Charlotte Yuk-Fan Ho

Optimal PWM Control of Switched-Capacitor DC–DC Power Converters via Model Transformation and Enhancing Control Techniques

This paper presents an efficient and effective method for an optimal pulsewidth-modulated (PWM) control of switched-capacitor dc-dc power converters. Optimal switching instants are determined based on minimizing the output ripple magnitude, the output leakage voltage and the sensitivity of the output load voltage with respect to both the input voltage and the load resistance. This optimal PWM control strategy has several advantages over conventional PWM control strategies: 1) it does not involve a linearization, so a large-signal analysis is performed; and 2) it guarantees the optimality. The problem is solved via both the model transformation and the optimal enhancing control techniques. A practical example of the PWM control of a switched-capacitor dc-dc power converter is presented.

Optimal design of nonuniform FIR transmultiplexer using semi-infinite programming

This correspondence considers an optimum nonuniform finite impulse response (FIR) transmultiplexer design problem subject to specifications in the frequency domain. Our objective is to minimize the sum of the ripple energy for all the individual filters, subject to the specifications on amplitude and aliasing distortions, and to the passband and stopband specifications for the individual filters. This optimum nonuniform transmultiplexer design problem can be formulated as a quadratic semi-infinite programming problem. The dual parametrization algorithm is extended to this nonuniform transmultiplexer design problem. If the lengths of the filters are sufficiently long and the set of decimation integers is compatible, then a solution exists. Since the problem is formulated as a convex problem, if a solution exists, then the solution obtained is unique, and the local solution is a global minimum.

Efficient Algorithm for Solving Semi-Infinite Programming Problems and Their Applications to Nonuniform Filter Bank Designs

An efficient algorithm for solving semi-infinite programming problems is proposed in this paper. The index set is constructed by adding only one of the most violated points in a refined set of grid points. By applying this algorithm for solving the optimum nonuniform symmetric/antisymmetric linear phase finite-impulse-response (FIR) filter bank design problems, the time required to obtain a globally optimal solution is much reduced compared with that of the previous proposed algorithm

Fuzzy Impulsive Control of High-Order Interpolative Low-Pass Sigma–Delta Modulators

In this paper, a fuzzy impulsive control strategy is proposed. The state vectors that the impulsive controller resets to are determined so that the state vectors of interpolative low-pass sigma-delta modulators (SDMs) are bounded within any arbitrary nonempty region no matter what the input step size, the initial condition and the filter parameters are, the occurrence of limit cycle behaviors and the effect of audio clicks are minimized, as well as the state vectors are close to the invariant set if it exists. To work on this problem, first, the local stability criterion and the condition for the occurrence of limit cycle behaviors are derived. Second, based on the derived conditions, as well as a practical consideration based on the boundedness of the state variables and a heuristic measure on the strength of audio clicks, fuzzy membership functions and a fuzzy impulsive control law are formulated. The controlled state vectors are then determined by solving the fuzzy impulsive control law. One of the advantages of the fuzzy impulsive control strategy over the existing linear control strategies is the robustness to the input signal, the initial condition and the filter parameters, and that over the existing nonlinear control strategy are the efficiency and the effectiveness in terms of lower frequency of applying the control force and higher signal-to-noise ratio (SNR) performance

Design of Interpolative Sigma Delta Modulators Via Semi-Infinite Programming

This correspondence considers the optimized design of interpolative sigma delta modulators (SDMs). The first optimization problem is to determine the denominator coefficients. The objective of the optimization problem is to minimize the passband energy of the denominator of the loop filter transfer function (excluding the dc poles) subject to the continuous constraint of this function defined in the frequency domain. The second optimization problem is to determine the numerator coefficients in which the cost function is to minimize the stopband ripple energy of the loop filter subject to the stability condition of the noise transfer function (NTF) and signal transfer function (STF). These two optimization problems are actually quadratic semi-infinite programming (SIP) problems. By employing the dual-parameterization method, global optimal solutions that satisfy the corresponding continuous constraints are guaranteed if the filter length is long enough. The advantages of this formulation are the guarantee of the stability of the transfer functions, applicability to design of rational infinite-impulse-response (IIR) filters without imposing specific filter structures, and the avoidance of iterative design of numerator and denominator coefficients. Our simulation results show that this design yields a significant improvement in the signal-to-noise ratio (SNR) and have a larger stability range, compared with the existing designs

Optimal Design of Cosine Modulated Nonuniform Linear Phase FIR Filter Bank via Both Stretching and Shifting Frequency Response of Single Prototype Filter

This paper designs an optimal cosine modulated nonuniform linear phase finite impulse response (FIR) filter bank. The frequency responses of all the analysis filters and the synthesis filters of the filter bank are derived based on both stretching and shifting the frequency response of a single prototype filter. The total aliasing error of the filter bank is minimized subject to specifications on the maximum magnitude distortion of the filter bank and the maximum ripple magnitudes of the prototype filter over both the passband and the stopband. This paper proposes a joint constraint transcription and modified filled function method for solving the optimization problem. In particular, the functional inequality constraints are converted to discrete constraints via the constraint transcription method. The globally optimal solution of the nonconvex optimization problem can be found efficiently via the modified filled function method. Computer numerical simulation results show that our design outperforms existing designs.

Global Convergence and Limit Cycle Behavior of Weights of Perceptron

In this paper, it is found that the weights of a perceptron are bounded for all initial weights if there exists a nonempty set of initial weights that the weights of the perceptron are bounded. Hence, the boundedness condition of the weights of the perceptron is independent of the initial weights. Also, a necessary and sufficient condition for the weights of the perceptron exhibiting a limit cycle behavior is derived. The range of the number of updates for the weights of the perceptron required to reach the limit cycle is estimated. Finally, it is suggested that the perceptron exhibiting the limit cycle behavior can be employed for solving a recognition problem when downsampled sets of bounded training feature vectors are linearly separable. Numerical computer simulation results show that the perceptron exhibiting the limit cycle behavior can achieve a better recognition performance compared to a multilayer perceptron.

Optimal Design of Magnitude Responses of Rational Infinite Impulse Response Filters

This correspondence considers a design of magnitude responses of optimal rational infinite impulse response (IIR) filters. The design problem is formulated as an optimization problem in which a total weighted absolute error in the passband and stopband of the filters (the error function reflects a ripple square magnitude) is minimized subject to the specification on this weighted absolute error function defined in the corresponding passband and stopband, as well as the stability condition. Since the cost function is nonsmooth and nonconvex, while the constraints are continuous, this kind of optimization problem is a nonsmooth nonconvex continuous functional constrained problem. To address this issue, our previous proposed constraint transcription method is applied to transform the continuous functional constraints to equality constraints. Then the nonsmooth problem is approximated by a sequence of smooth problems and solved via a hybrid global optimization method. The solutions obtained from these smooth problems converge to the global optimal solution of the original optimization problem. Hence, small transition bandwidth filters can be obtained

Design of nonuniform near allpass complementary FIR filters via a semi-infinite programming technique

In this correspondence, we consider the problem of designing a set of nonuniform near allpass complementary finite impulse response (FIR) filters. This problem can be formulated as a quadratic semi-infinite programming problem, where the objective is to minimize the sum of the ripple energy for the individual filters, subject to the passband and stopband specifications as well as to the allpass complementary specification. The dual parameterization method is used for solving the linear quadratic semi-infinite programming problem.

Representations of Linear Dual-Rate System Via Single SISO LTI Filter, Conventional Sampler and Block Sampler

In this brief, it is proved that a linear dual-rate system can be represented via a series cascade of: 1) a conventional expander, a single-input single-output (SISO) linear time-invariant (LTI) filter and a block decimator, or 2) a block expander, an SISO LTI filter and a conventional decimator. Hence, incompatible nonuniform filter banks could achieve perfect reconstruction via LTI filters, conventional samplers and block samplers without expanding the input-output dimension of a subsystem of linear dual-rate systems or converting the nonuniform filter banks to uniform filter banks. The main advantage of the proposed representations is to avoid complicated design of the circuit layout caused by connecting subsystems with large input-output dimension or a lot of subsystems together.