Chakravarthy S. Gudipati

Time-dependent polymerization kinetic study and the properties of hybrid polymers with functional silsesquioxanes.

Methacrylate-functionalized cubic silsesquioxane homopolymers [p(MA-CSSQ)] were synthesized by reversible addition-fragmentation chain transfer (RAFT)-mediated living radical polymerization in the presence of dodecyl(dimethylacetic acid)trithiocarbonate (DDTA) chain transfer agent, and their polymerization kinetics were studied. The DDTA-terminated p(MA-CSSQ) was then employed as a macro-RAFT agent in the polymerization of methylmethacrylate (MMA) for the synthesis of a brushlike p(MA-CSSQ)-b-PMMA block copolymer. The kinetics study of p(MA-CSSQ) showed that the monomer to polymer conversion, evaluated by (1)H NMR, was found to be approximately 80% with the maximum number average molecular weight (M(n)) of 24000 and 32300 Da, for the [MA-CSSQ]/[DDTA] ratios of 100 and 200, respectively, as determined by gel permeation chromatography (GPC). The broadening of molecular weight distributions in p(MA-CSSQ) homopolymer GPC traces was observed, presumably due to the presence of the radical-radical termination products. The resultant homopolymer and block copolymer exhibited excellent thermal stability as evidenced by thermogravimetric and differential scanning calorimetric analyses. The surface properties of p(MA-CSSQ) homopolymer and p(MA-CSSQ)-b-PMMA block copolymer, determined by water contact angle and atomic force microscopy (AFM) measurements, strongly indicated the surface enrichment of the hydrophobic silsesquioxane groups. The AFM images showed the microsized granular domains of p(MA-CSSQ) homopolymer, whereas the islandlike phase-separated domains were observed in p(MA-CSSQ)-b-PMMA block copolymer.

Multilayer buildup and biofouling characteristics of PSS-b-PEG containing films

Thin films exhibiting protein resistance are of interest in diverse areas, ranging from low fouling surfaces in biomedicine to marine applications. Herein, we report the preparation of low protein and cell binding multilayer thin films, formed by the alternate deposition of a block copolymer comprising polystyrene sulfonate and poly(poly(ethylene glycol) methyl ether acrylate) (PSS-b-PEG), and polyallylamine hydrochloride (PAH). Film buildup was followed by quartz crystal microgravimetry (QCM), which showed linear growth and a high degree of hydration of the PSS-b-PEG/PAH films. Protein adsorption studies with bovine serum albumin using QCM demonstrated that multilayer films of PSS/PAH with a terminal layer of PSS-b-PEG were up to 5-fold more protein resistant than PSS-terminated films. Protein binding was dependent on the ionic strength at which the terminal layer of PSS-b-PEG was adsorbed, as well as the pH of the protein solution. It was also possible to control the protein resistance of the films by coadsorption of the final layer with another component (PSS), which showed an increase in protein resistance as the proportion of PSS-b-PEG in the adsorption solution was increased. In addition, protein resistance could also be controlled by the location of a single PSS-b-PEG layer within a PSS/PAH film. Finally, the buildup of PSS-b-PEG/PAH films on colloidal particles was demonstrated. PSS-b-PEG-terminated particles exhibited a 6.5-fold enhancement in cell binding resistance compared with PSS-terminated particles. The stability of PSS-b-PEG films combined with their low protein and cell binding characteristics provide opportunities for the use of the films as low fouling coatings in devices and other surfaces requiring limited interaction with biological interfaces.

Self-Assembly of Block Copolymer Micelles: Synthesis via Reversible Addition−Fragmentation Chain Transfer Polymerization and Aqueous Solution Properties

Poly(hexafluorobutyl methacrylate) (PHFBMA) homopolymer was synthesized by reversible addition-fragmentation chain transfer (RAFT)-mediated living radical polymerization in the presence of cyano-2-propyl dithiobenzoate (CPDB) RAFT agent. A block copolymer of PHFBMA-poly(propylene glycol acrylate) (PHFBMA-b-PPGA) with dangling poly(propylene glycol) (PPG) side chains was then synthesized by using CPDB-terminated PHFBMA as a macro-RAFT agent. The amphiphilic properties and self-assembly of PHFBMA-b-PPGA block copolymer in aqueous solution were investigated by dynamic and static light scattering (DLS and SLS) studies, in combination with fluorescence spectroscopy and transmission electron microscopy (TEM). Although PPG shows moderately hydrophilic character, the formation of nanosize polymeric micelles was confirmed by fluorescence and TEM studies. The low value of the critical aggregation concentration exhibited that the tendency for the formation of copolymer aggregates in aqueous solution was very high due to the strong hydrophobicity of the PHFBMA(145)-b-PPGA(33) block copolymer. The combination of DLS and SLS measurements revealed the existence of micellar aggregates in aqueous solution with an association number of approximately 40 +/- 7 for block copolymer micelles. It was also found in TEM observation that there are 40-50 micelles accumulated into one aggregate and these micelles are loosely packed inside the aggregate.

Synthesis and Self‐Assembly of pH‐Responsive Amphiphilic Poly(dimethylaminoethyl methacrylate)‐block‐Poly(pentafluorostyrene) Block Copolymer in Aqueous Solution

We report the synthesis of a novel pH-responsive amphiphilic block copolymer poly(dimethylaminoethyl methacrylate)-block-poly(pentafluorostyrene) (PDMAEMA-b-PPFS) using RAFT-mediated living radical polymerization. Copolymer micelle formation, in aqueous solution, was investigated using fluorescence spectroscopy, static and dynamic light scattering (SLS and DLS), and transmission electron microscopy (TEM). DLS and SLS measurements revealed that the diblock copolymers form spherical micelles with large aggregation numbers, N(agg)  ≈ 30 where the dense PPFS core is surrounded by dangling PDMAEMA chains as the micelle corona. The hydrodynamic radii, R(h) of these micelles is large, at pH 2-5 as the protonated PDMAEMA segments swell the micelle corona. Above pH 5, the PDMAEMA segments are gradually deprotonated, resulting in a lower osmotic pressure and enhanced hydrophobicity within the micelle, thus decreasing the R(h) . However, the radius of gyration, R(g) remains independent of pH as the dense PPFS cores predominate.

Synthesis, Multilayer Film Assembly, and Capsule Formation of Macromolecularly Engineered Acrylic Acid and Styrene Sulfonate Block Copolymers

We report the use of copolymers synthesized with specific block ratios of weakly and strongly charged groups for the preparation of stable, pH-responsive multilayers. In this study, we utilized reversible addition-fragmentation chain transfer (RAFT) polymerization in the synthesis of novel pH-sensitive copolymers comprising block domains of acrylic acid (AA) and styrene sulfonate (SS) groups. The PAA x- b-SS y copolymers, containing 37%, 55%, and 73% of AA groups by mass (denoted as PAA 37- b-SS 63, PAA 55- b-SS 45, and PAA 73- b-SS 27, respectively), were utilized to perform stepwise multilayer assembly in alternation with poly(allylamine hydrochloride), PAH. The ratio of AA to SS groups, and the effect of the pH of both anionic and cationic adsorption solutions, on multilayer properties, were investigated using ellipsometry and atomic force microscopy. The presence of SS moieties in the PAA x- b-SS y copolymers, regardless of the precise composition, lead to films with a relatively consistent thickness. Exposure of these multilayers to acidic conditions postassembly revealed that these multilayers do not exhibit the characteristic large swelling that occurs with PAA/PAH films. The film stability was attributed to the presence of strongly charged SS groups. PAA x- b-SS y/PAH films were also formed on particle substrates under various adsorption conditions. Microelectrophoresis measurements revealed that the surface charge and isoelectric point of these core-shell particles are dependent on assembly pH and the proportion of AA groups in PAA x- b-SS y. These core-shell particles can be used as precursors to hollow capsules that incorporate weak polyelectrolyte functionality. The role of AA groups in determining the growth profile of these capsules was also examined. The multilayer films prepared may find applications in areas where pH-responsive films are required but large film swelling is unfavorable.

Micelle Formation of Amphiphilic Polystyrene-b-poly(N-vinylpyrrolidone) Diblock Copolymer in Methanol and Water−Methanol Binary Mixtures

The micelle formation by the amphiphilic polystyrene-block-poly(N-vinylpyrrolidone) (PS48-b-PNVP99) copolymer is investigated in methanol and water-methanol binary mixtures of various compositions using 1H NMR, fluorescence spectroscopy, static/dynamic light scattering (SLS/DLS), and transmission electron microscopy (TEM). Critical micelle concentrations (cmc) are determined by employing fluorescence spectroscopy and DLS measurements. The cmc of the PS48-b-PNVP99 block copolymer increases with increasing methanol content in the water-methanol binary mixtures, suggesting that methanol is a better solvent for the PS48-b-PNVP99 block copolymer than water-methanol mixtures or pure water. The amphiphilic PS48-b-PNVP99 diblock copolymer forms spherical micelles of Rh approximately 16 nm in pure methanol solution as revealed by DLS measurements. In contrast, significantly larger micelles having higher aggregation numbers are formed in water-methanol binary mixtures. Temperature dependent data reveal an increase in aggregation number and radius of gyration (Rg) concomitantly with temperature (10-40 degrees C). In contrast, the overall size (Rh) of the micelles remains almost constant over the same temperature range. An explanation is tendered that PNVP coronas dehydrate/desolvate at higher temperatures counteracting the increase in micelle size (Rh) caused by increased aggregation numbers (Nagg).

Design, synthesis, and characterization of linear fluorinated poly(benzyl ether)s: A comparison study with isomeric hyperbranched fluoropolymers

A well-defined compositionally-equivalent linear analog to a previously reported hyperbranched fluoropolymer (HBFP) was synthesized and each was subjected to characterization studies as a fundamental investigation of the role of architecture on solution and solid-state properties. Condensation polymerization of 3-{[(tert-butyl)dimethylsilyl]oxy}-5-[(2′,3′,4′,5′,6′-pentafluoro)oxy]benzyl alcohol in the presence of an excess of elemental sodium dispersion, followed by removal of the TBDMS protecting group, and finally alkylation with 2,3,4,5,6-pentafluorobenzyl bromide afforded linear fluorinated poly(benzyl ether)s (LFP)s. Molecular weights were typically 7000 to 15000 Da (Mn) with molecular weight distributions of ca. 2, as determined by size exclusion chromatography. Confirmation of the isomeric structures of LFP and HBFP was made by 1H, 19F, and 13C NMR, and IR spectroscopies. Evaluation of the effects of molecular architecture on solution behavior were examined by solubility and 19F NMR diffusion measurements. There was no significant difference in solubility in a wide range of organic solvents. 19F NMR diffusion experiments measured diffusion coefficients of ca. 3 × 10−6 cm2 s−1 and estimated Stokes radii of 15–26 A, depending upon the solvent, regardless of polymer architecture. Differential scanning calorimetry and thermogravimetric analysis studies revealed similar thermolytic profiles with a glass transition temperature of 53 °C for both systems and thermal stability up to 290 °C. Our studies show that the difference in polymer architecture (linear versus hyperbranched) does not necessarily mandate obvious discrepancies in spectroscopic or solution behavior, although the molecular weights for these polymers were maintained at relatively low values.