Ching-Lin Tsai

Cytotoxicity and Immunological Response of Gold and Silver Nanoparticles of Different Sizes

The immunological response of macrophages to physically produced pure Au and Ag nanoparticles (NPs) (in three different sizes) is investigated in vitro. The treatment of either type of NP at > or =10 ppm dramatically decreases the population and increases the size of the macrophages. Both NPs enter the cells but only AuNPs (especially those with smaller diamter) up-regulate the expressions of proinflammatory genes interlukin-1 (IL-1), interlukin-6 (IL-6), and tumor necrosis factor (TNF-alpha). Transmission electron microscopy images show that AuNPs and AgNPs are both trapped in vesicles in the cytoplasma, but only AuNPs are organized into a circular pattern. It is speculated that part of the negatively charged AuNPs might adsorb serum protein and enter cells via the more complicated endocytotic pathway, which results in higher cytotoxicity and immunological response of AuNPs as compared to AgNPS.

Characterization and biocompatibility of chitosan nanocomposites

Chitosan nanocomposites were prepared from chitosan and gold nanoparticles (AuNPs) or silver nanoparticles (AgNPs) of ∼5 nm size. Transmission electron microscopy (TEM) showed the NPs in chitosan did not aggregate until higher concentrations (120-240 ppm). Atomic force microscopy (AFM) demonstrated that the nanocrystalline domains on chitosan surface were more evident upon addition of AuNPs (60 ppm) or AgNPs (120 ppm). Both nanocomposites showed greater elastic modulus, higher glass transition temperature (T(g)) and better cell proliferation than the pristine chitosan. Additionally, chitosan-Ag nanocomposites had antibacterial ability against Staphylococcus aureus. The potential of chitosan-Au nanocomposites as hemostatic wound dressings was evaluated in animal (rat) studies. Chitosan-Au was found to promote the repair of skin wound and hemostasis of severed hepatic portal vein. This study indicated that a small amount of NPs could induce significant changes in the physicochemical properties of chitosan, which may increase its biocompatibility and potential in wound management.

Fabrication of Precision Scaffolds Using Liquid-Frozen Deposition Manufacturing for Cartilage Tissue Engineering

The fused deposition manufacturing (FDM) system has been used to fabricate tissue-engineered scaffolds with highly interconnecting and controllable pore structure, although the system is limited to a few materials. For this reason, the liquid-frozen deposition manufacturing (LFDM) system based on an improvement of the FDM process was developed. Poly(D,L-lactide-co-glycolide) (PLGA) precision scaffolds were fabricated using LFDM from PLGA solutions of different concentrations. A greater concentration of PLGA solution resulted in greater mechanical strength but also resulted in less water content and smaller pore size on the surface of the scaffolds. LFDM scaffolds in general had mechanical strength closer to that of native articular cartilage than did FDM scaffolds. Neocartilage formation was observed in LFDM scaffolds seeded with porcine articular chondrocytes after 28 days of culture. Chondrocytes in LFDM scaffolds made from low concentrations (15-20%) of PLGA solution maintained a round shape, proliferated well, and secreted abundant extracellular matrix. In contrast, the FDM PLGA scaffolds had low cell numbers and poor matrix production because of heavy swelling. The LFDM system offered a useful way to fabricate scaffolds for cartilage tissue-engineering applications.

Neocartilage formation from mesenchymal stem cells grown in type II collagen-hyaluronan composite scaffolds

Three-dimensional (3D) collagen type II-hyaluronan (HA) composite scaffolds (CII-HA) which mimics the extracellular environment of natural cartilage were fabricated in this study. Rheological measurements demonstrated that the incorporation of HA increased the compression modulus of the scaffolds. An initial in vitro evaluation showed that scaffolds seeded with porcine chondrocytes formed cartilaginous-like tissue after 8 weeks, and HA functioned to promote the growth of chondrocytes into scaffolds. Placenta-derived multipotent cells (PDMC) and gingival fibroblasts (GF) were seeded on tissue culture polystyrene (TCPS), CII-HA films, and small intestinal submucosa (SIS) sheets for comparing their chondrogenesis differentiation potentials with those of adipose-derived adult stem cells (ADAS) and bone marrow-derived mesenchymal stem cells (BMSC). Among different cells, PDMC showed the greatest chondrogenic differentiation potential on both CII-HA films and SIS sheets upon TGF-β3 induction, followed by GF. This was evidenced by the up-regulation of chondrogenic genes (Sox9, aggrecan, and collagen type II), which was not observed for cells grown on TCPS. This finding suggested the essential role of substrate materials in the chondrogenic differentiation of PDMC and GF. Neocartilage formation was more obvious in both PDMC and GF cells plated on CII-HA composite scaffolds vs. 8-layer SIS at 28 days in vitro. Finally, implantation of PDMC/CII-HA constructs into NOD-SCID mice confirmed the formation of tissue-engineered cartilage in vivo.

Studies on interpentrating polymer networks of polyurethane and polybismaleimide. I. Polyurethane and bismaleimide-urethane copolymer

The interpenetrating polymer networks (IPNs) of polyurethane (PU) and the mixture of bismaleimide (BMI) and the 2-hydroxylethyl methacrylate (HEMA)-terminated PU prepolymer (HPU) were prepared by using a simultaneous polymerization technique. The effects of the PU molecular weight and the amounts of the PU on the mechanical properties, thermal stability, and dynamic mechanical properties are discussed. The IPNs exhibited superior ultimate tensile strength as the polyol of PU and HPU in the IPNs is based on poly(tetramethylene oxide) (PTMO) glycol of molecular weight 1000 (PTMO1000). Izod impact property of the IPNs indicated that the PU(PTMO1000)/BMI-HPU(PTMO1000) IPNs had much more significant improvement than that of the PU(PTM02000)/BMI-HPU(PTMO2000) IPNs. Better thermal stability was shown by the IPNs as compared with the components of the networks, i.e. PU or BMI-HPU copolymers. The dynamic mechanical analysis (DMA) indicates that these IPNs show various shifts in the loss moduli(E”) at the high and low temperature transition peaks for various molecular weight of the polyol employed in the PU. Better compatibility between BMI and PU was found as the PU(PTMO1000) was employed.