Changsheng Wang

Electrical conductance of conjugated oligomers at the single molecule level.

We determine and compare, at the single molecule level and under identical environmental conditions, the electrical conductance of four conjugated phenylene oligomers comprising terminal sulfur anchor groups with simple structural and conjugation variations. The comparison shows that the conductance of oligo(phenylene vinylene) (OPV) is slightly higher than that of oligo(phenylene ethynylene) (OPE). We find that solubilizing side groups do neither prevent the molecules from being anchored within a break junction nor noticeably influence the conductance value.

New electroluminescent bipolar compounds for balanced charge-transport and tuneable colour in organic light emitting diodes: triphenylamine–oxadiazole–fluorene triad molecules

This work describes bipolar 2,5-diaryl-1,3,4-oxadiazole–fluorene hybrids which incorporate triphenylamine or carbazole units within the π-electron system, viz. compounds 7, 8, 14 and 16. A related bipolar bis(oxadiazolyl)pyridine system 20 is reported. The syntheses of these five new materials are discussed, along with their optoelectronic absorption and emission properties, and their solution electrochemical redox properties. Anodic electropolymerisation of 20 was observed. Calculations using DFT (density functional theory) establish that they all possess a significantly higher HOMO energy level (by 0.60–1.02 eV) than 1,3-bis[2-(4-tert-butylphenyl)-1,3,4-oxadiazol-5-yl]benzene (OXD-7) due to the presence of electron-rich amine moieties and increased conjugation lengths, thereby leading to more balanced charge-transport characteristics. Devices were fabricated by spin-coating techniques using the bipolar compounds as the emitters in the simple device architecture ITO:PEDOT-PSS:X:Ca/Al (X = 7, 8, 14, 16 or 20). The turn-on voltages were 2.9, 5.5, 3.6, 4.5 and 3.4 V for the devices incorporating 7, 8, 14, 16 and 20, respectively. The highest external quantum efficiency (EQE) was observed for compound 7: viz. EQE 0.36%; current efficiency 1.00 cd A−1; power efficiency 0.56 lm W−1 at 5.7 V. The EQE of the device fabricated from 8 was considerably lower than for devices using other materials due to low light emission. The EL emission peaked at λmax 430, 487, 487 and 521 nm for 8, 14 and 16, and 7, respectively. For the 20 device λmax = 521 nm and 564 nm. Thus the HOMO–LUMO gap has been modified, allowing the colour of the emitted light to vary from light blue through to green by the systematic chemical modification of the molecular subunits. The high chemical and thermal durability of these materials combined with the simplicity of the device structure and low turn-on voltages offers considerable potential for OLED applications.

Identifying Diversity in Nanoscale Electrical Break Junctions

The realization of molecular-scale electronic devices will require the development of novel strategies for controlling electrical properties of metal/molecule/metal junctions, down to the single molecule level. Here, we show that it is possible to exert chemical control over the formation of metal/molecule...molecule/metal junctions in which the molecules interact by pi-stacking. The tip of an STM is used to form one contact, and the substrate the other; the molecules are conjugated oligophenyleneethynylenes (OPEs). Supramolecular pi-pi interactions allow current to flow through the junction, but not if bulky tert-butyl substituents on the phenyl rings prevent such interactions. For the first time, we find evidence that pi-stacked junctions can form even for OPEs with two thiol contacts. Furthermore, we find evidence for metal|molecule|metal junctions involving oligophenyleneethynylene monothiols, in which the second contact must be formed by the interaction of the pi-electrons of the terminal phenyl ring with the metal surface.

New 2,5-diaryl-1,3,4-oxadiazole–fluorene hybrids as electron transporting materials for blended-layer organic light emitting diodes

We describe the synthesis of 2,5-diaryl-1,3,4-oxadiazole–fluorene hybrid molecules, e.g. 2,7-bis[2-(4-tert-butylphenyl-1,3,4-oxadiazol-5-yl]-9,9-dihexylfluorene 6, 2,7-bis{4-[2-(4-tert-butylphenyl)-1,3,4-oxadiazol-5-yl]phenyl}-9,9-dihexylfluorene 10, 2,7-bis{4-[2-(4-dodecyloxyphenyl)-1,3,4-oxadiazol-5-yl]phenyl}-9,9-dihexylfluorene 11, 2,7-bis{4-[2-(4-dodecyloxyphenyl)-1,3,4-oxadiazol-5-yl]phenyl}-spirobifluorene 13 and analogue 16, comprising the 9,9-dihexylfluorene or spirobifluorene core units to which are attached aryl- or diaryl-oxadiazole units to provide linearly extended π-conjugated systems. The X-ray crystal structure is reported for compound 11. We have fabricated single-layer organic light-emitting diodes (OLEDs) using blends of poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) as the emissive material with the electron transport (ET) compounds 6, 10, 11, 13 and 16 added to enhance electron injection. For all the devices studied electroluminescence originates exclusively from the MEH-PPV material. The external quantum efficiencies of the devices increased with increasing concentration of the ET compound up to 95% by weight, and are greatly enhanced (>two orders of magnitude) compared to pure MEH-PPV reference devices. Further improvements have been achieved by adding a layer of PEDOT : PSS and efficiencies reach ca. 0.4% at 30 mA cm−2 for devices in the configuration ITO/PEDOT : PSS/MEH-PPV–13 (5 : 95% by weight)/Al.

Polymeric Alkoxy PBD [2-(4-Biphenylyl)-5-Phenyl-1,3,4-Oxadiazole] for Light-Emitting Diodes

The syntheses are reported of the title polymeric alkoxyPBD derivative 5 and the dipyridyl analogue 12 using Suzuki coupling reactions of 1,4-dialkoxybenzene-2,5-diboronic acid with 2,5-bis(4-bromophenyl)-1,3,5-oxadiazole, and its dipyridyl analogue, respectively. Thermal gravimetric analysis shows that polymers 5 and 12 are stable up to 370 C and 334 C, respectively. Films of polymer 5 spun from chloroform solution show an absorption at kmax = 367 nm, and a weaker band at 312 nm, and strong blue photoluminescence at kmax = 444 nm. The photoluminescence quantum yield (PLQY) was found to be 27 ‐ 3 %. For polymer 12, the absorption spectra reveal bands of equal intensity at kmax = 374 and 312 nm, with PL at kmax = 475 nm. Device studies using polymer 12 were hampered by its instability under illumination and/or electrical excitation. Polymer 5 is stable under these conditions and acts as an efficient electron-transporting/hole-blocking layer. For devices of configuration ITO/PEDOT/ MEH-PPV/polymer 5/Al an external quantum efficiency of 0.26 % and brightness of 800 cd/m 2 was readily achieved: orange emission was observed, identical to the MEH-PPV electroluminescence.

New pyrimidine- and fluorene-containing oligo(arylene)s: synthesis, crystal structures, optoelectronic properties and a theoretical study

New pyrimidine containing oligo(arylene)s, notably the pyrimidine-fluorene hybrid systems 13-16, have been synthesised by Suzuki cross-coupling methodology. An efficient synthesis of the key reagent 9,9-dihexylfluorene-2,7-diboronic acid 10 from 2,7-dibromo-9,9-dihexylfluorene 9 is reported. Cross-coupling of 10 with two equivalents of 2-bromopyrimidine, 5-bromopyrimidine and 2,5-dibromopyrimidine gave 2,7-bis(2-pyrimidyl)-9,9-dihexylfluorene 13. 2,7-bis(5-pyrimidyl)-9,9-dihexylfluorene 14 and 2,7-bis(5-bromo-2-pyrimidyl)-9,9-dihexylfluorene 15 in 23-34% yields. A further two-fold Suzuki reaction of benzeneboronic acid with compound 15 gave 2,7-bis(5-phenyl-2-pyrimidyl)-9,9-dihexylfluorene 16 (35% yield). Ab initio calculations of the geometries and electronic structures at the Hartree Fock (HF) and density functional theory (DFT) levels of theory are reported for compounds 13, 14 and 16 (with ethyl substituents replacing hexyl) and for their dipyrazinyl and bistetraazenyl analogues, 17, 18, 20 and 21. The heterocyclic nitrogen atoms of 13 and 16 facilitate planarisation of the system, compared to 14, which is in agreement with X-ray structural data obtained for 5-bromo-2-phenylpyrimidine 6, 2,5-diphenylpyrimidine 7 and compound 15. Bistetrazenyl derivative 21 is calculated to be a fully planar system. The cyclic voltammogram (CV) of compound 16 in dichloromethane solution shows a quasi-reversible oxidation wave at E(1/2)0 = +1.36 V (vs. Ag/Ag+). Compound 13 is a poorer donor with an oxidation observed at Epa = +1.50 V which is in good agreement with the difference in the energies of their HOMO orbitals calculated at both HF and DFT levels of theory (0.11-0.12 eV). For compound 14 we were not able to measure an Eox potential which should lie at much more positive potentials. Compounds 15 and 16 are blue emitters in solution, with photoluminescence quantum yields (PLQY) of 25% and 85%, respectively. For thin films of 16 the PLQY is reduced to 21%. An OLED using compound 16 as the emissive layer has been fabricated in the configuration ITO/PEDOT/16/Ca/Al: blue-green light (lambda max 500 nm) most likely emanating primarily from excimer states is emitted at a high turn-on voltage.

Variable contact gap single-molecule conductance determination for a series of conjugated molecular bridges

It is now becoming clear that the characteristics of the whole junction are important in determining the conductance of single molecules bound between two metal contacts. This paper shows through measurements on a series of seven conjugated molecular bridges that contact separation is an important factor in determining the electrical response of the molecular junction. These data are obtained using the I(t) method developed by Haiss et al since the scanning tunnelling microscope tip to substrate separation can be controlled through choice of the set-point (I(0)) current and calibrated with current-distance curves and knowledge of the terminal to terminal length of the molecular wire. The contact gap separation dependence is interpreted as arising from tilting of these molecules in the junction and this model is underpinned by ab initio transport computations. In this respect we make the general observation that conductance increases rather dramatically at higher tilt angle away from the normal for conformationally rigid molecular wires and that this increase in conductance arises from increased electronic coupling between the molecular bridge and the gold contacts.

Efficient intramolecular charge transfer in oligoyne-linked donor–π–acceptor molecules.

Studies are reported on a series of triphenylamine-(C[triple bond]C)(n)-2,5-diphenyl-1,3,4-oxadiazole dyad molecules (n=1-4, 1, 2, 3 and 4, respectively) and the related triphenylamine-C(6)H(4)-(C[triple bond]C)(3)-oxadiazole dyad 5. The oligoyne-linked D-pi-A (D=electron donor, A=electron acceptor) dyad systems have been synthesised by palladium-catalysed cross-coupling of terminal alkynyl and butadiynyl synthons with the corresponding bromoalkynyl moieties. Cyclic voltammetric studies reveal a reduction in the HOMO-LUMO gap in the series of compounds 1-4 as the oligoyne chain length increases, which is consistent with extended conjugation through the elongated bridges. Photophysical studies provide new insights into conjugative effects in oligoyne molecular wires. In non-polar solvents the emission from these dyad systems has two different origins: a locally excited (LE) state, which is responsible for a pi*-->pi fluorescence, and an intramolecular charge transfer (ICT) state, which produces charge-transfer emission. In polar solvents the LE state emission vanishes and only ICT emission is observed. This emission displays strong solvatochromism and analysis according to the Lippert-Mataga-Oshika formalism shows significant ICT for all the luminescent compounds with high efficiency even for the longer more conjugated systems. The excited-state properties of the dyads in non-polar solvents vary with the extent of conjugation. For more conjugated systems a fast non-radiative route dominates the excited-state decay and follows the Engelman-Jortner energy gap law. The data suggest that the non-radiative decay is driven by the weak coupling limit.

Electronic memory device based on a single-layer fluorene-containing organic thin film

The authors report on a simple bistable switching device based on a thin film of an electroactive polymer containing a fluorene group sandwiched between aluminum electrodes. No additional materials (e.g., metallic or semiconductive nanoparticles) are required for the devices to operate. This improves considerably the scalability of the memory elements at nanometer dimensions. The device operation is thought to depend on charge trapping at fluorenone defects within the organic film.

Synthesis and Crystal Structures of Isolable Terminal Aryl Hexatriyne and Octatetrayne Derivatives: Ar−(C≡C)nH (n = 3, 4)

Unprecedented stability has been observed in terminal aryl hexatriyne and terminal aryl octatetrayne derivatives by judicious choice of a bulky, nonplanar headgroup [viz., 4-(3,6-di- tert-butyl- N-carbazolyl)phenyl] which hinders topochemical intermolecular interactions in the crystal lattice.