Charles Cassidy

Norian SRS cement compared with conventional fixation in distal radial fractures. A randomized study.

BACKGROUND A prospective, randomized multicenter study was conducted to evaluate closed reduction and immobilization with and without Norian SRS (Skeletal Repair System) cement in the management of distal radial fractures. Norian SRS is a calcium-phosphate bone cement that is injectable, hardens in situ, and cures by a crystallization reaction to form dahllite, a carbonated apatite equivalent to bone mineral. METHODS A total of 323 patients with a distal radial fracture were randomized to treatment with or without Norian SRS cement. Stratification factors included fracture type (intra-articular or extra-articular), hand dominance, bone density, and the surgeons preferred conventional treatment (cast or external fixator). The subjects receiving Norian SRS underwent a closed reduction followed by injection of the cement percutaneously or through a limited open approach. Wrist motion, beginning two weeks postoperatively, was encouraged. Control subjects, who had not received a Norian SRS injection, underwent closed reduction and application of a cast or external fixator for six to eight weeks. Supplemental Kirschner wires were used in specific instances in both groups. Patients were followed clinically and radiographically at one, two, four, and between six and eight weeks and at three, six, and twelve months. Patients rated pain and the function of the hand with use of a visual analog scale. Quality of life was assessed with use of the Short Form-36 (SF-36) health status questionnaire. Complications were recorded. RESULTS Significant clinical differences were seen at six to eight weeks postoperatively, with better grip strength, wrist range of motion, digital motion, use of the hand, and social and emotional function, and less swelling in the patients treated with Norian SRS than in the control group (p < 0.05). By three months, these differences had normalized except for digital motion, which remained significantly better in the group treated with Norian SRS (p = 0.015). At one year, no clinical differences were detected. Radiographically, the average change in ulnar variance was greater in the patients treated with Norian SRS (+2.0 mm) than in the control group (+1.4 mm) (p < 0.02). No differences were seen in the total number of complications, including loss of reduction. The infection rate, however, was significantly higher (p < 0.001) in the control group (16.7%) than in the group treated with Norian SRS (2.5%) and the infections were always related to external fixator pins or Kirschner wires. Four patients with intra-articular extravasation of cement were identified; no sequelae were observed at twenty-four months. Cement was seen in extraosseous locations in 112 (70%) of the SRS-treated patients; loss of reduction was highest in this subgroup (37%). The extraosseous material had disappeared in eighty-three of the 112 patients by twelve months. CONCLUSIONS Our results indicate that fixation of a distal radial fracture with Norian SRS cement may allow for accelerated rehabilitation. A limited open approach and supplemental fixation with Kirschner wires are recommended. Additional or alternate fixation is necessary for complex articular fractures.

A reassessment of spinal stabilization in severe cerebral palsy

A homogenous population of 37 institutionalized patients with scoliosis and severe cerebral palsy was evaluated to assess the impact of spinal stabilization on comfort, function, health, and ease of nursing care. Through a prospective care-burden study, a 34-month retrospective analysis, and a healthcare worker questionnaire, 17 fused patients with a mean current scoliosis of 35 degrees were compared with 20 nonfused patients with a mean scoliosis of 76 degrees. No clinically significant differences were noted in pain or pulmonary medication utilization or therapy, decubiti, function, or time for daily care. Nevertheless, the majority of healthcare workers believed that the fused patients were more comfortable.

Rapidly advancing necrotizing fasciitis caused by photobacterium (vibrio) damsela : A hyperaggressive variant

ObjectiveTo describe the first case of Vibrio damsela necrotizing fasciitis in New England, emphasizing the importance of very early operative intervention to achieve source control in this extremely aggressive infection. DesignCase report. SettingSurgical intensive care unit at Tufts-New England Medical Center in Boston, MA. PatientA 69-yr-old retired fisherman with rapidly progressive necrotizing fasciitis from Photobacterium (Vibrio) damsela infection and ensuing multiple-system organ failure. InterventionsSurgical debridement, ventilator support, vasopressors, continuous veno-venous hemofiltration, and blood product transfusions. Measurements and Main ResultsDeath. ConclusionsA high index of suspicion is necessary for the diagnosis of this specific pathogen and concordant infection. The willingness to surgically debride and amputate without hesitation at a very early point may be the only intervention capable of saving the lives of patients affected by Photobacterium (Vibrio) damsela.

Total Joint Arthroplasty Surgery: Does Day of Surgery Matter?

Length of stay (LOS) after total joint arthroplasty (TJA) impacts the expense to the hospital. Our purpose was to evaluate the impact that day of surgery has on postoperative LOS. 547 patients who had a primary TJA at two tertiary care hospitals were identified retrospectively. TJA patients admitted on day of surgery and who had primary elective surgery were included in our sample. Patients were subdivided into one of four groups: those who had operations on Monday, Tuesday, Thursday, and Friday respectively. Patients who had surgery on Thursday and Friday had significantly longer LOS when compared to Monday and Tuesday. This variation in LOS between the groups may be due to inconsistencies in weekend functionality, less experienced part-time staffing, and inaccessibility of rehabilitation personnel.

New method of fixation of in-bone implanted prosthesis

This article presents results on the effectiveness of a new version of the titanium porous composite skin and bone integrated pylon (SBIP). The SBIP is designed for direct skeletal attachment of limb prostheses and was evaluated in a preclinical study with three rabbits. In accordance with the study protocol, a new version of the pylon (SBIP-3) was implanted into the hind leg residuum of three rabbits. The SBIP-3 has side fins that are designed to improve the bond between the bone and pylon. The fins are positioned inside two slots precut in the bone walls; their length can be adjusted to match the thickness of the bone walls. After 13 (animal 1) or 26 (animals 2 and 3) wk, the animals were sacrificed and samples collected for histopathological analysis. The space between the fins and the bone into which they were fit was filled with fibrovascular tissue and woven bone. No substantial inflammation was found. We suggest that if further studies substantiate the present results, the proposed method can become an alternative to the established technique of implanting prostheses into the medullary canal of the hosting bone.

Recording of Electric Signal Passing Through a Pylon in Direct Skeletal Attachment of Leg Prostheses With Neuromuscular Control

Direct recordings were made of electrical signals emanating from the muscles in a rabbits residuum. The signals were transmitted via wires attached on one end to the muscles, and on the other to an external recording system. The cable was held in a titanium tube inside a pylon that had been transcutaneously implanted into the residuums bone. The tube was surrounded by porous titanium cladding to enhance its bond with the bone and with the skin of the residuum. This study was the first known attempt to merge the technology of direct skeletal attachment of limb prostheses with the technology of neuromuscular control of prostheses, providing a safe and reliable passage of the electrical signal from the muscles inside the residuum to the outside recording system.

Factors Used by Program Directors to Select Hand Surgery Fellows

PURPOSE To identify factors and attributes hand surgery fellowship program directors consider important in selecting applicants for interview and ranking. METHODS A web-based questionnaire was sent to all hand fellowship program directors in the United States. The questionnaire was designed to identify the most important criteria in granting an interview, sources of letters of recommendation, the interview process, and factors used to rank a candidate. Each criterion was ranked in importance on a 1 to 5 Likert scale, with 1 being not important and 5 being critical. All responses were anonymous. The most important criterion for each section of the survey was determined by comparing the average Likert scores. RESULTS Fifty-two of 76 program directors responded (68%). The criteria with the highest mean Likert scores for offering an applicant an interview were, in order, quality letters of recommendation from hand surgeons, completion of an orthopedic surgery residency, comments regarding the applicants technical competence, applicant having an MD degree (as opposed to a DO degree), and residency program reputation. The letters of recommendation with the highest value were from the division chief of hand surgery and another hand surgeon in the division/department. The most important features of the interview were maturity of applicant, ability of applicant to articulate thoughts, ability to listen well, self-confidence, and relevant questions asked. The most important factors in ranking a candidate were applicant integrity, commitment to hard work, quality of letters of recommendation, quality of the interview, and ability to work well with other members of the hand surgery team. CONCLUSIONS There are identifiable factors considered important by hand surgery fellowship directors when selecting and ranking an applicant. This information may be valuable to medical students and residents contemplating careers in hand surgery.

Effect of applied force and blade speed on histopathology of bone during resection by sagittal saw

A sagittal saw is commonly used for resection of bone during joint replacement surgery. During sawing, heat is generated that can lead to an increase in temperature at the resected surface. The aim of this study was to determine the effect of applied thrust force and blade speed on generating heat. The effect of these factors and their interactions on cutting temperature and bone health were investigated with a full factorial Design of Experiments approach for two levels of thrust force, 15 N and 30 N, and for two levels of blade oscillation rate, 12,000 and 18,000 cycles per minute (cpm). In addition, a preliminary study was conducted to eliminate blade wear as a confounding factor. A custom sawing fixture was used to crosscut samples of fresh bovine cortical bone while temperature in the bone was measured by thermocouple (n=40), followed by measurements of the depth of thermal necrosis by histopathological analysis (n=200). An analysis of variance was used to determine the significance of the factor effects on necrotic depth as evidenced by empty lacunae. Both thrust force and blade speed demonstrated a statistically significant effect on the depth of osteonecrosis (p<0.05), while the interaction of thrust force with blade speed was not significant (p=0.22). The minimum necrotic depth observed was 0.50mm, corresponding to a higher level of force and blade speed (30 N, 18,000 cpm). Under these conditions, a maximum temperature of 93°C was measured at 0.3mm from the kerf. With a decrease in both thrust force and blade speed (15N, 12,000 cpm), the temperature in the bone increased to 109°C, corresponding to a nearly 50% increase in depth of the necrotic zone to 0.74 mm. A predictive equation for necrotic depth in terms of thrust force and blade speed was determined through regression analysis and validated by experiment. The histology results imply that an increase in applied thrust force is more effective in reducing the depth of thermal damage to surrounding bone than an increase in blade speed.

Spontaneous hemothorax in multiple exostoses: a case report and review of literature.

Abstract Multiple hereditary exostoses is a rare autosomal dominant disorder characterized by the growth of multiple osteochondromas. We describe the thoracoscopic remodeling of a spiculated costal exostotic lesion responsible for spontaneous recurrent hemothoraces in a 17-year-old male patient with multiple hereditary exostoses.

Comprehensive Look at Blood Transfusion Utilization in Total Joint Arthroplasty at a Single Academic Medical Center under a Single Surgeon

The utilization of autologous and allogeneic transfusions in total joint arthroplasties was to characterize patients who may benefit from giving preoperative blood donations. We conducted a retrospective chart review of 525 patients to document preoperative hematocrit, estimated blood loss, length of stay, transfusions, and medical comorbidities. Results of our review showed that total hip arthroplasty revision (THA-R) had the highest prevalence of transfusions (60%) followed by total hip arthroplasty (THA, 53%), total knee arthroplasty-revision (TKA-R, 33%), and total knee arthroplasty (TKA, 23%). There was significant waste of autologous donations: 92% of TKA patients, 64% of THA, and 33% of THA-R patients wasted on average 1.527, 1.321, and 1.5 autologous units, respectively. Pre-operative hematocrit was the strongest predictor of future transfusion need across all procedures, and primary THA had additional predictors in age and gender.