Christel Sebastian

Micropollutants in urban stormwater: occurrence, concentrations, and atmospheric contributions for a wide range of contaminants in three French catchments

This study aimed at: (a) providing information on the occurrence and concentration ranges in urban stormwater for a wide array of pollutants (n = 77); (b) assessing whether despite the differences between various catchments (land use, climatic conditions, etc.), the trends in terms of contamination level are similar; and (c) analyzing the contribution of total atmospheric fallout (TAF) with respect to sources endogenous to this contamination. The studied contaminants include conventional stormwater contaminants (polycyclic aromatic hydrocarbons (PAHs), Zn, Cu, Pb, etc.), in addition to poorly or undocumented pollutants such as nonylphenol and octylphenol ethoxylates (NPnEO and OPnEO), bisphenol A (BPA), polybrominated diphenyl ethers (PBDEs), a wide variety of pesticides, and various metals of relevance (As, Ti, Sr, V). Sampling and analysis were performed using homogeneous methods on three urban catchments with different land use patterns located in three distinct French towns. For many of these pollutants, the results do not allow highlighting a significant difference in stormwater quality at the scale of the three urban catchments considered. Significant differences were, however, observed for several metals (As, Cr, Cu, Ni, Sr and Zn), PAHs, and PBDEs, though this assessment would need to be confirmed by further experiments. The pollutant distributions between dissolved and particulate phases were found to be similar across the three experimental sites, thus suggesting no site dependence. Lastly, the contributions of TAF to stormwater contamination for micropollutants were quite low. This finding held true not only for PAHs, as previously demonstrated in the literature, but also for a broader range of molecules such as BPA, NPnEO, OPnEO, and PBDEs, whose high local production is correlated with the leaching of urban surfaces, buildings, and vehicles.

Computational fluid dynamics modelling of flow and particulate contaminants sedimentation in an urban stormwater detention and settling basin

Sedimentation is a common but complex phenomenon in the urban drainage system. The settling mechanisms involved in detention basins are still not well understood. The lack of knowledge on sediment transport and settling processes in actual detention basins is still an obstacle to the optimization of the design and the management of the stormwater detention basins. In order to well understand the sedimentation processes, in this paper, a new boundary condition as an attempt to represent the sedimentation processes based on particle tracking approach is presented. The proposed boundary condition is based on the assumption that the flow turbulent kinetic energy near the bottom plays an important role on the sedimentation processes. The simulated results show that the proposed boundary condition appears as a potential capability to identify the preferential sediment zones and to predict the trapping efficiency of the basin during storm events.

Event-based quantification of emerging pollutant removal for an open stormwater retention basin - loads, efficiency and importance of uncertainties.

Up to now, emerging contaminants have not been further-studied in in-situ stormwater best management practices and especially in detention basins. In this article, the efficiency of a dry stormwater detention basin was investigated regarding the removal of 7 alkylphenols and alkylphenol ethoxylates, 9 polybrominated diphenyl ethers, 45 pesticides and bisphenol A. Concentrations of contaminants were obtained by chemical analysis on dissolved and particulate phase distinctly. The removal efficiency was assessed on total, dissolved and particulate phase accounting for the global chain of uncertainty with a 95% confidence interval. Results showed that pesticides (rather hydrophilic) are not trapped in the detention basin but are released contrarily to B209 which is mostly in particulate phase. Alkylphenols and alkylphenol ethoxylates are present in both phases and the efficiency is storm event-dependent. Uncertainty consideration in efficiency determination revealed efficiency data, usually presented by raw values are not relevant to conclude on the performance of a detention basin. In this case study, efficiency data with a 95% confidence interval indicate that only 35%, 50% and 41% of campaigns showed an impact (in trapping or releasing) of the detention basin on alkylphenols and ethoxylates, polybrominated diphenyl ethers and pesticides respectively.

Stormwater retention basin efficiency regarding micropollutant loads and ecotoxicity.

Retention basin efficiency in micropollutant removal has not been very well studied, in particular for pollutants highlighted by the European Water Framework Directive of 2000 such as pesticides, polybrominated diphenyl ethers (PBDEs) and alkylphenols. This study is based on in situ experiments carried out on a stormwater retention basin with the aim of estimating the basin efficiency in trapping and removing micropollutants from stormwater run-off from an industrial catchment drained by a separate sewer system. Along with stormwater, the basin receives some dry weather effluent flows, which are supposedly non-polluted. Ninety-four substances from five families (metals, polycyclic aromatic hydrocarbons (PAHs), PBDEs, alkylphenols and pesticides) were analyzed during 10 event campaigns in urban wet weather discharges at the inlet and outlet of the basin. The ecotoxicity of the samples was also tested. The results show high inter-event variability in both chemical and ecotoxic characteristics. They indicate good event efficiency concerning heavy metals and most PAHs. The studied pesticides, mainly found in the dissolved fraction, were not trapped. Particulate fraction study highlighted that settling is not the main process explaining micropollutant removal in a retention basin, as was noted for alkylphenols and PBDEs.

Spatial variability of sediment ecotoxicity in a large storm water detention basin

Detention basins are valuable facilities for urban storm water management, from both the standpoint of flood control and the trapping of pollutants. Studies performed on storm water have shown that suspended solids often constitute the main vector of pollutants (heavy metals, polycyclic aromatic hydrocarbon (PAH), etc.). In order to characterise the ecotoxicity of urban sediments from storm water detention basins, the sediments accumulated over a 6-year period were sampled at five different points through the surface of a large detention basin localised in the east of Lyon, France. A specific ecotoxicological test battery was implemented on the solid phase (raw sediment) and the liquid phase (interstitial water of sediments). The results of the study validated the method formulated for the ecotoxicological characterization of urban sediments. They show that the ecotoxicological effect of the sediments over the basin is heterogeneous and greater in areas often flooded. They also show the relationship between, on one hand, the physical and chemical characteristics of the sediments and, on the other hand, their ecotoxicity. Lastly, they contribute to a better understanding of the dynamics of the pollution close to the bottom of detention basins, which can be useful for improving their design. The results of this research raise particularly the issue of using oil separators on the surface of detention basins.

Ecotoxicological characterisation of sediments from stormwater retention basins

Retention-detention basins are important structures for managing stormwater. However, their long-term operation raises the problem of managing the sediments they accumulate. Potential uses for such sediments have been envisaged, but each sediment must be characterised beforehand to verify its harmlessness. In this paper we address this issue through the development of a battery of bioassays specifically adapted to such sediments. We tested the method on samples taken from four retention basins in the region of Lyon (France). This battery focuses on the toxic effects linked to both the solid phase (ostracod and Microtox(®) solid-phase tests) and the liquid-phase (interstitial water) of sediments (rotifer and Microtox(®) liquid-phase tests). The results obtained permit the sorting of sediments presenting little toxicity, and which could therefore be potentially exploitable, from those from more polluted areas presenting higher toxicity that limits their use.

The SIPIBEL project: treatment of hospital and urban wastewater in a conventional urban wastewater treatment plant

AbstractHospital wastewater (HWW) receives increasing attention because of its specific composition and higher concentrations of some micropollutants. Better knowledge of HWW is needed in order to improve management strategies and to ensure the preservation of wastewater treatment efficiency and freshwater ecosystems. This context pushed forward the development of a pilot study site named Site Pilote de Bellecombe (SIPIBEL), which collects and treats HWW separately from urban wastewater, applying the same conventional treatment process. This particular configuration offers the opportunity for various scientific investigations. It enables to compare hospital and urban wastewater, the efficiency of the two parallel treatment lines, and the composition of the resulting hospital and urban treated effluents, as well as the evaluation of their effects on the environment. The study site takes into account environmental, economic, and social issues and promotes scientific and technical multidisciplinary actions. ᅟ

Priority substances in accumulated sediments in a stormwater detention basin from an industrial area

One of the most adopted solutions in developed countries to manage stormwater is detention/retention basins which generate large quantities of sediments that have to be removed regularly. In order to manage them properly, accurate data are needed about their physical and chemical characteristics, particularly on micropollutant concentrations and their associated risk. This work consisted in a two-year sampling of dry sediments from a detention-settling basin. Priority substances, including pesticides, polybrominated diphenyl ethers (PBDE), alkylphenols and bisphenol A (BPA), were monitored. Different sites in the basin bottom were sampled in order to investigate spatial distribution of the contamination. Results show that the increase of the sediment thickness in the basin was heterogeneous with a maximum of 15 cm after two years. Pesticides and PBDE were, if detected, mainly found in low concentrations from 2 ng/g to 286 ng/g. Conversely, alkylphenols and bisphenol A were always quantified at concentrations varying from 6 ng/g to 3400 ng/g. These high levels suggest that these sediments should be managed with precautions. Spatial heterogeneity of alkylphenol ethoxylates and BPA concentrations was observed, with higher contamination of alkylphenol ethoxylates in anaerobic zones and BPA levels correlated with total organic carbon and in a lesser extent to fine particles.