Chang-Sang Cho

A Study on N2O Measurement Characteristics Using Photoacoustic Spectroscopy (PAS)

N2O, which is emitted mainly from nitrogen decomposition via bacteria, livestock manure, agricultural fertilizer use, fossil fuel combustion and waste incineration, is classified as a substance that causes significant destruction of the ozone layer. The N2O measurement methods for these emission sources may be divided into chromatography, optical, and electrical current measurements. Chromatography has been widely utilized for analyzing N2O. However, up until now, few studies have been conducted on N2O using photoacoustic spectroscopy. Therefore, this study aimed to evaluate performance of photoacoustic spectroscopy in this regard based on laboratory and field test results. The repeatability of photoacoustic spectroscopy was measured at 1.12%, which is lower than the repeatability of 3.0% suggested by the ISO 1564 standard, so, it has shown an excellent repeatability. The detection limit was determined to be 0.025 ppm, and the response time was confirmed to be 3 min and 26 s. The results of comparison between these measurements and GC show that the latter has superior accuracy, but mobility and convenience are superior for PAS. On the contrary, GC has a continuous measurement limitation, but PAS makes it possible to conduct continuous measurements. Therefore, PAS can be extremely useful to confirm the characteristics of N2O emissions and to quantify their amount.

Development of Methane and Nitrous Oxide Emission Factors for the Biomass Fired Circulating Fluidized Bed Combustion Power Plant

This study makes use of this distinction to analyze the exhaust gas concentration and fuel of the circulating fluidized bed (CFB) boiler that mainly uses wood biomass, and to develop the emission factors of Methane (CH4), Nitrous oxide (N2O). The fuels used as energy sources in the subject working sites are Wood Chip Fuel (WCF), RDF and Refused Plastic Fuel (RPF) of which heating values are 11.9 TJ/Gg, 17.1 TJ/Gg, and 31.2 TJ/Gg, respectively. The average concentrations of CH4 and N2O were measured to be 2.78 ppm and 7.68 ppm, respectively. The analyzed values and data collected from the field survey were used to calculate the emission factor of CH4 and N2O exhausted from the CFB boiler. As a result, the emission factors of CH4 and N2O are 1.4 kg/TJ (0.9–1.9 kg/TJ) and 4.0 kg/TJ (2.9–5.3 kg/TJ) within a 95% confidence interval. Biomass combined with the combustion technology for the CFB boiler proved to be more effective in reducing the N2O emission, compared to the emission factor of the CFB boiler using fossil fuel.