Chengsheng Jia

Characterization of odor-active compounds of various cherry wines by gas chromatography-mass spectrometry, gas chromatography-olfactometry and their correlation with sensory attributes.

To characterize the aroma of cherry wine, five samples were analyzed by quantitative descriptive sensory analysis, gas chromatography-mass spectrometry (GC-MS) and gas chromatography-olfactometry (GC-O). The aroma of cherry wines was described by 6 sensory terms as fruity, sour, woody, fermentation, cameral and floral. Fifty-one odor-active (OA) compounds were detected by GC-O and quantified by GC-MS, and 45 of them were identified. Twenty-nine OA compounds having more than 50% detection frequency were selected as specific compounds correlated to sensory attributes by partial least squares regression (PLSR). The correlation result showed ethyl 2-methyl propionate, 2,3-butanedione, ethyl butyrate, ethyl pentanoate, 3-methyl-1-butanol, ethyl hexanoate, 3-hydroxy-2-butanone, ethyl lactate, 1-hexanol, (Z)-3-hexen-1-ol, ethyl hydroxyacetate, acetic acid, furfural, 2-ethyl-1-hexanol, benzaldehyde, propanoic acid, butanoic acid, guaiacol, beta-citronellol, hexanoic acid, 2-methoxy-4-methylphenol, 2-ethyl-3-hydroxy-4H-pyran-4-one, ethyl cinnamate, 2-methoxy-4-vinylphenol were typical OA compounds, which covaried with characteristic aroma of cherry wines.

Effect of processing parameters on the formation of spherical multinuclear microcapsules encapsulating peppermint oil by coacervation.

The gelatin/gum arabic multinuclear microcapsules encapsulating peppermint oil were prepared by coacervation. The effect of various processing parameters, including the core/wall ratio, wall material concentration, pH value, as well as stirring speed on the morphology, particle size distribution, yield and loading was investigated. When the wall material concentration or the core/wall ratio increased, the morphology of multinuclear microcapsules changed from spherical to irregular and the average particle size increased, the optimal wall material concentration and the core/wall ratio were 1% and 2:1, respectively. The multinuclear spherical microcapsules with desired mean particle size can be manufactured by modulating the pH value and stirring speed. The ideal preparation conditions were pH 3.7 at 400 rpm of stirring speed. The yield of multinuclear microcapsules encapsulating peppermint oil by coacervation was ∼90% and the processing parameters had very slight influence on the yield. When transglutaminase was used as the cross-linker instead of formaldehyde, morphology, mean particle size, yield and loading remained the same as that hardening with formaldehyde, but the particle size distribution became narrower.

Transglutaminase cross-linking effect on sensory characteristics and antioxidant activities of Maillard reaction products from soybean protein hydrolysates.

To improve the yield of Maillard peptides, a microbial transglutaminase (MTGase) was used to increase the content of 1000-5000Da peptides in soybean protein hydrolysates by using a cross-linking reaction. The sensory characteristics and antioxidant activities of corresponding Maillard Reaction Products (MSPC) was then evaluated. After cross-linking treatment the content of 1000-5000Da peptides in protein hydrolysates and the yield of Maillard peptides increased by 21.19% and 8.71%, respectively, which contributed to the improved mouthfulness of MSPC. The bitter amino acids were significantly decreased and the umami acids were markedly increased in MSPC. Volatile compounds identified by GC-MS analysis showed that the content of the important meaty flavour compounds (such as 2-methyl-3-furanthiol, bis(2-methyl-3-furyl)disulfide) of MSPC were dramatically higher than that of MRPs from uncross-linking peptides. Combined with sensory evaluation, it was confirmed that MTGase cross-linking improved the flavour Characteristics and did not affect the antioxidant activity of MSPC.

Contribution of beef base to aroma characteristics of beeflike process flavour assessed by descriptive sensory analysis and gas chromatography olfactometry and partial least squares regression

Descriptive sensory analysis and gas chromatography-mass spectrometry (GC-MS) analysis were conducted to investigate changes in aroma characteristics of beeflike process flavours (BPFs) prepared from enzymatically hydrolyzed beef (beef base) of different DH (degree of hydrolysis) with other ingredients. Five attributes (beefy, meaty, simulate, mouthful and roasted) were selected to assess BPFs. The results of descriptive sensory analysis confirmed that BPF2 from beef base of moderate DH 29.13% was strongest in beefy, meaty and simulate characteristics; BPF4 and BPF5 from beef base of higher DH (40.43% and 44.22%, respectively) were superior in mouthful and roasted attributes respectively; while BPF0 without beef base gave weaker odour for all attributes. Twenty six compounds from GC-MS were selected as specific compounds to represent beef odour based on their odour-active properties assessed by a detection frequency method of GC-O and correlation of their contents with sensory attributes intensity. Correlation analysis of molecular weight (MW) of peptides, odour-active compounds and sensory attributes through partial least squares regression (PLSR) further explained that beef base with DH of 29.13% was a desirable precursor for imparting aroma characteristics of beeflike process flavour.

Stable nanoparticles prepared by heating electrostatic complexes of whey protein isolate-dextran conjugate and chondroitin sulfate.

A simple and green method was developed for preparing the stable biopolymer nanoparticles with pH and salt resistance. The method involved the macromolecular crowding Maillard process and heat-induced gelation process. The conjugates of whey protein isolate (WPI) and dextran were produced by Maillard reaction. The nanoparticles were fabricated by heating electrostatic complexes of WPI-dextran conjugate and chondroitin sulfate (ChS) above the denaturation temperature and near the isoelectric point of WPI. Then, the nanoparticles were characterized by spectrophotometry, dynamic laser scattering, zeta potential, transmission electron microscopy, atomic force microscopy, and scanning electron microscopy. Results showed that the nanoparticles were stable in the pH range from 1.0 to 8.0 and in the presence of high salt concentration of 200 mM NaCl. WPI-dextran conjugate, WPI, and ChS were assembled into the nanoparticles with dextran conjugated to WPI/ChS shell and WPI/ChS core. The repulsive steric interactions, from both dextran covalently conjugated to WPI and ChS electrostatically interacted with WPI, were the major formation mechanism of the stable nanoparticles. As a nutrient model, lutein could be effectively encapsulated into the nanoparticles. Additionally, the nanoparticles exhibited a spherical shape and homogeneous size distribution regardless of lutein loading. The results suggested that the stable nanoparticles from proteins and strong polyelectrolyte polysaccharides would be used as a promising target delivery system for hydrophobic nutrients and drugs at physiological pH and salt conditions.

Cholesterol-lowering effects of plant steryl and stanyl laurate by oral administration in mice.

The present study was conducted to investigate the efficacy of synthesized plant steryl and stanyl laurate in lowering the cholesterol level and to further examine the cholesterol-lowering potential of the free plant sterols and stanols dissolved in liquid emulsion on serum and liver lipids in mice by oral administration. Experimental results showed that both plant steryl and stanyl laurate could significantly decrease the serum levels of TC, LDL-C, LDL-C/HDL-C, and liver cholesterol contents and markedly increase fecal cholesterol concentrations but have no effect on serum TAG level, indicating that the produced plant steryl and stanyl laurate retained the cholesterol-lowering potential of natural plant sterols and stanols. However, no statistical difference in cholesterol-lowering efficacy was observed between plant steryl laurate and plant stanyl laurate, and free plant sterols and stanols dissolved in liquid emulsion could also significantly decrease serum cholesterol levels and markedly increase fecal cholesterol excretion. These results suggested that the esterified plant sterols/stanols had comparable effects to the free plant sterols/stanols in lowering serum TC levels but that they did gain a solubility advantage from the free plant sterols/stanols. Therefore, plant steryl/stanyl laurate could be considered as a potential nutraceutical or functional ingredient to reduce or prevent atherosclerosis and its related complications.

The effect of soy protein structural modification on emulsion properties and oxidative stability of fish oil microcapsules

Hydrolysates of soy protein isolate-maltodextrin (SPI-Md) conjugate were used as wall material to prepare fish oil microcapsules by freeze-drying method. Effects of the protein structural modifications on the physicochemical properties of the emulsion and the oxidative stability of the microcapsules were characterized. Compared with emulsions of SPI-Md conjugates or soy protein isolate/maltodextrin (SPI/Md) mixture, lower droplet size (212.5-329.3nm) and polydispersity index (PDI) (0.091-0.193) were obtained in the fish oil emulsions prepared by SPI-Md conjugate hydrolysates. The improved amphiphilic property of SPI-Md conjugate hydrolysates was supported by the results of surface and interfacial tension, and further confirmed by the improved emulsion stability during the storage period. Although the microencapsulation efficiency (MEE) of SPI-Md conjugate hydrolysates slightly decreased from 97.84% to 91.47% with the increasing degree of hydrolysis (DH), their oxidative stabilities (peroxide value and headspace propanal) were apparently improved compared with native SPI/Md mixture or SPI-Md conjugates system. Moreover, favorable thermal stability as well as a porous and uniform surface structure of the microcapsules coated by SPI-Md conjugate hydrolysates (DH 2.9%) was observed via the thermal analysis and scanning electron microscope (SEM) micrographs, respectively.

Characterization of taste-active compounds of various cherry wines and their correlation with sensory attributes

Five cherry wines exhibiting marked differences in taste and mouthfeel were selected for the study. The taste and mouthfeel of cherry wines were described by four sensory terms as sour, sweet, bitter and astringent. Eight organic acids, seventeen amino acids, three sugars and tannic acid were determined by high performance liquid chromatography (HPLC). Five phenolic acids were determined by ultra performance liquid chromatography coupled with mass spectrometry (UPLC-MS). The relationship between these taste-active compounds, wine samples and sensory attributes was modeled by partial least squares regression (PLSR). The regression analysis indicated tartaric acid, methionine, proline, sucrose, glucose, fructose, asparagines, serine, glycine, threonine, phenylalanine, leucine, gallic acid, chlorogenic acid, vanillic acid, arginine and tannic acid made a great contribution to the characteristic taste or mouthfeel of cherry wines.

Lipase-mediated synthesis of water-soluble plant stanol derivatives in tert-butanol

The effects of solvents with different log P values, and of lipases on the synthesis of water-soluble plant stanol derivatives were investigated. Results showed that conversion in solvents with log P<0.37 was mainly controlled by the hydrophobicity of the solvent and subsequent complete or partial deactivation of the enzyme. The solubility of substrate was the leading factor for the conversion in solvents with log P>0.37. Lipozyme RM IM and tert-butanol was the most suitable biocatalyst and solvent, respectively. The highest yield (>51%) of plant stanyl sorbitol succinate was obtained under the selected conditions: 50 μmol/mL plant stanyl hemisuccinate, 1:3 molar ratio of plant stanyl hemisuccinate to d-sorbitol, 80 mg/mL 3 Å molecular sieves and 100mg/mL Lipozyme RM IM in tert-butanol, 150 r/min and 55 °C. Fourier transform infrared spectroscopy, mass spectroscopy and nuclear magnetic resonance spectroscopy were adopted to determine the structure of product, suggesting that water-soluble plant stanol derivatives were successfully synthesized.

Inhibiting the color formation by gradient temperature‐elevating Maillard reaction of soybean peptide‐xylose system based on interaction of l‐cysteine and Amadori compounds

Light color and savory flavor enhancer are attractive for consumers and food producers. The effect of addition time of l‐cysteine on inhibiting color formation was investigated in soybean peptide‐xylose system, and the possible pathway was explored. Once dicarbonyl compounds were formed during the Maillard reaction, the addition of l‐cysteine had no color‐inhibiting effect; if l‐cysteine was added immediately after the Amadori compound was formed, the extraordinary color‐inhibiting effect was observed. Therefore, an improved way to inhibit color formation was proposed on the basis of the interaction of l‐cysteine and Amadori compounds by controlling the addition time of l‐cysteine through gradient temperature‐elevating Maillard reaction. The system was heated at 80 °C for 60 min to form Amadori compounds, followed by the addition of L‐cysteine, and the temperature was raised to 120 °C and held for 110 min. Compared with traditional products, the lightest color product was found desirable by GC/MS analysis and sensory evaluation. The novel method proposed can be a guide for the industrial preparation of light‐colored products. Copyright