Chiam-Wen Liew

Comparing Triflate and Hexafluorophosphate Anions of Ionic Liquids in Polymer Electrolytes for Supercapacitor Applications

Two different ionic liquid-based biopolymer electrolyte systems were prepared using a solution casting technique. Corn starch and lithium hexafluorophosphate (LiPF6) were employed as polymer and salt, respectively. Additionally, two different counteranions of ionic liquids, viz. 1-butyl-3-methylimidazolium hexafluorophosphate (BmImPF6) and 1-butyl-3-methylimidazolium trifluoromethanesulfonate (also known as 1-butyl-3-methylimidazolium triflate) (BmImTf) were used and studied in this present work. The maximum ionic conductivities of (1.47 ± 0.02) × 10−4 and (3.21 ± 0.01) × 10−4 S·cm−1 were achieved with adulteration of 50 wt% of BmImPF6 and 80 wt% of BmImTf, respectively at ambient temperature. Activated carbon-based electrodes were prepared and used in supercapacitor fabrication. Supercapacitors were then assembled using the most conducting polymer electrolyte from each system. The electrochemical properties of the supercapacitors were then analyzed. The supercapacitor containing the triflate-based biopolymer electrolyte depicted a higher specific capacitance with a wider electrochemical stability window compared to that of the hexafluorophosphate system.

Electrical, structural, thermal and electrochemical properties of corn starch-based biopolymer electrolytes

Biopolymer electrolytes containing corn starch, lithium hexafluorophosphate (LiPF6) and ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate (BmImPF6) are prepared by solution casting technique. Temperature dependence-ionic conductivity studies reveal Vogel-Tamman-Fulcher (VTF) relationship which is associated with free volume theory. Ionic liquid-based biopolymer electrolytes show lower glass transition temperature (Tg) than ionic liquid-free biopolymer electrolyte. X-ray diffraction (XRD) studies demonstrate higher amorphous region of ionic liquid-added biopolymer electrolytes. In addition, the potential stability window of the biopolymer electrolyte becomes wider and stable up to 2.9V. Conclusively, the fabricated electric double layer capacitor (EDLC) shows improved electrochemical performance upon addition of ionic liquid into the biopolymer electrolyte. The specific capacitance of EDLC based on ionic liquid-added polymer electrolyte is relatively higher than that of ionic liquid-free polymer electrolyte as depicted in cyclic voltammogram.

Investigation of ionic liquid-based poly(vinyl alcohol) proton conductor for electrochemical double-layer capacitor

Ionic liquid-based poly(vinyl alcohol) (PVA) proton-conducting polymer electrolytes are prepared using solution casting technique. The effect of adding 1-butyl-3-methylimidazolium iodide (BmImI) ionic liquid into PVA-ammonium acetate polymer system is investigated in this work. Ionic conductivity of polymer electrolytes is increased by two orders of magnitude upon inclusion of 70 wt% of BmImI. Addition of ionic liquid reduces the glass transition temperature and crystallinity of polymer electrolytes. Electrical double-layer capacitors (EDLCs) are assembled using dip-coating technique. The electrochemical properties of fabricated EDLCs are analysed using cyclic voltammetry.

Poly(ε-caprolactone)-based polymer electrolyte for electrical double-layer capacitors

The potential of electrical double-layer capacitors (EDLCs) fabricated from symmetry activated carbon electrodes and poly(ε-caprolactone) (PCL)-based polymer electrolytes (PE) have been studied. PEs that consisted of PCL, ammonium thiocyanate, and ethylene carbonate (EC) were prepared by solution casting. In this system, EC was added as a plasticizing solvent to improve the conductivity. The room temperature ionic conductivity of PE increased from 3.94 × 10−7 S cm−1 to 3.8 × 10−5 S cm−1 at 50 wt% EC. In the structural studies carried out by X-ray diffraction, it was found that addition of EC reduces the degree of crystallinity of the entire system. Temperature-dependent conductivity studies showed that Vogel–Tamman–Fulcher model fits very well with regression value close to unity. This observation demonstrates a close coupling between the ionic motion and the polymer segment mobility. The preliminary result of EDLC cell was evaluated by cyclic voltammetry. The single-electrode specific capacitance of EDLC is obtained to be 42.4 F g−1.

Poly(Acrylic acid)–Based Hybrid Inorganic–Organic Electrolytes Membrane for Electrical Double Layer Capacitors Application

Nanocomposite polymer electrolyte membranes (NCPEMs) based on poly(acrylic acid)(PAA) and titania (TiO2) are prepared by a solution casting technique. The ionic conductivity of NCPEMs increases with the weight ratio of TiO2.The highest ionic conductivity of (8.36 ± 0.01) × 10−4 S·cm−1 is obtained with addition of 6 wt % of TiO2 at ambient temperature. The complexation between PAA, LiTFSI and TiO2 is discussed in Attenuated total reflectance-Fourier Transform Infrared (ATR-FTIR) studies. Electrical double layer capacitors (EDLCs) are fabricated using the filler-free polymer electrolyte or the most conducting NCPEM and carbon-based electrodes. The electrochemical performances of fabricated EDLCs are studied through cyclic voltammetry (CV) and galvanostatic charge-discharge studies. EDLC comprising NCPEM shows the specific capacitance of 28.56 F·g−1 (or equivalent to 29.54 mF·cm−2) with excellent electrochemical stability.