Chintan Vora

Risk based approach for design and optimization of stomach specific delivery of rifampicin.

The research envisaged focuses on risk management approach for better recognizing the risks, ways to mitigate them and propose a control strategy for the development of rifampicin gastroretentive tablets. Risk assessment using failure mode and effects analysis (FMEA) was done to depict the effects of specific failure modes related to respective formulation/process variable. A Box-Behnken design was used to investigate the effect of amount of sodium bicarbonate (X1), pore former HPMC (X2) and glyceryl behenate (X3) on percent drug release at 1st hour (Q1), 4th hour (Q4), 8th hour (Q8) and floating lag time (min). Main effects and interaction plots were generated to study effects of variables. Selection of the optimized formulation was done using desirability function and overlay contour plots. The optimized formulation exhibited Q1 of 20.9%, Q4 of 59.1%, Q8 of 94.8% and floating lag time of 4.0 min. Akaike information criteria and Model selection criteria revealed that the model was best described by Korsmeyer-Peppas power law. The residual plots demonstrated no existence of non-normality, skewness or outliers. The composite desirability for optimized formulation computed using equations and software were 0.84 and 0.86 respectively. FTIR, DSC and PXRD studies ruled out drug polymer interaction due to thermal treatment.

Recent patents and advances on anti - tuberculosis drug delivery and formulations.

Tuberculosis has remained, unambiguously, a significant health care problem since long times, particularly in developing countries. The endeavoring battle against multi drug resistant TB, multiple dosing, their prominent side effects and bioavailability hiccups related to fixed dose combinations has undeniably become a Herculean task indicating rigorous research requirement in anti TB drug therapy. In view of the fact that patenting a drug molecule, a drug delivery system or a formulation has been very fruitful for the growth and sustainment of pharmaceutical industry, a meticulous review of recent developments, providing a balanced view on merits/demerits, will facilitate researchers to update themselves, thereby focusing their research in more relevant areas to furnish desired quality traits. This article reviews the present scenario in terms of drug delivery approaches for TB chemotherapy. The review encompasses and summarizes recent patents and advances on variegated facets of dosage forms, together with from conventional solid oral to novel controlled release oral formulations and additionally alternative weapons for anti TB drug delivery. A critical review of multidisciplinary approaches to boost anti TB therapy may facilitate the scientists to resolve existing technological gaps.

Preparation and characterization of dipyridamole solid dispersions for stabilization of supersaturation: effect of precipitation inhibitors type and molecular weight

Abstract Dipyridamole (DPL) is a weakly basic BCS class II drug which precipitates upon entering into intestine leading to pH dependant and variable absorption. Thus, research envisaged focuses on developing formulations that maintain supersaturation following upon acid to neutral pH transition. In an endeavor to accomplish the objective, solid dispersion (SD) with hydroxypropylmethyl cellulose (HPMC) and polyvinylpyrrolidone (PVP) was prepared by a quench cooling method. The three molecular weight grades of HPMC (HPMC E5, HPMC E15 and HPMC E50) and two molecular weight grades of PVP (PVP K30 and PVP K90) were investigated to observe effect of increasing molecular weight on stabilizing DPL supersaturated solutions. Equilibrium solubility studies revealed increase in solubility with both HPMC and PVP with greater benefit from HPMC. In vitro supersaturated dissolution results demonstrated that HPMC formulations provided greater degree and extent of supersaturation as compared to PVP formulations. The formulation with HPMC E50 provided maximum stabilization to supersaturation upon acid to neutral pH transition. Moreover, the effect of increase in molecular weight was more pronounced in HPMC rather than PVP. Stronger interactions were observed for DPL with HPMC, while no interaction was observed with PVP which was evident from Fourier transform infra-red studies. Differential scanning calorimetry and powder X-ray diffraction studies revealed the amorphous state of DPL in SD.

Investigating effects of hydroxypropyl methylcellulose (HPMC) molecular weight grades on lag time of press-coated ethylcellulose tablets

Abstract The research undertaken exemplifies the effects of hydroxypropyl methylcellulose (HPMC) molecular weight (MW) grades of on lag time of press-coated ethylcellulose (EC) tablets. The formulation comprised an immediate release core (containing prednisone as a model drug) surrounded by compression coating with variegated EC-HPMC blends. Five selected HPMC grades (E5, E15, E50, K100LV and K4M) were explored at three different concentrations (10% w/w, 20% w/w and 30% w/w in outer coat) to understand their effects on lag time and drug release. In vitro drug release testing demonstrated that, with increase in concentration of E5 and E15, up to 30% w/w, the mean lag time decreased progressively; whereas with remaining grades, the mean lag time initially decreased up to 20% w/w level and thereafter increased for 30% w/w level. Importantly, with increase in HPMC concentration in the outer coat, the variability in lag time (%RSD; n = 6) was decreased for each of E5, E15 and E50, whereas increased for K100LV and K4M. In general, the variability in lag time was increased with increase in HPMC MW at studied concentration levels. Markedly, tablets with 30% w/w K4M in outer coat exhibited slight premature release (before the rupture of outer coat) along with high variability in lag time. Overall, the study concluded that low MW HPMCs (E5, E15 and E50) were found rather efficient than higher MW HPMCs for developing robust EC-based press-coated pulsatile release formulations where precise lag time followed by sharp burst release is desired.

Investigating critical effects of variegated lubricants, glidants and hydrophilic additives on lag time of press coated ethylcellulose tablets

Abstract The research envisaged focuses on vital impacts of variegated lubricants, glidants and hydrophilic additives on lag time of press coated ethylcellulose (EC) tablets using prednisone as a model drug. Several lubricants and glidants such as magnesium stearate, colloidal SiO2, sodium stearyl fumarate, talc, stearic acid, polyethylene glycol (6000) and glyceryl behenate were investigated to understand their effects on lag time by changing their concentrations in outer coat. Further, the effects of hydrophilic additives on lag time were examined for hydroxypropylmethylcellulose (E5), hydroxypropylcellulose (EF and SSL), povidone (K30), copovidone, polyethylene glycol (4000), lactose and mannitol. In vitro drug release testing revealed that each selected lubricant/glidant, if present even at concentration of 0.25% w/w, significantly reduced the lag time of press coated tablets. Specifically, colloidal SiO2 and/or magnesium stearate were detrimental while other lubricants/glidants were relatively less injurious. Among hydrophilic additives, freely water soluble fillers had utmost influence in lag time, whereas, comparatively less impact was observed with polymeric binders. Concisely, glidant and lubricant should be chosen to have minimal impact on lag time and further judicious selection of hydrophilic additives should be exercised for modulating lag time of pulsatile release formulations.

Formulation Development, Process Optimization, and In Vitro Characterization of Spray-Dried Lansoprazole Enteric Microparticles

This research focuses on the development of enteric microparticles of lansoprazole in a single step by employing the spray drying technique and studies the effects of variegated formulation/process variables on entrapment efficiency and in vitro gastric resistance. Preliminary trials were undertaken to optimize the type of Eudragit and its various levels. Further trials included the incorporation of plasticizer triethyl citrate and combinations of other polymers with Eudragit S 100. Finally, various process parameters were varied to investigate their effects on microparticle properties. The results revealed Eudragit S 100 as the paramount polymer giving the highest gastric resistance in comparison to Eudragit L 100-55 and L 100 due to its higher pH threshold and its polymeric backbone. Incorporation of plasticizer not only influenced entrapment efficiency, but diminished gastric resistance severely. On the contrary, polymeric combinations reduced entrapment efficiency for both sodium alginate and glyceryl behenate, but significantly influenced gastric resistance for only sodium alginate and not for glyceryl behenate. The optimized process parameters were comprised of an inlet temperature of 150°C, atomizing air pressure of 2 kg/cm2, feed solution concentration of 6% w/w, feed solution spray rate of 3 ml/min, and aspirator volume of 90%. The SEM analysis revealed smooth and spherical shape morphologies. The DSC and PXRD study divulged the amorphous nature of the drug. Regarding stability, the product was found to be stable under 3 months of accelerated and long-term stability conditions as per ICH Q1A(R2) guidelines. Thus, the technique offers a simple means to generate polymeric enteric microparticles that are ready to formulate and can be directly filled into hard gelatin capsules.

A newfangled study using risk silhouette and uncertainty approximation for quantification of acyclovir in diverse formulation

Risk assessment and uncertainty approximation are two major and important parameters that need to be adopted for the development of pharmaceutical process to ensure reliable results. Additionally, there is a need to switch from the traditional method validation checklist to provide a high level of assurance of method reliability to measure quality attribute of a drug product. In the present work, evaluation of risk profile, combined standard uncertainty and expanded uncertainty in the analysis of acyclovir were studied. Uncertainty was calculated using cause-effect approach, and to make it more accurately applicable a method was validated in our laboratory as per the ICH guidelines. While assessing the results of validation, the calibration model was justified by the lack of fit and Levene׳s test. Risk profile represents the future applications of this method. In uncertainty the major contribution is due to sample concentration and mass. This work demonstrates the application of theoretical concepts of calibration model tests, relative bias, risk profile and uncertainty in routine methods used for analysis in pharmaceutical field.