MS, we have implemented it on the nanoESI-LTQ-Orbitrap instrument. The model protein beta-casein was used to optimize the conditions with respect to sensitivity and quantitative accuracy: a combination of CID fragmentation in the linear ion trap and Higher energy Collision Dissociation (HCD) appeared optimal to obtain reliable and robust identification and quantification data. The optimized conditions were then applied to identify and estimate the respective levels of phosphorylation sites on the purified, autoactivated tyrosine kinase domain of Fibroblast Growth Factor Receptor 3 (FGFR3-KD) and to analyze complexes formed around the insulin receptor substrate homologue CHICO immunopurified from Drosophila melanogaster cells that were either stimulated with insulin or left untreated. These new analyses allowed us to improve the assignment of the phosphorylation sites of some peptides previously detected by MALDI-TOF/TOF analysis and to identify additional phosphorylated sequences in CHICO and in the insulin receptor.

HSulf sulfatases catalyze processive and oriented 6-O-desulfation of heparan sulfate that differentially regulates fibroblast growth factor activity

Sulfs are extracellular sulfatases that have emerged recently as critical regulators of heparan sulfate (HS) activities through their ability to catalyze specific 6‐O‐desulfation of the polysaccharide. Consequently, Sulfs have been involved in many physiological and pathological processes, and notably for Sulf‐2, in the development of cancers with poor prognosis. Despite growing interest, little is known about the structure and activity of these enzymes and the way they induce dynamic remodeling of HS 6‐O‐sulfation status. Here, we have combined an array of analytical approaches, including mass spectrometry, NMR, HS oligosaccharide sequencing, and FACS, to dissect HSulf‐2 sulfatase activity, either on a purified octasaccharide used as a mimic of HS functional domains, or on intact cell‐surface HS chains. In parallel, we have studied the functional consequences of HSulf‐2 activity on fibroblast growth factor (FGF)‐induced mitogenesis and found that the enzyme could differentially regulate FGF1 and FGF2 activities. Notably, these data supported the existence of precise 6‐O‐sulfation patterns for FGF activation and provided new insights into the saccharide structures involved. Altogether, our data bring to light an original processive enzymatic mechanism, by which HSulfs catalyze oriented alteration of HS 6‐O‐desulfation patterns and direct fine and differential regulation of HS functions.—Seffouh, A., Milz, F., Przybylski, C., Laguri, C., Oosterhof, A., Bourcier, S., Sadir, R., Dutkowski, E., Daniel, R., van Kuppevelt, T. H., Dierks, T., Lortat‐Jacob, H., Vivès, R. R. HSulf sulfatases catalyze processive and oriented 6‐O‐desulfation of heparan sulfate that differentially regulates fibroblast growth factor activity. FASEB J. 27, 2431–2439 (2013). www.fasebj.org

Capillary zone electrophoresis and capillary electrophoresis-mass spectrometry for analyzing qualitative and quantitative variations in therapeutic albumin.

The present study describes a reproducible and quantitative capillary zone electrophoresis (CZE) method, which leads to the separation of nine forms (native, oxidized and glycated) of human serum albumin (HSA). In an attempt to identify the different species separated by this CZE method, the capillary electrophoresis was coupled to mass spectrometry using a sheath liquid interface, an optimized capillary coating and a suitable CE running buffer. CE-MS analyses confirmed the heterogeneity of albumin preparation and revealed new truncated and modified forms such as Advanced Glycation End products (AGEs). Assignment of the CZE peaks was carried out using specific antibodies, carboxypeptidase A or sample reduction before or during the CE separation. Thus, five HSA forms were unambiguously identified. Using this CZE method several albumin batches produced by slightly different fractionation ways could be discriminated. Furthermore, analyses of HSA preparations marketed by five pharmaceutical industries revealed that two therapeutic albumins, including that marketed by LFB, contained the highest proportion of native form and lower levels of oxidized forms.

Discrimination of cyclic and linear oligosaccharides by tandem mass spectrometry using collision‐induced dissociation (CID), pulsed‐Q‐dissociation (PQD) and the higher‐energy C‐trap dissociation modes

RATIONALE Carbohydrates have essential functions in living organisms and cells, but, due to the presence of numerous linkage combinations, substituent sites and possible conformations, they are the class of biomolecules which exhibits the huge structural diversity found in nature. Thereby, due to such diversity and poor ionization, their structural deciphering by mass spectrometry is still a very challenging task. METHODS Here, we studied a series of linear and cyclic neutral oligosaccharides using electrospray with collision-induced dissociation (CID), pulsed-Q-dissociation (PQD) and the higher-energy C-trap dissociation (HCD) feature of a linear ion trap Orbitrap hybrid mass spectrometer (LTQ-Orbitrap). The collision energy necessary to obtain 50% fragmentation (CE(50) values) in CID, PQD and HCD was used to correlate both size and structures. RESULTS The default settings for activation time and/or activation Q are the most appropriate, except for HCD, where 100 ms instead of 30 ms gave more intense fragment ions. PQD exhibits a 2-8-fold lower sensitivity than CID. HCD provides signals closer or slightly superior by 1.5-fold than PQD, and offers a more balanced ion distribution through the spectrum. Furthermore, HCD offers the possibility to make fine adjustments of the energy via the eV scale to further increase the yield of low-mass fragments. CONCLUSIONS The complementarity of CID, PQD and HCD was clearly demonstrated by obtaining structural information on hexa-, hepta- and octasaccharides. Together, these results clearly indicate the usefulness of the CID/HCD pair for further structural deciphering, and analysis of more complex structures such as multi-antennary carbohydrates or glycoconjuguates alone or in mixture.

Identification of Novel PAMP-Triggered Phosphorylation and Dephosphorylation Events in Arabidopsis thaliana by Quantitative Phosphoproteomic Analysis

Signaling cascades rely strongly on protein kinase-mediated substrate phosphorylation. Currently a major challenge in signal transduction research is to obtain high confidence substrate phosphorylation sites and assign them to specific kinases. In response to bacterial flagellin, a pathogen-associated molecular pattern (PAMP), we searched for rapidly phosphorylated proteins in Arabidopsis thaliana by combining multistage activation (MSA) and electron transfer dissociation (ETD) fragmentation modes, which generate complementary spectra and identify phosphopeptide sites with increased reliability. Of a total of 825 phosphopeptides, we identified 58 to be differentially phosphorylated. These peptides harbor kinase motifs of mitogen-activated protein kinases (MAPKs) and calcium-dependent protein kinases (CDPKs), as well as yet unknown protein kinases. Importantly, 12 of the phosphopeptides show reduced phosphorylation upon flagellin treatment. Since protein abundance levels did not change, these results indicate that flagellin induces not only various protein kinases but also protein phosphatases, even though a scenario of inhibited kinase activity may also be possible.