Chiu-Yu Cheng

Biological decolorization of dye solution containing malachite green by Pandoraea pulmonicola YC32 using a batch and continuous system.

In our study, we have isolated a relatively newly identified bacteria species, Pandoraea pulmonicola YC32, and first assessed its capability to treat malachite green (MG). The effects of various factors on decolorization efficiency were investigated in a batch system. The decolorization efficiency was found to be optimal within a pH of 7-10 and it increased, with increasing initial MG concentration up to 100 mg/l. The relationship between the decolorization rate and MG concentration agreed with Lineweaver-Burk equation. The apparent kinetic parameters, R(MG,max) and K(m), were 6.23 mg-MG/g-cell/h and 153.4 mg/l, respectively. The initial step in the biodegradation pathway of MG by P. pulmonicola YC32 was a reduction or N-demethylation reaction. We achieved a decolorization efficiency of 85.2% with 50mg/l MG in the immobilized P. pulmonicola YC32 continuous column system. This is the first report on the application of a continuous column system to decolorize MG using a microorganism.

Structure of the bacterial community in a biofilter during dimethyl sulfide (DMS) removal processes.

We report here both the successful treatment of DMS in a biofilter and the dynamic changes that occur in the composition of the bacterial community of the biofilter during this process. Denaturing gradient gel electrophoresis of eubacterial 16S rDNA samples taken from packing material at different DMS removal stages revealed 11 distinct bands. Phylogenetic analysis showed that the sequences of these bands were closest to sequences of species of the Proteobacteria, Firmicutes, and Actinobacteria. The specific occurrence of these bacterial species varied mainly with DMS load, but it was also affected by the addition of glucose and by ambient temperature. Based on the characteristics of the identified species, the system is conducive for such processes as sulfur oxidation, sulfate reduction, carbon oxidation, and fermentation. The strains identified in this study are potential candidates for purifying waste gas effluents containing DMS gas.

Effects of Operating Parameters on Measurements of Biochemical Oxygen Demand Using a Mediatorless Microbial Fuel Cell Biosensor

The conventional Biochemical Oxygen Demand (BOD) method takes five days to analyze samples. A microbial fuel cell (MFC) may be an alternate tool for rapid BOD determination in water. However, a MFC biosensor for continuous BOD measurements of water samples is still unavailable. In this study, a MFC biosensor inoculated with known mixed cultures was used to determine the BOD concentration. Effects of important parameters on establishing a calibration curve between the BOD concentration and output signal from the MFC were evaluated. The results indicate monosaccharides were good fuel, and methionine, phenylalanine, and ethanol were poor fuels for electricity generation by the MFC. Ions in the influent did not significantly affect the MFC performance. CN− in the influent could alleviate the effect of antagonistic electron acceptors on the MFC performance. The regression equation for BOD concentration and current density of the biosensor was y = 0.0145x + 0.3317. It was adopted to measure accurately and continuously the BOD concentration in actual water samples at an acceptable error margin. These results clearly show the developed MFC biosensor has great potential as an alternative BOD sensing device for online measurements of wastewater BOD.

Hexavalent chromium removal and bioelectricity generation by Ochrobactrum sp. YC211 under different oxygen conditions

ABSTRACT Bioremediation is an environmentally friendly method of reducing heavy metal concentration and toxicity. A chromium-reducing bacterial strain, isolated from the vicinity of an electroplate factory, was identified as Ochrobactrum sp. YC211. The efficiency and capacity per time of Ochrobactrum sp. YC211 for hexavalent chromium (Cr(VI)) removal under anaerobic conditions were superior to those under aerobic conditions. An acceptable removal efficiency (96.5 ± 0.6%) corresponding to 30.2 ± 0.8 mg-Cr (g-dry cell weight-h)−1 was achieved by Ochrobactrum sp. YC211 at 300 mg L−1 Cr(VI). A temperature of 30°C and pH 7 were the optimal parameters for Cr(VI) removal. By examining reactivated cells, permeabilized cells, and cell-free extract, we determined that Cr(VI) removal by Ochrobactrum sp. YC211 under anaerobic conditions mainly occurred in the soluble fraction of the cell and can be regarded as an enzymatic reaction. The results also indicated that an Ochrobactrum sp. YC211 microbial fuel cell (MFC) with an anaerobic anode was considerably superior to that with an aerobic anode in bioelectricity generation and Cr(VI) removal. The maximum power density and Cr(VI) removal efficiency of the MFC were 445 ± 3.2 mW m−2 and 97.2 ± 0.3%, respectively. Additionally, the effects of coexisting ions (Cu2+, Zn2+, Ni2+, SO42−, and Cl−) in the anolyte on the MFC performance and Cr(VI) removal were nonsignificant (P > 0.05). To our knowledge, this is the first report to compare Cr(VI) removal by different cells and MFC types under aerobic and anaerobic conditions.

Decolorization characteristics and mechanism of Victoria Blue R removal by Acinetobacter calcoaceticus YC210

Acinetobacter calcoaceticus YC210 has been isolated and its ability to remove Victoria Blue R (VBR) from aqueous solution was assessed. The effects of various factors on decolorization efficiency were investigated in a batch system. The decolorization efficiency was found to be optimal within a pH of 5-7 and increased with VBR concentration up to 450 mg/l with high efficiency (94.5%) in a short time. The decolorization efficiency was significantly affected by cell concentrations. The decolorization of VBR by A. calcoaceticus YC210 followed first order kinetics. The apparent kinetic parameters of the Lineweaver-Burk equation, R(VBR,max) and K(m), were calculated as 6.93 mg-VBR/g-cell/h and 175.8 mg/l, respectively. Based on the biodegradation products, VBR degradation by A. calcoaceticus YC210 involves a stepwise demethylation process to yield partially dealkylated VBR species. To our knowledge, this is the first report using microbes to remove VBR. It clearly demonstrates the dealkylation pathway of VBR degradation.

Diversity of the bacterial community in a bioreactor during ammonia gas removal

Polymerase chain reaction analysis in combination with denaturing gradient gel electrophoresis (DGGE) was used to determine changes in the composition of the bacterial community of a bioreactor during ammonia removal. A minimum of 13 bands were observed in the DGGE profile. Phylogenetic analysis revealed that phylum Proteobacteria was predominantly represented in the bacterial community of the bioreactor, followed by Firmicutes, Actinobacteria, and Flavobacteriaceae. However, the occurrence and predominance of specific bacterial species varied with the concentrations of NH(3) introduced into the bioreactor. The complexity of the bacterial species generally decreased with increasing inlet NH(3) concentration. Based on the characteristics of the identified species, there is a potential for nitrification, denitrification, nitrate reduction, nitrite reduction, and ammonia assimilation to occur simultaneously in the bioreactor. The strains identified in this study are potential candidate strains for the purification of waste gases containing high concentrations of NH(3).

Utility of Ochrobactrum anthropi YC152 in a Microbial Fuel Cell as an Early Warning Device for Hexavalent Chromium Determination

Fast hexavalent chromium (Cr(VI)) determination is important for environmental risk and health-related considerations. We used a microbial fuel cell-based biosensor inoculated with a facultatively anaerobic, Cr(VI)-reducing, and exoelectrogenic Ochrobactrum anthropi YC152 to determine the Cr(VI) concentration in water. The results indicated that O. anthropi YC152 exhibited high adaptability to pH, temperature, salinity, and water quality under anaerobic conditions. The stable performance of the microbial fuel cell (MFC)-based biosensor indicated its potential as a reliable biosensor system. The MFC voltage decreased as the Cr(VI) concentration in the MFC increased. Two satisfactory linear relationships were observed between the Cr(VI) concentration and voltage output for various Cr(VI) concentration ranges (0.0125–0.3 mg/L and 0.3–5 mg/L). The MFC biosensor is a simple device that can accurately measure Cr(VI) concentrations in drinking water, groundwater, and electroplating wastewater in 45 min with low deviations (<10%). The use of the biosensor can help in preventing the violation of effluent regulations and the maximum allowable concentration of Cr(VI) in water. Thus, the developed MFC biosensor has potential as an early warning detection device for Cr(VI) determination even if O. anthropi YC152 is a possible opportunistic pathogen.

Comparisons of Vibrio fischeri, Photobacterium phosphoreum, and recombinant luminescent using Escherichia coli as BOD measurement.

To shorten the time needed to measure biochemical oxygen demand (BOD) in water samples and to provide a rapid feedback of the real condition of water quality, we tested and evaluated the validity and reliability of luminescent bacteria Vibrio fischeri, Photobacterium phosphoreum, and recombinant Escherichia coli as potential indicators of BOD in the domestic wastewaters. The results indicate that the luminescence intensities of these strains are dependent on temperature, pH, and BOD concentration. In comparison to the standard BOD5 method, the time needed for BOD measurement can be shortened by 90, 120, and 150 min when V. fischeri, P. phosphoreum, and recombinant E. coli, respectively, are used. Recombinant E. coli can be adapted to measure BOD in domestic wastewater containing a wide range of BOD concentrations, V. fischeri is not suitable for measuring diluted wastewater, and P. phosphoreum has only a limited application in measuring concentrated wastewater. To the best of our knowledge, this is the first report in which V. fischeri, P. phosphoreum, and recombinant luminescent E. coli are compared in terms of their potential in BOD measurement systems.

Microbial Fuel Cell Inoculated with Ochrobactrum Tritici KCC210 for Chromium (VI) Measurement in Electroplating Wastewater

Many methods/techniques have been developed for Cr(VI) measurement, but they are often conducted offsite or/and cannot provide real-time for Cr(VI) monitoring. A microbial fuel cell (MFC) is a self-sustaining device and has great potential as a biosensor for in situ Cr(VI) measurement, especially for wastewater generated from different electroplating units. In this study, Ochrobactrum tritici KCC210, a facultatively anaerobic, Cr(VI)-reducing, and exoelectrogenic bacterium, was isolated and inoculated into the MFC to evaluate its feasibility as a Cr(VI) biosensor. The results indicated that O. tritici KCC210 exhibited high adaptability to pH, and temperature under anaerobic conditions. The maximum power density of the MFC biosensor was 17.5±0.9 mW/m2 at 2,000 Ω. A good linear relationship was observed between the Cr(VI) concentration (10–80 mg/L) and voltage output. The stable performance of the MFC biosensor indicated its potential as a reliable biosensor system. Moreover, the developed MFC biosensor is a simple device that can accurately measure Cr(VI) concentrations in the actual electroplating wastewater generated from different electroplating units within 15 min with low deviations (–1.8% to 7.8%) in comparison with the values determined using standard method. Thus, the MFC biosensor can measure Cr(VI) concentrations in situ in the effluents and has potential as an early warning detection device.