Charles De Cannière

Aboveground biomass mapping of African forest mosaics using canopy texture analysis: toward a regional approach.

In the context of the reduction of greenhouse gas emissions caused by deforestation and forest degradation (the REDD+ program), optical very high resolution (VHR) satellite images provide an opportunity to characterize forest canopy structure and to quantify aboveground biomass (AGB) at less expense than methods based on airborne remote sensing data. Among the methods for processing these VHR images, Fourier textural ordination (FOTO) presents a good method to detect forest canopy structural heterogeneity and therefore to predict AGB variations. Notably, the method does not saturate at intermediate AGB values as do pixelwise processing of available space borne optical and radar signals. However, a regional-scale application requires overcoming two difficulties: (1) instrumental effects due to variations in sun–scene–sensor geometry or sensor-specific responses that preclude the use of wide arrays of images acquired under heterogeneous conditions and (2) forest structural diversity including monodominant or open canopy forests, which are of particular importance in Central Africa. In this study, we demonstrate the feasibility of a rigorous regional study of canopy texture by harmonizing FOTO indices of images acquired from two different sensors (Geoeye-1 and QuickBird-2) and different sun–scene–sensor geometries and by calibrating a piecewise biomass inversion model using 26 inventory plots (1 ha) sampled across very heterogeneous forest types. A good agreement was found between observed and predicted AGB (residual standard error [RSE] = 15%; R2 = 0.85; P < 0.001) across a wide range of AGB levels from 26 Mg/ha to 460 Mg/ha, and was confirmed by cross validation. A high-resolution biomass map (100-m pixels) was produced for a 400-km2 area, and predictions obtained from both imagery sources were consistent with each other (r = 0.86; slope = 1.03; intercept = 12.01 Mg/ha). These results highlight the horizontal structure of forest canopy as a powerful descriptor of the entire forest stand structure and heterogeneity. In particular, we show that quantitative metrics resulting from such textural analysis offer new opportunities to characterize the spatial and temporal variation of the structure of dense forests and may complement the toolbox used by tropical forest ecologists, managers or REDD+ national monitoring, reporting and verification bodies.

Assessing atmospheric particulate matter distribution based on Saturation Isothermal Remanent Magnetization of herbaceous and tree leaves in a tropical urban environment

Particulate matter (PM) emissions, and the associated human health risks, are likely to continue increasing in urban environments of developing countries like Abidjan (Ivory Cost). This study evaluated the potential of leaves of several herbaceous and tree species as bioindicators of urban particulate matter pollution, and its variation over different land use classes, in a tropical area. Four species well distributed (presence frequencies >90%) over all land use classes, easy to harvest and whose leaves are wide enough to be easily scanned were selected, i.e.: Amaranthus spinosus (Amaranthaceae), Eleusine indica (Poaceae), Panicum maximum (Poaceae) and Ficus benjamina (Moraceae). Leaf sampling of these species was carried out at 3 distances from the road and at 3 height levels. Traffic density was also noted and finally biomagnetic parameters of these leaves were determined. Results showed that Saturation Isothermal Remanent Magnetization (SIRM) of leaves was at least 4 times higher (27.5×10(-6)A) in the vicinity of main roads and industrial areas than in parks and residential areas. The main potential sources of PM pollution were motor vehicles and industries. The slightly hairy leaves of the herbaceous plant A. spinosus and the waxy leaves of the tree F. benjamina showed the highest SIRM (25×10(-6)A). Leaf SIRM increased with distance to road (R(2)>0.40) and declined with sampling height (R(2)=0.17). The distance between 0 and 5m from the road seemed to be the most vulnerable in terms of PM pollution. This study has showed that leaf SIRM of herbaceous and tree species can be used to assess PM exposure in tropical urban environments.

Anthropisation et effets de lisière: impacts sur la diversité des rongeurs dans la Réserve forestière de Masako (Kisangani, R.D. Congo)

Nous avons évalué limpact anthropique sur la richesse, la diversité, labondance et la densité relative des Rongeurs dans quatre habitats de la Réserve de Masako au nord-est de la République Démocratique du Congo. Une forêt primaire à Gilbertiodendron dewevrei et trois habitats dorigine anthropique (forêt secondaire, jachère et zone de contact jachère/forêt secondaire (lisière)) ont été investigués de mai 2009 à avril 2010. 1275 spécimens répartis entre 24 espèces et 5 familles inventoriées ont permis de quantifier des différences de composition et dabondances entre un habitat non perturbé et des milieux anthropisés, ainsi quentre une lisière et des habitats adjacents. Nos résultats montrent une distribution non uniforme des Rongeurs dans les quatre milieux. La richesse et la diversité sont élevées en lisière et faibles en forêt primaire. Chaque milieu héberge une densité relative différente. Les plus fortes densités sont observées en forêt secondaire et jachère; la plus faible est observée en forêt primaire. Les abondances diffèrent significativement entre les habitats, à lexception de la paire forêt secondaire - jachère. Les paramètres dans la lisière diffèrent de ceux des habitats adjacents, traduisant lexistence dun effet de lisière. Les équitabilités faibles obtenues dans tous les habitats traduisent linstabilité relative de cet écosystème forestier. Le test de χ2 atteste lexistence de leffet « saison » sur les abondances des Rongeurs. De même, ce test confirme lexistence de leffet « activités anthropiques » sur les abondances dans les milieux anthropisés, mais pas en forêt primaire.

Height-diameter input data and R-code to fit and assess height-diameter models, from 'Field methods for sampling tree height for tropical forest biomass estimation' in Methods in Ecology and Evolution

1. Quantifying the relationship between tree diameter and height is a key component of efforts to estimate biomass and carbon stocks in tropical forests. Although substantial site-to-site variation in height-diameter allometries has been documented, the time consuming nature of measuring all tree heights in an inventory plot means that most studies do not include height, or else use generic pan-tropical or regional allometric equations to estimate height. 2. Using a pan-tropical dataset of 73 plots where at least 150 trees had in-field ground-based height measurements, we examined how the number of trees sampled affects the performance of locally-derived height-diameter allometries, and evaluated the performance of different methods for sampling trees for height measurement. 3. Using cross-validation, we found that allometries constructed with just 20 locally measured values could often predict tree height with lower error than regional or climate-based allometries (mean reduction in prediction error = 0.46 m). The predictive performance of locally-derived allometries improved with sample size, but with diminishing returns in performance gains when more than 40 trees were sampled. Estimates of stand-level biomass produced using local allometries to estimate tree height show no over- or under-estimation bias when compared with estimates using measured heights. We evaluated five strategies to sample trees for height measurement, and found that sampling strategies that included measuring the heights of the ten largest diameter trees in a plot outperformed (in terms of resulting in local height-diameter models with low height prediction error) entirely random or diameter size-class stratified approaches. 4. Our results indicate that even remarkably limited sampling of heights can be used to refine height-diameter allometries. We recommend aiming for a conservative threshold of sampling 50 trees per location for height measurement, and including the ten trees with the largest diameter in this sample.