Changdong Deng

Research and Development of the AC Magnets for CSNS/RCS

Chinese Spallation Neutron Source (CSNS) is a facility planned to be built in China in the coming years. It is composed of 80 MeV Linac, 1.6 GeV Rapid Cycling Synchrotron (RCS) and target station. To accelerate the proton beam from 80 MeV to 1.6 GeV, the RCS requires the field of dipole and quadrupole magnets to change with sine waveform of 25 Hz plus a biased DC. For large amplitude AC magnets with large aperture, there are critical issues to be addressed, such as eddy current induced in the magnet yoke, coils and endplates, vibration of the yoke and coil, field tracking between dipoles and quadrupoles, and so on. To study these issues, one prototype dipole magnet and one prototype quadrupole magnet have been developed and tested. In this paper, the design, fabrication and tests of the two magnets will be described.

Dynamic Measurement System for Dipoles of RCS for CS

A dynamic measurement system was developed by the Institute of Modern Physics (IMP) for the dipole prototype of Rapid Cycle Synchrotron (RCS) of China Spallation Neutron Source (CSNS). The repetition frequency of RCS is 25 Hz. The probe is a moving arc searching-coil, and the data acquisition system is based on the dynamic analysis modular of National Instrument. To get the error of high order harmonics of the field at basic frequency, the hardware integrator is replaced by a high speed ADC with software filter and integrator. A series of harmonic coefficients of field are used to express the varieties of dynamic fields in space and time simultaneously. The measurement system has been tested in Institute of High Energy Physics (IHEP), and the property of the dipole prototype of RCS has been measured. Some measurement results and the repeatability of system are illustrated in this paper.