Chen-Fang Kang

Few-Layer MoS2 with High Broadband Photogain and Fast Optical Switching for Use in Harsh Environments

Few-layered MoS2 as Schottky metal-semiconductor-metal photodetectors (MSM PDs) for use in harsh environments makes its debut as two-dimensional (2D) optoelectronics with high broadband gain (up to 13.3), high detectivity (up to ~10(10) cm Hz(1/2)/W), fast photoresponse (rise time of ~70 μs and fall time of ~110 μs), and high thermal stability (at a working temperature of up to 200 °C). Ultrahigh responsivity (0.57 A/W) of few-layer MoS2 at 532 nm is due to the high optical absorption (~10% despite being less than 2 nm in thickness) and a high photogain, which sets up a new record that was not achievable in 2D nanomaterials previously. This study opens avenues to develop 2D nanomaterial-based optoelectronics for harsh environments in imaging techniques and light-wave communications as well as in future memory storage and optoelectronic circuits.

Solution-Grown Monocrystalline Hybrid Perovskite Films for Hole-Transporter-Free Solar Cells.

High-quality perovskite monocrystalline films are successfully grown through cavitation-triggered asymmetric crystallization. These films enable a simple cell structure, ITO/CH3 NH3 PbBr3 /Au, with near 100% internal quantum efficiency, promising power conversion efficiencies (PCEs) >5%, and superior stability for prototype cells. Furthermore, the monocrystalline devices using a hole-transporter-free structure yield PCEs ≈6.5%, the highest among other similar-structured CH3 NH3 PbBr3 solar cells to date.

Supersensitive, Ultrafast, and Broad-Band Light-Harvesting Scheme Employing Carbon Nanotube/TiO2 Core–Shell Nanowire Geometry

We demonstrate a novel, feasible strategy for practical application of one-dimensional photodetectors by integrating a carbon nanotube and TiO(2) in a core-shell fashion for breaking the compromise between the photogain and the response/recovery speed. Radial Schottky barriers between carbon nanotube cores and TiO(2) shells and surface states at TiO(2) shell surface regulate electron transport and also facilitate the separation of photogenerated electrons and holes, leading to ultrahigh photogain (G = 1.4 × 10(4)) and the ultrashort response/recovery times (4.3/10.2 ms). Additionally, radial Schottky junction and defect band absorption broaden the detection range (UV-visible). The concept using metallic core oxide-shell geometry with radial Schottky barriers holds potential to pave a new way to realize nanostructured photodetectors for practical use.

Surface effect on resistive switching behaviors of ZnO

The interaction between chemisorbed oxygen adatoms (O2(ad)−) and oxygen vacancies associated with the formation/rupture of conductive filaments dominates the switching yield of ZnO, which is also confirmed by the fact that the reduction of SET/RESET voltage with the temperature. The pronounced surface effect-induced conductivity lowering due to O2(ad)− chemisorption leads to increased resistance of high resistance state (HRS). The current decay of the HRS with increased temperatures/times is owing to the severe O2(ad)− chemisorption as Joule heating is continuously applied. The statistical analysis for over 400 cells provides essential evidence for evaluating the surface effect on resistive switching.

Schottky junctions on perovskite single crystals: light-modulated dielectric constant and self-biased photodetection

Schottky junctions formed between semiconductors and metal contacts are ubiquitous in modern electronic and optoelectronic devices. Here we report on the physical properties of Schottky-junctions formed on hybrid perovskite CH3NH3PbBr3 single crystals. It is found that light illumination can significantly increase the dielectric constant of perovskite junctions by 2300%. Furthermore, such Pt/perovskite junctions are used to fabricate self-biased photodetectors. A photodetectivity of 1.4 × 1010 Jones is obtained at zero bias, which increases to 7.1 × 1011 Jones at a bias of +3 V, and the photodetectivity remains almost constant in a wide range of light intensity. These devices also exhibit fast responses with a rising time of 70 μs and a falling time of 150 μs. As a result of the high crystal quality and low defect density, such single-crystal photodetectors show stable performance after storage in air for over 45 days. Our results suggest that hybrid perovskite single crystals provide a new platform to develop promising optoelectronic applications.

Hierarchical structures consisting of SiO2 nanorods and p-GaN microdomes for efficiently harvesting solar energy for InGaN quantum well photovoltaic cells.

We experimentally and theoretically demonstrated the hierarchical structure of SiO(2) nanorod arrays/p-GaN microdomes as a light harvesting scheme for InGaN-based multiple quantum well solar cells. The combination of nano- and micro-structures leads to increased internal multiple reflection and provides an intermediate refractive index between air and GaN. Cells with the hierarchical structure exhibit improved short-circuit current densities and fill factors, rendering a 1.47 fold efficiency enhancement as compared to planar cells.

Eliminating surface effects via employing nitrogen doping to significantly improve the stability and reliability of ZnO resistive memory

Metal oxides suffering from oxygen molecule chemisorption display environment-dependent metastability, leading to unstable resistive memory characteristics and performance degradation. To obtain ambient-independent characteristics, we introduced nitrogen into ZnO resistive memory devices, compensating for the native defects and suppressing oxygen chemisorption, giving rise to a significant improvement in switching behavior without undesired surface effects. Moreover, by thermal activation of the nitrogen doping via annealing, an increased yield ratio from 50% to 82%, a reduced current compliance from 15 mA to 5 mA, and more stable cycling endurance are obtained. Our findings give physical insight into designing resistive memory devices.

In Situ TEM and Energy Dispersion Spectrometer Analysis of Chemical Composition Change in ZnO Nanowire Resistive Memories

Resistive random-access memory (ReRAM) has been of wide interest for its potential to replace flash memory in the next-generation nonvolatile memory roadmap. In this study, we have fabricated the Au/ZnO-nanowire/Au nanomemory device by electron beam lithography and, subsequently, utilized in situ transmission electron microscopy (TEM) to observe the atomic structure evolution from the initial state to the low-resistance state (LRS) in the ZnO nanowire. The element mapping of LRS showing that the nanowire was zinc dominant indicating that the oxygen vacancies were introduced after resistance switching. The results provided direct evidence, suggesting that the resistance change resulted from oxygen migration.

Efficiency enhancement of InGaN multi-quantum-well solar cells via light-harvesting SiO2 nano-honeycombs

Periodic sub-wavelength SiO2 nano-honeycombs are fabricated on GaN-based multiple quantum well solar cells by self-assembly polystyrene nanosphere lithography and reactive ion etching. The nano-honeycombs are found to be effective in suppressing the undesired surface reflections over a wide range of wavelengths. Under the illumination of air mass 1.5G solar simulator, conversion efficiency of the solar cell is enhanced by 24.4%. Simulations based on finite-difference time-domain method indicate that the improved performances result from the enhanced optical absorption in the active region due to the reflection suppression and enhanced forward scattering.

Resistive memory for harsh electronics: immunity to surface effect and high corrosion resistance via surface modification.

The tolerance/resistance of the electronic devices to extremely harsh environments is of supreme interest. Surface effects and chemical corrosion adversely affect stability and operation uniformity of metal oxide resistive memories. To achieve the surrounding-independent behavior, the surface modification is introduced into the ZnO memristors via incorporating fluorine to replace the oxygen sites. F-Zn bonds is formed to prevent oxygen chemisorption and ZnO dissolution upon corrosive atmospheric exposure, which effectively improves switching characteristics against harmful surroundings. In addition, the fluorine doping stabilizes the cycling endurance and narrows the distribution of switching parameters. The outcomes provide valuable insights for future nonvolatile memory developments in harsh electronics.