Cengiz Tatar

Strontium substituted hydroxyapatites: Synthesis and determination of their structural properties, in vitro and in vivo performance.

The objective of this study is to present a detailed report related to the synthesis and characterization of strontium substituted hydroxyapatites. Based on this purpose, hydroxyapatite (HAp) bioceramics with different amounts of strontium (e.g., 0, 0.45, 0.90, 1.35, 1.80 and 2.25 at.%) were prepared using a sol-gel method. The effects of Sr substitution on the structural properties and biocompatibility of the samples were studied by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) techniques, in vitro and in vivo tests. All the samples composed of the nanoparticles ranging from 21 to 27 nm. The presence of Sr at low levels influenced the crystal size, crystallinity degree, lattice parameters and volume of the unit cell of the HAp. Both in vitro conditions and soaking period in simulated body fluid (SBF) significantly affected these properties. Especially, the (Ca+Sr)/P molar ratio gradually decreases with increasing soaking period in SBF. Animal experiments revealed the bone formation and osseointegration for all samples, and as compared with other groups, more reasonable, were observed for the sample with the lowest Sr content.

Thermoelastic transition kinetics of a gamma irradiated CuZnAl shape memory alloy

Many types of shape memory alloys have been used in nuclear reactors and aerospace applications where they are exposed to high levels of various kinds of radiation. The effect of gamma irradiation on the transformation kinetics of thermoelastic transformations in a shape memory CuZnAl alloy was investigated by differential scanning calorimetry (DSC) with heating/cooling rates of 10, 20, 30 and 40 °C/min. Irradiation doses of 10, 20, 30 and 40 kGy were applied to the samples of the alloy. Changes in Gibbs free energies, entropies and elastic energies were calculated. Reverse transition temperatures As and Af systematically decreased with increasing doses, although forward transition temperatures Ms and Mf underwent a minimum value at a dose of 20 kGy. Hysteresis in the transition temperatures changed as an inverse parabolic function of the irradiation dose. The activation energies of transformations were calculated by using Kissinger and Osawa methods.

Phase transformation kinetics and microstructure of NiTi shape memory alloy: effect of hydrostatic pressure

The effect of hydrostatic pressure on the behaviour of reverse and forward transformation temperatures and physical properties of NiTi shape memory alloy has been investigated. The transformation temperatures and physical properties of the alloy change with applied pressure. It has been clearly seen from differential scanning calorimetry that with the increase of applied pressure, while

Nano-crystalline aluminum-containing hydroxyapatite based bioceramics: synthesis and characterization

A_\mathrm{s},\, A_\mathrm{f}

Structural and dielectrical properties of Mg3–Ca3(PO4)2 bioceramics obtained from hydroxyapatite by sol–gel method

As,Af and

The effect of pressure on transformation temperatures and some physical parameters of Fe-32Mn-6Si-3Cr shape memory alloy

M_\mathrm{f}