Charlotte Cabanne

Antibody capture by mixed-mode chromatography: a comprehensive study from determination of optimal purification conditions to identification of contaminating host cell proteins.

We evaluated mixed mode chromatography for the capture of recombinant antibodies from CHO cell culture supernatants. We studied PPA HyperCel, HEA HyperCel, MEP HyperCel and Capto adhere resins, which all contain hydrophobic and cationic groups. A microplate approach combined with DoE modeling allowed the exploration of the complex behaviors of these mixed mode resins. Optimal conditions for antibody purification and host cell proteins (HCPs) elimination were determined and then directly up-scaled to laboratory columns. Then we used mass spectrometry to identify the major HCPs potentially coeluted with the antibody. Differences between the four resins in terms of amount, complexity and identity of the HCPs present in the elution fractions were investigated.

Direct Vpr-Vpr interaction in cells monitored by two photon fluorescence correlation spectroscopy and fluorescence lifetime imaging.

BackgroundThe human immunodeficiency virus type 1 (HIV-1) encodes several regulatory proteins, notably Vpr which influences the survival of the infected cells by causing a G2/M arrest and apoptosis. Such an important role of Vpr in HIV-1 disease progression has fuelled a large number of studies, from its 3D structure to the characterization of specific cellular partners. However, no direct imaging and quantification of Vpr-Vpr interaction in living cells has yet been reported. To address this issue, eGFP- and mCherry proteins were tagged by Vpr, expressed in HeLa cells and their interaction was studied by two photon fluorescence lifetime imaging microscopy and fluorescence correlation spectroscopy.ResultsResults show that Vpr forms homo-oligomers at or close to the nuclear envelope. Moreover, Vpr dimers and trimers were found in the cytoplasm and in the nucleus. Point mutations in the three α helices of Vpr drastically impaired Vpr oligomerization and localization at the nuclear envelope while point mutations outside the helical regions had no effect. Theoretical structures of Vpr mutants reveal that mutations within the α-helices could perturb the leucine zipper like motifs. The ΔQ44 mutation has the most drastic effect since it likely disrupts the second helix. Finally, all Vpr point mutants caused cell apoptosis suggesting that Vpr-mediated apoptosis functions independently from Vpr oligomerization.ConclusionWe report that Vpr oligomerization in HeLa cells relies on the hydrophobic core formed by the three α helices. This oligomerization is required for Vpr localization at the nuclear envelope but not for Vpr-mediated apoptosis.

Cation exchange versus multimodal cation exchange resins for antibody capture from CHO supernatants: Identification of contaminating Host Cell Proteins by mass spectrometry

We compared classical and multimodal cation exchange resins for the capture of recombinant antibodies from Chinese hamster ovary (CHO) cell culture supernatant. Both Capto S and Capto MMC resins present anionic groups while the multimodal Capto MMC also features a hydrophobic moiety. First we screened optimal binding and elution conditions in microplates with a pure antibody. We validated the results on the lab-scale with columns with a pure antibody and a CHO cell culture supernatant. Both resins achieved good yield and purity for the capture step of an antibody. However, the multimodal resin appeared more efficient and selective. Then we identified proteins in the antibody fraction by mass spectrometry in order to highlight the behavior of host cell proteins (HCPs).

Structure-activity relationship of human liver-expressed antimicrobial peptide 2.

Liver-expressed antimicrobial peptide 2 (LEAP-2) is a 40-residue cationic peptide originally purified from human blood ultrafiltrate. The native peptide contains two disulfide bonds and is unique regarding its primary structure. Its biological role is not known but a previous study showed that chemically synthesized LEAP-2 exhibited in vitro antimicrobial activities against several Gram-positive bacteria. In order to determine its antimicrobial mode of action, we expressed human recombinant LEAP-2 in Escherichia coli. Circular dichroism spectroscopy and nuclear magnetic resonance analyses showed that the structure of the recombinant peptide was identical to that of the chemically synthesized and oxidized LEAP-2, with two disulfide bonds between Cys residues in relative 1-3 and 2-4 positions. Minimal inhibitory concentration (MIC) of the recombinant human LEAP-2 was determined by a conventional broth dilution assay. It was found to be bactericidal against Bacillus megaterium at a 200microM concentration. Interestingly, the linear LEAP-2 had a greater antimicrobial activity with a MIC value of 12.5microM, which was comparable to that of magainin2. SYTOX Green uptake was used to assess bacterial membrane integrity. Linear LEAP-2 and magainin2 permeabilized B. megaterium membranes with the same efficiency, whereas oxidized LEAP-2 did not induce stain uptake. Binding of the peptides to plasmid DNA was evaluated by gel retardation assays. The DNA-binding efficacy of linear LEAP-2 was three times higher than that of the peptide-containing disulfide bridges. Altogether, these results show that the secondary structure of human LEAP-2 has a profound impact on its antibacterial activity.

Efficient purification of recombinant proteins fused to maltose-binding protein by mixed-mode chromatography

Two mixed-mode resins were evaluated as an alternative to conventional affinity resins for the purification of recombinant proteins fused to maltose-binding protein (MPB). We purified recombinant MBP, MBP-LacZ and MBP-Leap2 from crude Escherichia coli extracts. Mixed-mode resins allowed the efficient purification of MBP-fused proteins. Indeed, the quantity of purified proteins was significantly higher with mixed-mode resins, and their purity was equivalent to that obtained with affinity resins. By using purified MBP, MBP-LacZ and MBP-Leap2, the dynamic binding capacity of mixed-mode resins was 5-fold higher than that of affinity resins. Moreover, the recovery for the three proteins studied was in the 50-60% range for affinity resins, and in the 80-85% range for mixed-mode resins. Mixed-mode resins thus represent a powerful alternative to the classical amylose or dextrin resins for the purification of recombinant proteins fused to maltose-binding protein.

Purification process of recombinant monoclonal antibodies with mixed mode chromatography.

An innovative process to purify mAb from CHO cell culture supernatant was developed. This three-step process involved two mixed mode resins and an anion exchange membrane. We used a human IgG mixture to determine the optimal conditions for each purification step. Thereafter, the whole process was evaluated and improved for the purification of a recombinant mAb produced in the supernatant of CHO cells. Once optimized, yield and purity of 88% and 99.9%, respectively were comparable to those obtained in a conventional process based on a capture step using protein A. In addition, aggregates, HCPs and DNA levels in the purified fraction were below regulatory specifications. Then we used mass spectrometry to identify contaminating proteins in the antibody fraction in order to highlight the behavior of HCPs.

Expression and purification of short hydrophobic elastin-like polypeptides with maltose-binding protein as a solubility tag.

Elastin-like polypeptides (ELPs) are biodegradable polymers with interesting physico-chemical properties for biomedical and biotechnological applications. The recombinant expression of hydrophobic elastin-like polypeptides is often difficult because they possess low transition temperatures, and therefore form aggregates at sub-ambient temperatures. To circumvent this difficulty, we expressed in Escherichia coli three hydrophobic ELPs (VPGIG)n with variable lengths (n=20, 40, and 60) in fusion with the maltose-binding protein (MBP). Fusion proteins were soluble and yields of purified MBP-ELP ranged between 66 and 127mg/L culture. After digestion of the fusion proteins by enterokinase, the ELP moiety was purified by using inverse transition cycling. The purified fraction containing ELP40 was slightly contaminated by traces of undigested fusion protein. Purification of ELP60 was impaired because of co-purification of the MBP tag during inverse transition cycling. ELP20 was successfully purified to homogeneity, as assessed by gel electrophoresis and mass spectrometry analyses. The transition temperature of ELP20 was measured at 15.4°C in low salt buffer. In conclusion, this method can be used to produce hydrophobic ELP of low molecular mass.

Comparative study of strong anion exchangers: Structure-related chromatographic performances ☆

Chromatographic performances are highly influenced by operational parameters. New ion exchangers have tailored matrices providing low backpressure and allowing high flow velocity. By systematic frontal analysis and selectivity determination at different flow rates, we suggested an independent evaluation of major anion exchangers to facilitate media selection, and investigated the relationship between (i) surface modification and (ii) chromatographic performances. Structure-extended resins showed higher binding capacities compared to resins with conventional ligands directly attached to the matrix. Moreover, they maintained mainly high capacities even with extremely high flow velocities. Ligand accessibility was therefore largely enhanced, allowing proteins to interact and bind under harsh conditions. High throughput resins can be used for purification of high volume and high concentration feedstock in limited time. This results in higher productivity and could contribute to cost reduction.

A comprehensive evaluation of mixed mode interactions of HEA and PPA HyperCel™ chromatographic media.

Mixed mode or multimodal chromatography has been developed for rational use of multiple interactions in a controlled manner, in contrast to non-specific interactions. Indeed, as the term mixed mode suggests, these resins allow different types of interactions within a single chromatographic medium. In this paper, HEA HyperCel™, PPA HyperCel™ mixed-mode chromatographic media have been studied. These mixed-mode sorbents typically involve hydrophobic pseudo-affinity interactions for binding and essentially ionic interactions (charge repulsion) for elution. We identified and characterized these different interactions in chromatographic experiments by exploiting specific properties of proteins using protein standards and complex mixtures. We highlighted the major intervention of at least two types of interactions in these media: hydrophobic and electrostatic interactions. We observed the behaviour of these resins at different pH, ionic strength, with different salts and buffers types and in the presence of different organic compounds.

Recombinant production and purification of short hydrophobic Elastin-like polypeptides with low transition temperatures

Elastin-like polypeptides (ELPs) are biodegradable polymers with interesting physico-chemical properties for biomedical and biotechnological applications. We report herein the recombinant expression of three hydrophobic ELPs (VPGIG)n with variable lengths (nxa0=xa020, 40, 60) and sub-ambient transition temperatures. These ELPs were purified from the cytoplasmic soluble fraction of Escherichia coli by inverse transition cycling, and their exact molecular weight was confirmed by various mass spectrometry techniques. Transition temperatures of ELP20, ELP40, and ELP60 were measured at 18.6xa0°C, 12.4xa0°C and 11.7xa0°C, respectively.