Chenyu Guo

Lyotropic liquid crystal systems in drug delivery

Lyotropic liquid crystal systems, such as reversed bicontinuous cubic and hexagonal mesophases, are attracting more and more attention because of their unique microstructures and physicochemical properties. Various bioactive molecules such as chemical drugs, peptides and proteins can be solubilized in either aqueous or oil phase and be protected from hydrolysis or oxidation. Furthermore, several studies have demonstrated sustained release of bioactive molecules from reversed cubic and hexagonal mesophases. This article gives an overview of recent advances and current status of reversed cubic and hexagonal mesophases, especially with respect to their preparation methods and applications in the field of drug delivery. In addition, potential problems and possible future research directions are highlighted.

Curcumin-loaded PLGA-PEG-PLGA triblock copolymeric micelles: Preparation, pharmacokinetics and distribution in vivo

The aim of this study was to assess the potential of new copolymeric micelles to modify the pharmacokenetics and tissue distribution of Curcumin (CUR), a hydrophobic drug. In the present study, a poly (d,l-lactide-co-glycolide)-b-poly(ethylene glycol)-b-poly(d,l-lactide-co-glycolide) (PLGA-PEG-PLGA) copolymer was synthesized and characterized by (1)H NMR, gel permeation chromatography and FTIR analysis. The CUR-loaded PLGA-PEG-PLGA micelles were prepared by dialysis method and the physicochemical parameters of the micelles such as zeta potential, size distribution and drug encapsulation were characterized. The pharmacokinetics and biodistribution of CUR-loaded micelles in vivo were evaluated. The results showed that the zeta potential of CUR-loaded micelles was about -0.71mV and the average size was 26.29nm. CUR was encapsulated into PLGA-PEG-PLGA micelles with loading capacity of 6.4±0.02% and entrapment efficiency of 70±0.34%. The plasma AUC((0-)(∞)), t(1/2α), t(1/2β) and MRT of CUR micelles were increased by 1.31, 2.48, 4.54 and 2.67 fold compared to the CUR solution, respectively. The biodistribution study in mice showed that the micelles decreased drug uptake by liver and spleen and enhanced drug distribution in lung and brain. These results suggested that PLGA-PEG-PLGA micelles would be a potential carrier for CUR.

Microemulsion-based hydrogel formulation of penciclovir for topical delivery

The purpose of this study was to investigate microemulsion-based hydrogel (MBH) as a topical delivery system for penciclovir. Topical delivery of penciclovir in the forms of microemulsion, MBH and the commercial cream was evaluated in vitro and in vivo. The results of permeation test in vivo in mice showed that compared with the commercial cream, MBH and microemulsion could significantly increase the permeation of penciclovir into both epidermis and dermis. Stability test showed that MBH stored at 4 degrees C for 3 months had no significant change in physicochemical properties. Skin irritation test in rabbit demonstrated that single application or multiple applications of MBH did not cause any erythema or edema, slight skin irritation for microemulsion. Microstructure changes of skins after administration observed under light microscope and scanning electron microscope (SEM) might result from the interaction of the ingredients of microemulsion with skins, which was related with the permeation enhancement of penciclovir. It can be concluded that the MBH could be a promising vehicle for topical delivery of penciclovir.

Preparation and evaluation of quercetin-loaded lecithin-chitosan nanoparticles for topical delivery

Background The purpose of this study was to investigate lecithin-chitosan nanoparticles as a topical delivery system for quercetin. Methods Tocopheryl propylene glycol succinate was chosen to be the surfactant for the nanosystem. The mean particle size of the nanoparticles was 95.3 nm, and the entrapment efficiency and drug loading for quercetin were 48.5% and 2.45%, respectively. Topical delivery in vitro and in vivo of the quercetin-loaded nanoparticles was evaluated using quercetin propylene glycol solution as the control. Results Compared with quercetin solution, the quercetin-loaded nanoparticles showed higher permeation ability, and significantly increased accumulation of quercetin in the skin, especially in the epidermis. Microstructure observation of the skin surface after administration indicated that the interaction between ingredients of the nanoparticles and the skin surface markedly changed the morphology of the stratum corneum and disrupted the corneocyte layers, thus facilitating the permeation and accumulation of quercetin in skin. Conclusion Lecithin-chitosan nanoparticles are a promising carrier for topical delivery of quercetin.

Preparation, characterization, pharmacokinetics, and tissue distribution of curcumin nanosuspension with TPGS as stabilizer

Background: CUR is a promising drug candidate based on its good bioactivity, but use of CUR is potentially restricted because of its poor solubility and bioavailability. Aim: The aim of this study was to prepare an aqueous formulation of curcumin nanosuspension (CUR-NS) to improve its solubility and change its in vivo behavior. Methods: CUR-NS was prepared by high-pressure homogenization method. Drug state in CUR-NS was evaluated by powder X-ray diffraction. Pharmacokinetics and biodistribution of CUR-NS after intravenous administration in rabbits and mice were studied. Results: The solubility and dissolution of CUR in the form of CUR-NS were significantly higher than those of crude CUR. X-ray crystallography diffraction indicated that the crystalline state of CUR in nanosuspension was preserved. Pharmacokinetics and biodistribution results of CUR-NS after intravenous administration in rabbits and mice showed that CUR-NS presented a markedly different pharmacokinetic property as compared to the CUR solution. AUC0−∞ of CUR-NS (700.43 ± 281.53 μg/mL, min) in plasma was approximately 3.8-fold greater than CUR solution (145.42 ± 9.29 μg/mL min), and the mean residence time (194.57 ± 32.18 versus 15.88 ± 3.56 minutes) was 11.2-fold longer. Conclusion: Nanosuspension could serve as a promising intravenous drug-delivery system for curcumin.

Preparation and characterization of intravenously injectable curcumin nanosuspension

The interest in nanosuspensions by the pharmaceutical industry is increasing given several nanosuspension products currently on the market for poorly soluble drugs. In this study, a novel dosage form for curcumin (CUR), CUR nanosuspension (CUR-NS), was successfully prepared by high pressure homogenization to improve CUR’s cytotoxicity, as well as improve its application via intravenous injection. Characterization of the CUR-NS was evaluated by morphology, size, zeta potential, solubility, dissolution rate, and crystal state of drug. The nanoparticles for CUR-NS presented a sphere-like shape under transmission electron microscopy with an average diameter of 250.6 nm and the zeta potential of CUR-NS was −27.92 mV. Solubility and dissolution rate of CUR in the form of CUR-NS were significantly increased due to the small particle size and the crystalline state of CUR was preserved to increase its stability against degradation. Superior cytotoxicity in Hela and MCF-7 cells was obtained for CUR-NS compared with CUR solution. The safety evaluation showed that, compared with the CUR solution, CUR-NS provided less local irritation and phlebitis risks, lower rate of erythrocyte hemolysis. These findings suggest that CUR-NS may represent a promising new drug formulation for intravenous administration in the treatment of certain cancers.

N-trimethyl chitosan chloride-coated liposomes for the oral delivery of curcumin

The aims of this study were to design the formulation of curcumin (CUR) liposomes coated with N-trimethyl chitosan chloride (TMC) and to evaluate in vitro release characteristics and in vivo pharmacokinetics and bioavailability of TMC-coated CUR liposomes in rats. The structure of synthesized TMC was examined by infrared spectroscopy, with the presence of trimethyl groups, and by proton nuclear magnetic resonance spectroscopy, indicating the high degree of substitution quaternization (65.6%). Liposomes, composed of soybean phosphotidylcholine, cholestrol, and D-α-tocopheryl polyethylene glycol 1000 succinate, were prepared by a thin-film dispersion method. Characteristics of the CUR liposomes, including entrapment efficiency (86.67%), drug-loading efficiency (2.33%), morphology, particle size (221.4 nm for uncoated liposomes and 657.7 nm for TMC-coated liposomes), and zeta potential (–9.63 mV for uncoated liposomes and +15.64 mV for TMC-coated liposomes) were investigated. Uncoated CUR liposomes and TMC-coated CUR liposomes showed a similar in vitro release profile. Nearly 50% of CUR was released from liposomes, whereas 80% of CUR was released from CUR propylene glycol solution. CUR incorporated into TMC-coated liposomes exhibited different pharmacokinetic parameters and enhanced bioavailability (Cmax = 46.13 μg/L, t1/2 = 12.05 hours, AUC = 416.58 μg/L·h), compared with CUR encapsulated by uncoated liposomes (Cmax = 32.12 μg/L, t1/2 = 9.79 hours, AUC = 263.77 μg/L·h) and CUR suspension (Cmax = 35.46 μg/L, t1/2 = 3.85 hours, AUC = 244.77 μg/L·h). In conclusion, oral delivery of coated CUR liposomes is a promising strategy for poorly water-soluble CUR.

Enhancement of oral bioavailability of puerarin by polybutylcyanoacrylate nanoparticles

The interest using novel drug delivery systems to improve oral bioavailability of drug with poor solubility is increasing. In this study, a new oral delivery system, polybutylcyanoacrylate nanoparticles (PBCNs), was introduced to improve the oral bioavailability of puerarin (PUE). PUE-loaded PBCN was successfully prepared by anionic polymerization method. Characterization of PUE-loaded PBCN was evaluated with morphology, size, zeta potential, and in vitro release study. The PBCN loading PUE exhibited a spherical shape under transmission electron microscopy with an average size of 159.4 nm, and the zeta potential was -15.0mV. The in vitro release of PUE-loaded PBCN showed an initial burst release followed by a sustained release. Physicochemical state of PUE in PBCN was investigated by differential scanning colorimetry, X-ray diffraction, and Fourier transform infrared spectroscopy. The results indicated that PUE in PBCN was in a noncrystalline state. The oral pharmacokinetic study in rats showed that the relative bioavailability of PUE-encapsulated PBCN to the crude PUE was more than 550%. It can be concluded that PBCN as an oral drug carrier can significantly improve the oral bioavailability of PUE.

Skin irritation and the inhibition effect on HSV-1 in vivo of penciclovir-loaded microemulsion

The purpose of the present study was to investigate the skin irritation and pharmacodynamics of penciclovir-loaded microemulsion (PCV-ME). The formulation of PCV-ME was comprised of oleic acid (OA) (5%, w/w), Cremorphor EL (20%, w/w), ethanol (30%, w/w) and water (45%, w/w). PCV-ME presented as spherically shaped under transmission electron microscopy with an average diameter of 36.5 nm, and the solubility of PCV in microemulsion (ME) was 7.41 mg/g, almost 6 times that in water. Skin irritation test was performed in male guinea pigs, which demonstrated that no irritation effect was caused after single or multiple applications of PCV-ME. Likewise, male guinea pigs were employed as animal models which were infected with herpes simplex virus type 1 (HSV-1) in pharmacodynamics study. Real-time PCR was utilized to investigate the inhibition effect on HSV-1 exerted by commercial PCV-cream and PCV-ME. The results indicated that compared with commercial PCV-cream, PCV-ME could significantly inhibit the replication of HSV-1 in skin. In conclusion, PCV-ME could be a promising formulation which possessed the virtues of low irritation and high effectiveness.

Lung-targeted delivery system of curcumin loaded gelatin microspheres.

The purpose of the study is to design and evaluate curcumin loaded gelatin microspheres (C-GMS) for effective drug delivery to the lung. C-GMS was prepared by the emulsification-linkage technique and the formulation was optimized by orthogonal design. The mean encapsulation efficiency and drug loading of the optimal C-GMS were 75.5 ± 3.82 % and 6.15 ± 0.44%, respectively. The C-GMS presented a spherical shape and smooth surface with a mean particle diameter of 18.9 μm. The in vitro drug release behavior of C-GMS followed the first-order kinetics. The tissue distribution showed that the drug concentrations at lung tissue for the C-GMS suspension were significantly higher than those for the curcumin solution, and the Ce for lung was 36.19. Histopathological studies proved C-GMS was efficient and safe to be used as a passive targeted drug delivery system to the lung. Hence, C-GMS has a great potential for the targeted delivery of curcumin to the lung.